Federal Aviation Administration July 11, 2005 – Federal Register Recent Federal Regulation Documents
Results 1 - 6 of 6
Airworthiness Directives; Rockwell International (Aircraft Specification No. A-2-575 Previously Held by North American and Recently Purchased by Boeing) Models AT-6 (SNJ-2), AT-6A (SNJ-3), AT-6B, AT-6C (SNJ-4), AT-6D (SNJ-5), AT-6F (SNJ-6), BC-1A, SNJ-7, and T-6G Airplanes; and Autair Ltd. (Aircraft Specification No. AR-11 Previously Held by Noorduyn Aviation Ltd.) Model Harvard (Army AT-16) Airplanes
This document makes a correction to Airworthiness Directive (AD) 2005-12-51, which was published in the Federal Register on June 21, 2005 (70 FR 35519), and applies to Rockwell International (Aircraft Specification No. A-2-575 previously held by North American and recently purchased by Boeing) Models AT-6 (SNJ-2), AT-6A (SNJ-3), AT- 6B, AT-6C (SNJ-4), AT-6D (SNJ-5), AT-6F (SNJ-6), BC-1A, SNJ-7, and T-6G airplanes; and Autair Ltd. (Aircraft Specification No. AR-11 previously held by Noorduyn Aviation Ltd.) Model Harvard (Army AT-16) airplanes. We incorrectly referenced the docket number as FAA-2005-24163 throughout the document. The correct docket number is FAA-2005-21463. This action corrects the regulatory text.
Standard Instrument Approach Procedures, Weather Takeoff Minimums; Miscellaneous Amendments
This amendment establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and/or Weather Takeoff Minimums for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, addition of new obstacles, or changes in air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Boeing Model 727, 727C, 727-100, 727-100C, 727-200, and 727-200F Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 727, 727C, 727-100, 727-100C, 727-200, and 727- 200F series airplanes. This AD requires repetitive inspections of the carriage attach fittings on the foreflaps of each wing for cracking and other discrepancies, and corrective actions if necessary. For certain airplanes, this AD also concurrently requires various other actions related to the subject area. This AD also provides for an optional terminating action for the repetitive inspection requirements and for an optional replacement that defers the repetitive inspections. This AD is prompted by reports of damaged or failed outboard foreflaps with a cracked or failed carriage attach fitting of the foreflap sequencing carriage. We are issuing this AD to detect and correct fatigue cracking of the attach fittings of the foreflap carriage of the wings, which could result in partial or complete loss of the foreflap and consequent loss of controllability of the airplane.
Airworthiness Directives; Boeing Model 747 Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Boeing Model 747-100, -200, -300, and 747SP series airplanes. That AD currently requires certain inspections to find missing or alloy-steel taperlock fasteners (bolts) in the diagonal brace underwing fittings, and corrective actions if necessary. For airplanes with missing or alloy-steel fasteners, that AD also mandates replacement of certain fasteners with new fasteners, which constitutes terminating action for certain inspections. This new AD expands the applicability to include additional airplane models and requires a new inspection to determine fastener material and to find missing or broken fasteners, and related investigative/corrective actions if necessary. This AD is prompted by reports indicating that cracked fasteners made of A286 material were found on airplanes that had only fasteners made of A286 material installed in the area common to the diagonal brace underwing fittings. We are issuing this AD to prevent loss of the underwing fitting load path due to missing or damaged alloy-steel or A286 taperlock fasteners, which could result in separation of the engine and strut from the airplane.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135 and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135 and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP airplanes. This AD requires inspecting to determine the part number of the left and right engine fire handles; and replacing the engine fire handles with engine fire handles having different part numbers if necessary. This AD is prompted by cases of the internal circuit of the engine fire handle failing. We are issuing this AD to prevent failure of the internal circuit of the engine fire handle that could disable the fuel shut-off valves and the discharge of the fire extinguishing agent, which, in the event of a fire, could result in the inability to extinguish a fire.
Airworthiness Directives; Boeing Model 777-200 and -300 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 777-200 and -300 series airplanes. This AD requires replacing the existing halogen lamps in the cargo compartment light assemblies with new incandescent lamps, and installing warning and identification placards. This AD is prompted by a report of an aft cargo fire during flight. We are issuing this AD to prevent a fire in the cargo compartment.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
