Federal Aviation Administration June 23, 2010 – Federal Register Recent Federal Regulation Documents

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) to supersede AD 2006-08-09, which applies to all Air Tractor, Inc. (Air Tractor) Models AT-802 and AT-802A airplanes. AD 2006-08-09 currently requires you to repetitively inspect (using the eddy current method) the two outboard fastener holes in both of the wing main spar lower caps at the center splice joint for cracks and repair or replace any cracked spar cap. Since we issued AD 2006-08-09, we have determined we need to clarify the serial numbers (SNs) of the Models AT-802 and AT- 802A airplanes affected by that AD. Additionally, we are adding an option of modifying the wing main spar lower caps to extend the safe life limit on the affected airplanes. Consequently, this AD would keep the actions of AD 2006-08-09, clarify the affected SNs, and add a modification option to extend the safe life limit. We are issuing this AD to detect and correct cracks in the wing main spar lower cap at the center splice joint, which could result in failure of the spar cap and lead to wing separation and loss of control of the airplane.

This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We are adopting a new airworthiness directive (AD) for certain Model 777-200LR and -300ER series airplanes. This AD requires doing a high frequency eddy current inspection for cracking of the keyway of the fuel tank access door cutout on the left and right wings between wing rib numbers 8 (wing station 387) and 9 (wing station 414.5), and related investigative and corrective actions if necessary. This AD results from reports of cracks emanating from the keyway of the fuel tank access door cutout of the lower wing skin between wing rib numbers 8 and 9. We are issuing this AD to prevent loss of the lower wing skin load path, which could cause catastrophic structural failure of the wing.