Department of Transportation February 14, 2025 – Federal Register Recent Federal Regulation Documents
Results 1 - 12 of 12
TBL Group, Inc.-Acquisition of Control-Reston Limousine & Travel Service, Inc.
TBL Group, Inc. (TBL Group), a holding company that owns multiple interstate motor passenger carriers, has filed an application for Board approval of its acquisition of an additional federally regulated motor passenger carrier, Reston Limousine & Travel Service, Inc. (Reston). The Board is tentatively approving and authorizing the transaction. If no opposing comments are timely filed, this notice will be the final Board action.
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by reported events of annunciated horizontal stabilizer trim actuator (HSTA) jams occurring at the end of the cruise phase of flight. This AD requires lubricating the HSTA using an improved method, at a reduced interval, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-22- 03, AD 2023-13-10, and AD 2024-04-03, which applied to certain Airbus SAS Model A318, A319, A320, and A321 series airplanes. AD 2017-22-03, AD 2023-13-10, and AD 2024-04-03 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD continues to require certain actions in AD 2023-13-10 and all actions in AD 2024-04- 03, and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2016-20- 12, AD 2018-17-21, and AD 2019-14-04, which applied to certain Airbus SAS Model A318, A319, A320, and A321 series airplanes. AD 2019-14-04 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations and terminated the provisions of AD 2018-17-21, which, in turn, terminated the provisions of AD 2016-20-12. This AD was prompted by the determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-400, 747-400F, 747-8F, and 747-8 series airplanes. This AD was prompted by a report that, during potable water servicing, there were multiple engine indicating and crew alerting system messages. The cause was the separation of a fitting and steel water supply tube above an electronics equipment cooling air filter, behind the forward cargo compartment left sidewall. This AD requires, depending on configuration, installing at certain locations: conduits on exposed potable water supply lines, envelope assemblies over all exposed potable water line fittings and exposed potable water supply lines, a slitted spray shield, a two-piece deflector shield around the equipment cooling system (ECS) air inlet, and/or a shroud on exposed potable water supply lines. The FAA is issuing this AD to address the unsafe condition on these products.
Membership in the National Parks Overflights Advisory Group
The Federal Aviation Administration (FAA) and the National Park Service (NPS) invite interested persons to apply to fill two upcoming vacancies on the National Parks Overflights Advisory Group (NPOAG). This notice invites interested persons to apply for the openings. The upcoming openings are for a representative of Native American tribes and a representative of Air Tour Operators.
Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Costruzioni Aeronautiche Tecnam S.P.A. (Tecnam) Model P2010 and P2010 TDI airplanes. This AD was prompted by the disconnection of a rudder pedals torque tube from one of its hinges. This AD requires modifying the airplane by installing larger diameter retainer washers on both the left-hand (LH) and right-hand (RH) rudder pedals torque tube hinges, installing new self-locking nuts, doing a functional or operating test of the system to ensure the retaining washers are installed properly, and applying a torque stripe on the LH and RH nuts and bolts threads. The FAA is issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities; Notice and Request for Comment; Reporting of Information and Documents About Potential Defects
In compliance with the Paperwork Reduction Act of 1995 (PRA), this notice announces that the Information Collection Request (ICR) summarized below will be submitted to the Office of Management and Budget (OMB) for review and approval. The ICR describes the nature of the information collection and its expected burden. This is an extension without change of a currently approved information collection on the reporting of information and documents about potential defects, "Reporting of Information And Communications About Potential Defects".
Anthropomorphic Test Devices, HIII 5th Percentile Female Test Dummy; Incorporation by Reference
This document delays until March 20, 2025, the effective date of the January 3, 2025, final rule that revised the chest jacket and spine box specifications for the Hybrid III 5th Percentile Female Test Dummy (HIII-5F) to address issues with fit and availability of the jacket and a noise artifact from the spine box.
Federal Motor Vehicle Safety Standards; Occupant Crash Protection, Seat Belt Reminder Systems, Controls and Displays
This document delays until March 20, 2025, the effective date of the January 3, 2025, final rule that amended Federal Motor Vehicle Safety Standard (FMVSS) No. 208, "Occupant crash protection," to require a seat belt use warning system for rear seats and enhance the seat belt warning requirements for the front outboard seats.
Federal Motor Vehicle Safety Standards; Child Restraint Systems, Child Restraint Anchorage Systems; Incorporation by Reference
This document delays until March 20, 2025, the effective date of the January 7, 2025, final rule that amends Federal Motor Vehicle Safety Standard (FMVSS) No. 225; Child restraint systems, and FMVSS No. 213b; Child restraint systems.
Federal Motor Vehicle Safety Standards; FMVSS No. 305a Electric-Powered Vehicles: Electric Powertrain Integrity Global Technical Regulation No. 20; Incorporation by Reference
This document delays until March 20, 2025, the effective date of the December 20, 2024, final rule that adopted Federal Motor Vehicle Safety Standard (FMVSS) No. 305a to replace FMVSS No. 305, "Electric- powered vehicles: Electrolyte spillage and electrical shock protection." FMVSS No. 305a applies to light and heavy vehicles and includes performance requirements for the propulsion battery. The final rule also established a part entitled, "Documentation for Electric- powered Vehicles," that requires manufacturers to compile risk mitigation documentation and submit standardized emergency response information to assist first and second responders handling electric vehicles.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.