Department of Transportation March 7, 2022 – Federal Register Recent Federal Regulation Documents

The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) CF34-10E model turbofan engines. This AD was prompted by a manufacturer investigation that revealed Teflon material in the A-sump oil strainer (strainer assembly) screen after several reports of in-flight shutdowns (IFSDs) and unscheduled engine removals (UERs). This AD requires initial and repetitive visual inspections of the strainer assembly screen. As a terminating action to the initial and repetitive visual inspections, this AD requires the replacement of the stationary oil seal at the No. 1 forward bearing. The FAA is issuing this AD to address the unsafe condition on these products.

This document denies the September 27, 2021 petitions for rulemaking submitted by the Small Business in Transportation Coalition (SBTC) (``petitioner''). The petitioner requested that the agency initiate rulemaking to establish a new Federal motor vehicle safety standard (FMVSS) on the installation of electronic logging devices (ELDs), and to amend existing FMVSSs for heavy vehicle braking and accelerator control systems (i.e., FMVSS Nos. 105, 121, and 124). NHTSA is denying the petitions based on a lack of information necessary under the National Traffic and Motor Vehicle Safety Act and the allocation of agency resources.

The U.S. Department of Transportation (US DOT) BTS published a 60-day comment period Notice 86 FR 58391 on October 21, 2021 seeking public input to continue the collection of barrier failure data. Barrier Failure Reporting in Oil and Gas Operations on the Outer Continental Shelf is a component of BTS's SafeOCS data sharing framework, that provides a trusted, proactive means for the oil and gas industry to report sensitive and proprietary safety information, and to identify early warnings of safety problems and potential issues by uncovering hidden, at-risk conditions not previously exposed through analysis of reportable equipment failures and incidents. BTS received no comments during the 60-day public comment period.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.

The Great Lakes St. Lawrence Seaway Development Corporation (GLS) and the St. Lawrence Seaway Management Corporation (SLSMC) of Canada, under international agreement, jointly publish and presently administer the St. Lawrence Seaway Regulations and Rules (Practices and Procedures in Canada) in their respective jurisdictions. Under agreement with the SLSMC, the GLS is amending the joint regulations by updating the Regulations and Rules in various categories. The changes update the following sections of the Regulations and Rules: Condition of Vessels; Seaway Navigation; and, Dangerous Cargo. These changes are to clarify existing requirements in the regulations.

The FAA is superseding Airworthiness Directive (AD) 2020-16- 01, which applied to all Airbus SAS Model A318, A319, A320, and A321 series airplanes. AD 2020-16-01 required repetitive cleaning and greasing of affected cargo door seals (both original equipment manufacturer (OEM) and parts manufacturer approval (PMA) parts). This AD was prompted by reports of low halon concentration in the forward and aft cargo compartments due to air leakage through cargo compartment door seals, and the FAA's determination that improved cargo door seals must be installed and that certain flight operations must be limited until the improved cargo door seals are installed. This AD retains certain actions required by AD 2020-16-01 and requires replacing certain forward and aft cargo compartment door seals with new seals and installing a placard on the cargo compartment doors; and for certain airplanes, revising the existing airplane flight manual (AFM) to implement an operational limitation for certain routes. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all Schempp-Hirth Flugzeugbau GmbH Model Ventus-2a and Ventus-2b gliders. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as severe corrosion on the inboard flaperon actuation push rods and ball bearing connecting the flaperon push rod to the bell crank inside the wing. This AD requires inspecting the affected parts of the flaperon control in the wings and taking corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.