Federal Aviation Administration April 29, 2009 – Federal Register Recent Federal Regulation Documents
Results 1 - 3 of 3
Airworthiness Directives; Construcciones Aeronauticas, S.A. (CASA), Model CN-235, CN-235-100, CN-235-200, and CN-235-300 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: During operation in icing conditions, an asymmetric configuration of the de-icing boots was detected, occurring during the inflation and deflation check of the de-icing system. This was found to be due to an unexpected failure mode in the pneumatic and de-icing system's control electronic logic. This condition, if not corrected, could affect the de-icing capabilities of the boots installed on the wing and horizontal stabilizers, potentially leading to loss of control of the aircraft. The proposed AD would require actions that are
Airworthiness Directives; Airbus Model A330-200 and -300 Series Airplanes and A340-200 and -300 Series Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: An A340 operator has reported an uncommanded engine N[deg]4 shut down during taxi after landing. The root cause of this event has been identified as failure of the fuel pump Non Return Valve (NRV) preventing the collector cell jet pump from working. This led to engine N[deg]4 collector cell fuel level to drop below the pump inlet and consequently causing engine N[deg]4 flame out. Multiple NRV failures in combination with failure modes trapping fuel could potentially increase the quantity of unusable fuel on aircraft possibly leading to fuel starvation which could result in engine in-flight shut down and would constitute an unsafe condition. The proposed AD would
Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: An A320 operator experienced difficulties in extending the RAT [ram air turbine] during a deployment testing. During the trouble shooting, the Ejection Jack of the RAT was removed and investigated. The investigation identified excessive wear of the uplock segments against the inner cylinder of the Ejection Jack, due to an incorrect blend radius of the inner cylinder. This Ejection Jack failure may prevent the effective deployment and use of the RAT in emergency conditions. The proposed AD would require actions that are
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
