Federal Aviation Administration June 4, 2013 – Federal Register Recent Federal Regulation Documents

This action proposes to establish Class E Airspace at Umatilla, FL, to accommodate the Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedures at Umatilla Municipal Airport. This action would enhance the safety and airspace management of Instrument Flight Rules (IFR) operations at the airport.

We are adopting a new airworthiness directive (AD) for certain Embraer S.A. Model ERJ 190 airplanes. This AD was prompted by reports of cracks on the side stay of the main landing gear (MLG). This AD requires repetitive measurements of the left-hand (LH) and right-hand (RH) MLG side stay support fitting to detect bushing migration, and eventual replacement of the bushing; and a detailed inspection for damage on the LH and RH MLG side stay support assembly, and related investigative and corrective actions if necessary. We are issuing this AD to prevent excessive bearing friction, which might compromise the MLG free fall extension and cause fatigue cracking on the MLG side stay and on its support assembly, resulting in reduced structural integrity of the MLG.

We are adopting a new airworthiness directive (AD) for certain Dassault Aviation Model Mystere-Falcon 900 and Falcon 900EX airplanes. This AD was prompted by reports of chafing between the tail strobe power supply and a hydraulic line. This AD requires modifying the tail strobe power supply wire routing. We are issuing this AD to prevent chafing between the tail strobe power supply and a hydraulic line, which could result in hydraulic fluid leakage and possible fire due to arcing, and consequent loss of control of the airplane due to structural failure of the tail.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes; Model 767-200, -300, -300F, and -400ER series airplanes; and Model 777-200, -200LR, -300, and -300ER series airplanes. This AD was prompted by operator or in-service reports of burned Boeing Material Specification (BMS) 8-39 urethane foam, and a report from the airplane manufacturer indicating that airplanes were assembled, throughout various areas of the airplane (including flight deck and cargo compartments), with seals made of BMS 8-39 urethane foam, a material with fire-retardant properties that deteriorate with age. This AD requires replacing certain seals made of BMS 8-39 urethane foam. We are issuing this AD to prevent the failure of urethane seals to maintain sufficient Halon concentrations in the cargo compartments to extinguish or contain fire or smoke, and to prevent penetration of fire or smoke in areas of the airplane that are difficult to access for fire and smoke detection or suppression.