Federal Aviation Administration July 13, 2010 – Federal Register Recent Federal Regulation Documents
Results 1 - 12 of 12
Airworthiness Directives; Airbus Model A330-200 and A330-300 Series Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: An A330 experienced an uncommanded engine 1 in flight spool down, which occurred while applying fuel gravity feed procedure, in response to low pressure indications from all fuel boost pumps, in both left and right wings. The investigations revealed that the wing tank pressure switches P/N (part number) HTE69000-1 had frozen due to water accumulated in their external part, causing spurious low pressure indications. As per procedure, the main pumps are then switched off, increasing the level of unavailable fuel. This, in combination with very low fuel quantities or another independent trapped fuel failure scenarios, can lead to fuel starvation on the affected engine(s). The proposed AD would require actions that are
Airworthiness Directives; Airbus Model A310 Series Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: Analysis performed in the frame of the Extended Service Goal has led Airbus to modify the inspection programme [modification of thresholds, intervals and associated configurations] which is currently required by DGAC (Direction G[eacute]n[eacute]rale de l'Aviation Civile) France AD F-2005-001. This modified inspection programme is necessary to detect and prevent damage associated with a structural fatigue phenomenon of the rear spar internal angle and the tee fitting located in the centre wing box. This condition, if not corrected, could affect the structural integrity of the centre wing box. The unsafe condition is reduced structural integrity of the wings. The proposed AD would require actions that are
Airworthiness Directives; The Boeing Company Model 757 Airplanes, Model 767 Airplanes, and Model 777-200 and -300 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Model 757 airplanes, Model 767 airplanes, and Model 777-200 and -300 series airplanes. This AD requires repetitive inspections for damage of the electrical terminal at the left and right flightdeck window 1, and corrective actions if necessary. This AD also allows for replacing the flightdeck window 1 with a new improved flightdeck window equipped with different electrical connections, which terminates the repetitive inspections for that flightdeck window 1. This AD results from several reports of electrical arcs at the terminal blocks of the electrically heated flightdeck window 1. We are issuing this AD to prevent smoke and fire in the cockpit, which could lead to loss of visibility, and injuries to or incapacitation of the flightcrew.
Airworthiness Directives; Thielert Aircraft Engines GmbH Model TAE 125-01 Reciprocating Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; McCauley Propeller Systems Model 4HFR34C653/L106FA Propellers
The FAA is adopting a new airworthiness directive (AD) for McCauley Propeller Systems model 4HFR34C653/L106FA propellers. This AD requires a onetime fluorescent penetrant inspection (FPI) and eddy current inspection (ECI) of the propeller hub for cracks. This AD results from reports of 10 hubs found cracked during propeller overhaul. We are issuing this AD to prevent failure of the propeller hub, which could cause blade separation, damage to the airplane, and loss of control of the airplane.
Airworthiness Directives; Airbus Model A330-200 and -300, and Model A340-200, -300, -500 and -600 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747SR, and 747SP Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747SR, and 747SP series airplanes. This AD requires repetitive detailed inspections of certain overwing intercostal webs, and related investigative and corrective actions if necessary. This AD results from reports of cracks in overwing intercostal webs. We are issuing this AD to detect and correct such cracking, which could grow and result in a severed intercostal. If an intercostal is severed, cracks could develop in the adjacent frame structure and skin, resulting in a rapid loss of cabin pressure.
Airworthiness Directives; Bombardier, Inc. Model DHC-8-400, -401, and -402 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Aircraft Industries a.s. (Type Certificate G60EU Previously Held by LETECKÉ ZÁVODY a.s. and LET Aeronautical Works) Model L-13 Blanik Gliders
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; The Boeing Company Model 777 Airplanes
We are adopting a new airworthiness directive (AD) for certain Model 777 airplanes. This AD requires inspecting the bolt, nut, and downstop of the slat track assembly to determine if the bolt, nut, or stops are missing and to determine if the thread protrusion of the bolt from the nut is within specified limits and parts are correctly installed, and related investigative and corrective actions if necessary. For certain airplanes, this AD also requires inspecting the slat cans at the outboard slat number 3 and 12 outboard main track locations for holes and wear damage, and corrective actions if necessary; and replacing the downstop hardware for the outboard slats number 3 and 12 outboard and inboard main track locations. This AD results from a report of a hole in the inboard main track slat can for outboard slat number 12 on a Model 777 airplane. The hole was caused when the bolt securing the downstop migrated out of the fitting and contacted the slat can. We are issuing this AD to detect and correct damage to the outboard slat main track slat cans, which can allow fuel leakage into the fixed wing leading edge in excess of the capacity of the draining system. Excess fuel leakage could result in an uncontained fire.
Airworthiness Directives; Airbus Model A330-200 and -300 Airplanes and Model A340-200, -300, -500, and -600 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier, Inc. Model DHC-8-400 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
