Department of Transportation December 2, 2024 – Federal Register Recent Federal Regulation Documents
Results 1 - 14 of 14
Daimler Truck North America, LLC; Receipt of Petition for Decision of Inconsequential Noncompliance
Daimler Truck North America, LLC (DTNA) has determined that a model year (MY) 2022 Western Star 4900 truck tractor does not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 136, Electronic Stability Control Systems for Heavy Vehicles. DTNA filed a noncompliance report dated February 28, 2024, and subsequently petitioned NHTSA (the "Agency") on March 22, 2024, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This document announces receipt of DTNA's petition.
FCA US LLC; Receipt of Petition for Decision of Inconsequential Noncompliance
FCA US LLC f/k/a Chrysler Group LLC (collectively referred to as "FCA US") has determined that certain model year (MY) 2018-2022 Alfa Romeo Stelvio motor vehicles do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 111, Rear Visibility. FCA US filed a noncompliance report dated September 21, 2021. FCA US subsequently petitioned NHTSA on October 14, 2021, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This notice announces receipt of FCA US' petition and amended petition.
Agency Information Collection Activities: Request for Comments for a New Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for a new information collection, which is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2024-06-06, which applies to all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent7000-72 and Trent7000-72C engines. AD 2024-06-06 requires revising the airworthiness limitations section (ALS) of the operator's existing approved engine maintenance or inspection program, as applicable, to incorporate new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts. Since the FAA issued AD 2024-06-06, the manufacturer has revised the engine time limits manual (TLM) to introduce new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts, which prompted this AD. This proposed AD would require revising the ALS of the existing approved engine maintenance or inspection program, as applicable, to incorporate new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Amendment of Class E Airspace; Austin, TX; Establishment of Class E Airspace; Austin, Lago Vista, and Lakeway, TX
This action proposes to amend the Class E airspace at Austin, TX, and establish Class E airspace at Austin, Lago Vista, and Lakeway, TX. The FAA is proposing this action as the result of biennial airspace reviews. This action will bring the airspace into compliance with FAA orders and support instrument flight rule (IFR) procedures and operations.
Commercial Driver's License: National School Transportation Association Application for Renewal of Exemption
FMCSA announces its final decision to renew the exemption granted to the National School Transportation Association (NSTA) for a period of two years to permit all commercial driver's license (CDL) applicants seeking a school bus endorsement to forgo the engine compartment portion of the pre-trip vehicle inspection skills testing requirement, known informally as the "under-the-hood" testing requirement. Drivers issued CDLs pursuant to the requested exemption are restricted to intrastate operation of school buses only.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA is superseding Airworthiness Directive (AD) 2023-21-08 for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000 engines. AD 2023-21-08 required revisions to the airworthiness limitation section (ALS) of the operator's existing approved aircraft maintenance program (AMP). This AD was prompted by the manufacturer's revision of the time limits manual (TLM) to introduce new or more restrictive tasks, limitations, and associated thresholds and intervals for life-limited parts. This AD requires revisions to the ALS of the operator's existing approved AMP, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG
The FAA is superseding Airworthiness Directive (AD) 2023-24- 06, which applies to certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000 engines. AD 2023-24-06 required revising the airworthiness limitation section (ALS) of the operator's existing approved engine maintenance or inspection program, as applicable, to incorporate new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts. This AD was prompted by the manufacturer revising the time limits manual (TLM) to introduce new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts. This AD requires revisions to the ALS of the operator's existing approved engine maintenance or inspection program, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of missing or damaged inboard flap seal plate assemblies. This AD requires repetitive inspections for cracks of the attaching angles of the inboard flap seal plates and replacement. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-8, 737-9, and 737-8200 (737 MAX) airplanes. This AD was prompted by a report of a non-conforming installation of spoiler wire bundles that led to unintended spoiler motion, including one instance of a flight spoiler hardover. Further investigation identified the potential for a hardover of more than one flight spoiler on the same wing, which can exceed full lateral control capability leading to loss of control of the airplane. This AD requires a one-time inspection of the clearance between the spoiler control wire bundles and the adjacent structure, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Modification of Class E Airspace; Chenega Bay Airport, Chenega, AK
This action modifies the Class E airspace extending upward from 700 feet above the surface of the earth due to the Area Navigation (RNAV) (Global Positioning System [GPS])-A approach being re-oriented to the north at Chenega Bay Airport, Chenega, AK. Additionally, this action updates the administrative portion of the airport's Class E airspace legal description. These modifications support the safety and management of instrument flight rules (IFR) operations at the airport.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-300 and -400 series airplanes. This AD was prompted by a report that flight control rigging tolerances could result in spoiler deflection not reaching the minimal level required to engage the cruise thrust split monitor (MONFD) used by the autothrottle (A/T) system. This AD requires changing certain wire bundles, installing a new housing assembly, removing the mechanical aileron force limiter (MAFL), doing an inspection or records check to determine if certain flight control computers (FCCs) are installed, and performing applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP)) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by reports that the pylon-to-wing area motive flow flexible fuel line assemblies may have been installed incorrectly. This AD requires inspecting the motive flow fuel line assemblies and performing corrective actions as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Notice of Final Federal Agency Actions on Transportation Project in Washington State
This notice announces actions taken by the FHWA that are final. The action relates to the SR 3 Freight CorridorNew Alignment project, located in western Washington within the City of Bremerton, Kitsap County, and Mason County. The Project will construct the SR 3 Freight CorridorNew Alignment to the east of the existing SR3 with a design and posted speed of 50 miles per hour. The proposed alignment will begin at MP 22.81 on existing SR 3 and connect back to the existing SR 3 alignment at MP 29.49. The project includes stormwater treatment facilities, 12-foot lanes with 8-foot shoulders, and roundabouts at the north and south connections to existing SR 3. The FHWA's Finding of No Significant Impact (FONSI) provides details on the Selected Alternative for the proposed improvements.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.