Federal Aviation Administration January 12, 2006 – Federal Register Recent Federal Regulation Documents
Results 1 - 11 of 11
Consensus Standards, Light-Sport Aircraft
This notice announces the availability of one new consensus standard and revisions to certain previously accepted consensus standards relating to the provisions of the Sport Pilot and Light-Sport Aircraft rule issued July 16, 2004, and effective September 1, 2004. ASTM International Committee F37 on Light Sport Aircraft developed the new and revised standards with Federal Aviation Administration (FAA) participation. By this Notice, the FAA finds the new and revised standards acceptable for certification of the specified aircraft under the provisions of the Sport Pilot and Light-Sport Aircraft rule.
Advisory Circular (AC) 23-26, Synthetic Vision and Pathway Depictions on the Primary Flight Display
This advisory circular (AC) sets forth an acceptable means, but not the only means, of showing compliance with Title 14 Code of Federal Regulations (14 CFR) part 23 for two new concepts in small airplanes. The two concepts are: (1) Synthetic Vision (SV), and (2) pathway depictions displaying the navigation course on the primary flight display. This AC addresses the two concepts in a head down display format only. This AC covers airplanes in the normal, utility, acrobatic, and commuter categories approved to fly under Instrument Flight Rules (IFR). Material in this AC is neither mandatory nor regulatory in nature and does not constitute a regulation. The draft advisory circular was issued for Public Comment on May 16, 2005 (70 FR 25873). When possible, comments received were used to modify the draft advisory circular.
Airworthiness Directives; Honeywell International Inc. (Formerly AlliedSignal, Inc., Formerly Textron Lycoming, Formerly Avco Lycoming) T5309, T5311, T5313B, T5317A, T5317A-1, and T5317B Series, and T53-L-9, T53-L-11, T53-L-13B, T53-L-13BA, T53-L-13B S/SA, T53-L-13B S/SB, T53-L-13B/D, and T53-L-703 Series Turboshaft Engines
The FAA is adopting a new airworthiness directive (AD) for certain Honeywell International Inc., (formerly AlliedSignal, Inc., formerly Textron Lycoming, formerly Avco Lycoming) T53 turboshaft engines, installed on, but not limited to, Bell 204, Bell 205, Kaman K- 1200 series, Bell AH-1, and Bell UH-1 helicopters, certified under 14 CFR 21.25 or 14 CFR 21.27. This AD requires implementing reduced life limits for certain parts, using cycle counting methods, and using draw- down schedules to replace components that exceed the new limits. This AD results from the manufacturer informing us of test and analysis showing lower calculated service life limits for certain parts, than previously published. We are issuing this AD to prevent failure of certain compressor, gas producer, and power turbine rotating components, which could result in failure of the engine and possible damage to the helicopter.
Airworthiness Directives; Gulfstream Aerospace LP Model Gulfstream 100 Airplanes; and Model Astra SPX, and 1125 Westwind Astra Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Gulfstream Aerospace LP Model Gulfstream 100 airplanes; and Model Astra SPX, and 1125 Westwind Astra airplanes. This AD requires a one-time inspection for discrepancies of the nose wheel steering assembly of the landing gear, installing a warning placard on each nose landing gear door, and corrective action if necessary. This AD results from reports of failure of the steering brackets of the nose wheel steering assembly, and in one incident, loss of steering control. We are issuing this AD to find and fix these discrepancies, which could result in loss of steering control and consequent reduced controllability of the airplane.
Airworthiness Directives; Frakes Aviation (Gulfstream American) Model G-73 (Mallard) Series Airplanes and Model G-73 Airplanes That Have Been Converted To Have Turbine Engines
This document publishes in the Federal Register an amendment adopting airworthiness directive (AD) 2006-01-51 that was sent previously by individual notices to all known U.S. owners and operators of Frakes Aviation (Gulfstream American) Model G-73 (Mallard) series airplanes and Model G-73 airplanes that have been converted to have turbine engines. This AD requires an inspection to detect repairs, cracking, or corrosion of the wings from wing station (WS) 77L to WS 77R, front spar to rear (main) spar; removal of repairs, if found; removal of sealant from the interior of the wet bays; and repair of any crack or corrosion. This AD results from a report indicating that the right wing of a Frakes Aviation (Gulfstream American) Model G-73 (Mallard) airplane separated from the fuselage on takeoff, which resulted in the airplane impacting the water near Miami Beach, Florida. We are issuing this AD to prevent structural failure of the wing and loss of control of the airplane.
