Department of Transportation October 4, 2024 – Federal Register Recent Federal Regulation Documents
Results 1 - 10 of 10
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 717-200 airplanes and Model DC-9-10, DC-9-20, DC-9-30, DC-9-40, and DC-9-50 series airplanes. This AD was prompted by a report of cracked and severed structure found in the aft fuselage cant bulkhead at a certain station (STA) and the vertical stabilizer rear spar installation. This AD requires a one-time inspection of the aft fuselage cant bulkhead at certain STAs and vertical stabilizer rear spar structure, and corrective actions and an inspection report if necessary. This AD also requires an inspection of that same structure if certain conditions occur during any phase of flight. The FAA is issuing this AD to address the unsafe condition on these products.
Michelin North America, LLC, Grant of Petition for Decision of Inconsequential Noncompliance
Michelin North America, LLC (MNA), has determined that certain Michelin Pilot Sport All Season 4 replacement passenger car tires do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 139, New Pneumatic Radial Tires for Light Vehicles. MNA filed a noncompliance report dated September 14, 2021. MNA subsequently petitioned NHTSA on September 30, 2021, and later supplemented the petition on September 30, 2022, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This document announces the grant of MNA's petition.
Comoto Holdings, Inc., Receipt of Petition for Decision of Inconsequential Noncompliance
Comoto Holdings, Inc., (Comoto), has determined that certain Street & Steel Oakland motorcycle helmets do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 218, Motorcycle Helmets. On July 6, 2022, Comoto filed a noncompliance report and submitted a petition, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This document announces receipt of Comoto's petition.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: National Airspace System Data Release Request
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on March 8, 2024. The collection is a request form, and collection frequency is on occasion, depending on how often requests for National Airspace System (NAS) data are submitted to the FAA. The information to be collected will be used to evaluate the validity of a user's request for NAS data from FAA systems and equipment.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is revising an earlier notice of proposed rulemaking (NPRM) to supersede Airworthiness Directive (AD) 2012-07-06. AD 2012- 07-06 applies to certain The Boeing Company Model 777-200, -200LR, - 300, -300ER, and 777F series airplanes. This action revises the NPRM by proposing to require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products. Since these actions would impose an additional burden over those in the NPRM, the FAA is requesting comments on this SNPRM.
Airworthiness Directives; Bell Textron Inc. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Bell Textron Inc. (Bell) Model 204B, 205A, 205A-1, 205B, and 210 helicopters. This AD was prompted by an accident and incidents involving failure of the tail boom attachment structure. This AD requires inspecting the tail boom assembly hardware, replacing tail boom attachment hardware, greasing the bolt shanks, and inspecting torque. This AD also prohibits installing steel alloy nuts on any helicopter. The FAA is issuing this AD to address the unsafe condition on these products.
Establishment of Class E Airspace; Matinicus Island, ME
This action establishes Class E airspace extending upward from 700 feet above the surface for Matinicus Island Airport, Matinicus Island, ME, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures serving this airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Airworthiness Directives; Bell Textron Inc. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Inc. Model 212, 412, 412CF, and 412EP helicopters. This AD was prompted by reports of cracked tail boom attachment barrel nuts (barrel nuts). This AD requires replacing all steel alloy barrel nuts with nickel alloy barrel nuts, replacing or inspecting other tail boom attachment point hardware, repetitively inspecting torque, and repetitively replacing tail boom attachment bolts (bolts). This AD also prohibits installing steel alloy barrel nuts. The FAA is issuing this AD to address the unsafe condition on these products.
Proposed Agency Information Collection Activities; Comment Request
Under the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, FRA seeks approval of the Information Collection Request (ICR) summarized below. Before submitting this ICR to the Office of Management and Budget (OMB) for approval, FRA is soliciting public comment on specific aspects of the activities identified in the ICR.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
