Federal Aviation Administration June 27, 2011 – Federal Register Recent Federal Regulation Documents
Results 1 - 10 of 10
Airworthiness Directives; Dassault Aviation Model FALCON 7X Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This emergency AD was sent previously to all known U.S. owners and operators of these airplanes. This AD requires that, as of the effective date of the AD, operation of Model FALCON 7X airplanes is prohibited. This AD was prompted by a report of an uncontrolled pitch trim runaway during descent. We are issuing this AD to prevent loss of control of the airplane.
Establishment of Helicopter Area Navigation (RNAV) Routes; Northeast United States
This action establishes helicopter RNAV routes as part of the U.S. air traffic service route (ATS) structure and designates two helicopter RNAV routes (TK-routes) in the northeast corridor between the Washington, DC, and New York City metropolitan areas. The TK-routes are for use by helicopters having IFR-approved Global Positioning System (GPS)/Global Navigation Satellite System (GNSS) equipment. The FAA is taking this action to enhance safety and to improve the efficient use of the navigable airspace for en route IFR helicopter operations.
Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Learjet Inc. Model 45 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. That AD currently requires, for certain airplanes, repetitive inspections for chafing and other damage of the case drain tube from the hydraulic pump case installed on the left-hand engine, and corrective action if necessary. That AD also requires, for all airplanes, repetitive inspections for discrepancies of the left engine's nacelle tubing, repetitive inspections for evidence of fluid leakage within the left engine accessory compartment, and corrective actions if necessary. This new AD also requires replacing the left engine fuel and hydraulic tubing and installing a tubing support channel, which terminates the repetitive inspections required in the existing AD. This new AD also removes airplanes from the applicability. This AD was prompted by reports of chafed hydraulic tubes in the left- hand engine. We are issuing this AD to prevent chafed hydraulic tubes in the left-hand engine and consequent hydraulic tube failure and uncontrolled loss of flammable fluid within the engine cowling, which could result in a fire in the engine nacelle and loss of control of the airplane.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-120, -120ER, -120FC, -120QC, and -120RT Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier, Inc. Model DHC-8-400 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A330-200 and -300 Series Airplanes
We are superseding an existing airworthiness directive (AD) that applies to the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: * * * * * The airworthiness limitations applicable to the Certification Maintenance Requirements (CMR) are given in Airbus A330 ALS Part 3, which is approved by the European Aviation Safety Agency (EASA). The revision 03 of Airbus A330 ALS Part 3 introduces more restrictive maintenance requirements and/or airworthiness limitations. Failure to comply with this revision constitutes an unsafe condition. * * * * * The unsafe condition is safety-significant latent failures that would, in combination with one or more other specific failures or events, result in a hazardous or catastrophic failure condition. We are issuing this AD to require actions to correct the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc. Model DHC-8-400 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
