Federal Aviation Administration October 29, 2008 – Federal Register Recent Federal Regulation Documents
Results 1 - 5 of 5
Airworthiness Directives; Boeing Model 727 Airplanes
We propose to adopt a new airworthiness directive (AD) for all Boeing Model 727 airplanes. This proposed AD would require inspections for cracking of the left- and right-side shear ties and web posts of the kickload beam and the adjacent structure in the vertical stabilizer, and corrective actions if necessary. This proposed AD results from a report of cracking of the left- and right-side web posts and shear ties of the kickload beam. We are proposing this AD to detect and correct cracking of the left- and right-side web posts and shear ties of the kickload beam, which, when coupled with failures in the adjacent structure, could result in structural failure of the vertical stabilizer, and loss of control of the airplane.
Executive Committee of the Aviation Rulemaking Advisory Committee; Meeting
The FAA is issuing this notice to advise the public of a meeting of the Executive Committee of the Aviation Rulemaking Advisory Committee.
Airworthiness Directives; Aircraft Industries a.s. (Type Certificate G60EU Previously Held by LETECKÉ ZÁVODY a.s. and LET Aeronautical Works) Model L 23 Super Blanik Sailplane
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model CL-600-2C10 (Regional Jet Series 700 & 701) Series Airplanes and Model CL-600-2D24 (Regional Jet Series 900) Series Airplanes
The FAA is revising an existing airworthiness directive (AD) that applies to certain Bombardier Model CL-600-2C10 (Regional Jet series 700 & 701) series airplanes and Model CL-600-2D24 (Regional Jet series 900) series airplanes. That AD currently requires revising the Airworthiness Limitations section of the Instructions of Continued Airworthiness by incorporating new repetitive inspections and an optional terminating action for the repetitive inspections, and repairing any crack. This new AD clarifies the applicability of the existing AD. This AD results from reports of hydraulic pressure loss in either the number 1 or number 2 hydraulic system due to breakage or leakage of hydraulic lines in the aft equipment bay and reports of cracks on the aft pressure bulkhead web around the feed-through holes. We are issuing this AD to prevent loss of hydraulic pressure, which could result in reduced controllability of the airplane, and to detect and correct cracks on the aft pressure bulkhead web, which could result in reduced structural integrity of the aft pressure bulkhead.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
