Federal Aviation Administration November 16, 2006 – Federal Register Recent Federal Regulation Documents
Results 1 - 4 of 4
Airworthiness Directives; Turbomeca Turmo IV A and IV C Series Turboshaft Engines
The FAA is superseding an existing airworthiness directive (AD) for Turbomeca Turmo IV A and IV C series turboshaft engines. That AD currently requires borescope and eddy current inspections or ultrasonic inspections of centrifugal compressor intake wheel blades for cracks and evidence of corrosion pitting, and replacement with serviceable parts. This AD requires the same actions, but would require borescope inspections at more frequent intervals for certain engines. This AD results from Turbomeca's review of the engines' service experience that determined more frequent borescope inspections are required on engines not modified to the TU 191, TU 197, or TU 224 standard. We are issuing this AD to prevent centrifugal compressor intake wheel blade cracks, which can result in engine in-flight power loss, engine shutdown, or forced landing.
Airworthiness Directives; Boeing Model 757 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 757 airplanes. This AD requires installing a control wheel damper assembly at the first officer's drum bracket assembly and aileron quadrant beneath the flight deck floor in section 41; doing a functional test and adjustment of the new installation; and doing related investigative/corrective actions if necessary. For certain airplanes, this AD also requires doing an additional adjustment test of the re-located control wheel position sensor, and an operational test of the flight data recorder and the digital flight data acquisition unit. This AD also requires installing vortex generators (vortilons) on the leading edge of the outboard main flap on certain airplanes. This AD results from several reports that flightcrews experienced unintended roll oscillations during final approach, just before landing. We are issuing this AD to prevent unintended roll oscillations near touchdown, which could result in loss of directional control of the airplane, and consequent airplane damage and/or injury to flightcrew and passengers.
Airworthiness Directives; Air Tractor, Inc. Models AT-502, AT-502A, AT-502B, AT-602, AT-802, and AT-802A Airplanes
The FAA adopts a new airworthiness directive (AD) for certain Air Tractor, Inc. (Air Tractor) Models AT-502, AT-502A, AT-502B, AT- 602, AT-802, and AT-802A airplanes. This AD requires you to repetitively visually inspect the rudder and vertical fin hinge attaching structure (vertical fin skins, spars, hinges, and brackets) for loose fasteners, cracks, and/or corrosion. This AD also requires you to replace any damaged parts found as a result of the inspection and install an external doubler at the upper rudder hinge. This AD results from two reports of in-flight rudder separation from the vertical fin at the upper attach hinge area, and other reports of airplanes with loose hinges, skin cracks, or signs of repairs to the affected area. We are issuing this AD to detect and correct loose fasteners; any cracks in the rudder or vertical fin skins, spars, hinges or brackets; and/or corrosion of the rudder and vertical fin hinge attaching structure. Hinge failure adversely affects ability to control yaw and has led to the rudder folding over in flight. This condition could allow the rudder to contact the elevator and affect ability to control pitch with consequent loss of control.
Airworthiness Directives; BAE Systems (Operations) Limited Model BAe 146 and Avro 146-RJ Airplanes
The FAA is adopting a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model BAe 146 and Avro 146-RJ airplanes. This AD requires modifying the nose landing gear. This AD results from reports of loss of the nose wheel assembly. We are issuing this AD to prevent the nose wheel nut from loosening, and consequently, the nose wheel assembly detaching from the airplane; and to prevent the nose wheel clamping loads from applying to the machined radius at the root of the stub axle, which could result in damage to the nose landing gear.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