Special Conditions: Chelton Flight Systems, Inc.; Various Airplane Models; Protection of Systems for High Intensity Radiated Fields (HIRF)
The FAA published a document in the Federal Register on August 30, 2002 (Volume 67, Number 169) regarding Special Condition 23-127-SC for Chelton Flight Systems, Various Airplane Models; Protection of Systems for High Intensity Radiated Fields (HIRF). This amendment is being published to add several airplane models to the existing special condition to cover current and future amendments to the Approved Model List (AML) STC. These special conditions address HIRF certification requirements for digital systems not addressed by the current regulations. See the attached AML for the airplanes that are added by this amendment. These airplanes, as modified by Chelton Flight Systems, will have a novel or unusual design feature(s) associated with the installation of an electronic flight instrument system. These special conditions address the protection of these systems from the effects of high intensity radiated field (HIRF) environments. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; The Cessna Aircraft Company Models 208 and 208B Airplanes
The FAA adopts a new airworthiness directive (AD) for all The Cessna Aircraft Company (Cessna) Models 208 and 208B airplanes. This AD requires you to install the pilot assist handle (part number (P/N) SK208-146-2) (or FAA-approved equivalent part number) and deicing boots on the cargo pod and landing gear fairings (part number (P/N) AK208-6C) (or FAA-approved equivalent part number); and make changes to the Pilot's Operating Handbook (POH) and FAA-approved Airplane Flight Manual (AFM). This AD results from reports of several accidents involving the affected airplanes during operations in flight and in ground icing conditions. We are issuing this AD to provide a safe method to detect ice, snow, frost, or slush adhering to the upper wing (a critical surface) prior to takeoff; and to reduce drag in-flight by shedding ice on the cargo pod and landing gear fairings. Ice adhering to the upper wing surface, cargo pod, or landing gear fairings could result in a reduction in airplane performance with the consequences that the airplane cannot perform a safe takeoff or climb.
Airworthiness Directives; BAE Systems (Operations) Limited Model BAe 146-100A and -200A Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model BAe 146-100A and -200A series airplanes. This AD requires inspecting the nose landing gear (NLG) assembly to determine the part number of the NLG main fitting subassembly. For subject NLG main fitting subassemblies, this AD also requires determining the total number of accumulated landings on a subject NLG main fitting subassembly, and eventually replacing the NLG assembly. This AD results from a report indicating that the airplane maintenance manual contains incorrect safe-life limit information for certain NLG assemblies. We are issuing this AD to ensure that affected NLG fitting subassemblies are removed from service before they reach their approved safe-life limit. Operating with an NLG fitting subassembly that is beyond its approved safe-life limit could result in failure of the NLG and consequent loss of directional control on the ground and major structural damage to the airplane.
Airworthiness Directives; Boeing Model 747-100, 747-100B, 747-200B, 747-200C, 747-200F, 747-400F, 747SR, and 747SP Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 747-100, 747-100B, 747-200B, 747-200C, 747-200F, 747-400F, 747SR, and 747SP series airplanes, without a stretched upper deck or stretched upper deck modification. This AD requires detailed and high-frequency eddy current inspections for cracks of each affected tension tie and of the surrounding structure, and related investigative and corrective actions if necessary. This AD results from a report of a crack in the tension tie at the body station 820 frame connection, and cracks found on the Boeing 747SR fatigue-test airplane in both the tension ties and frames at the tension tie to frame connections at body stations 800, 820, and 840. We are issuing this AD to find and fix cracks in the tension ties, which could lead to cracks in the skin and body frame and result in rapid in-flight depressurization of the airplane.
Airworthiness Directives; Airbus Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes); and Airbus Model A310 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus airplanes, listed above. This AD requires installing two-stage relays in the electronics rack (90VU), and performing related corrective and investigative actions. This AD results from reports of inadvertent rudder trim activation when the autopilot is on. We are issuing this AD to prevent inadvertent trim activation when the autopilot is on and the slats are extended, which could result in rudder activation when the autopilot is turned off.
Airworthiness Directives; BAE Systems (Operations) Limited Model Avro 146-RJ Airplanes
The FAA is adopting a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model Avro 146-RJ airplanes. This AD requires reviewing the airplane's maintenance records to determine if certain tasks of the BAE Systems (Operations) Limited BAe146/Avro RJ Maintenance Planning Document issued May 15, 2004, have been accomplished. This AD also requires doing repetitive detailed inspections of the external fuselage skin adjacent to the longeron at rib 0 from frame 29 to frame 31, and repairing any damage. This AD results from issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority. We are issuing this AD to detect and correct cracking of the fuselage skin, which could result in structural failure of the fuselage.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
