Department of Transportation December 16, 2019 – Federal Register Recent Federal Regulation Documents
Results 1 - 20 of 20
Notice of Final Federal Agency Actions on Proposed Highway in California
The FHWA, on behalf of Caltrans, is issuing this notice to announce actions taken by Caltrans, that are final. The actions relate to a proposed highway project, on State Route 12 between postmiles 20.57 and 26.41 near the town of Rio Vista in the County of Solano, State of California. Those actions grant licenses, permits, and approvals for the project.
Environmental Impact Statement (EIS): Erie County
The FHWA is issuing this rescinded notice to advise the public that FHWA will not be preparing and issuing an Environmental Impact Statement (EIS) on a proposal to replace the former South Michigan Avenue Bridge in the City of Buffalo, Erie County, New York [New York State Department of Transportation (NYSDOT) Project Identification Number (PIN) 5758.17]. The NOI to prepare an EIS was published in the Federal Register on April 13, 2009.
Request for Comments of a Reinstatement With Changes of a Previously Approved Information Collection: Procedures and Evidence Rules for Air Carrier Authority Applications
In accordance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Request (ICR) abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on October 1, 2019 [Vol. 84, No. 190, Page 52173]. No comments were received.
Request for Comments of a Reinstatement With Change of a Previously Approved in Information Collection: Use and Change of Names for Air Carriers, Foreign Air Carriers, and Commuter Air Carriers
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on October 1, 2019 [Vol. 84, No. 190, Page 52173]. No comments were received.
Request for Comments of a Reinstatement With Change of a Previously Approved Information Collection: Aircraft Accident Liability Insurance
In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Request (ICR) abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on October 2, 2019 [Vol. 84, No. 190, Page 52172]. No comments were received.
Proposed Agency Information Collection Activities; Comment Request
Under the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, this notice announces that FRA is forwarding the Information Collection Requests (ICRs) abstracted below to the Office of Management and Budget (OMB) for review and comment. The ICRs describe the information collections and their expected burden. On October 2, 2019, FRA published a notice providing a 60-day period for public comment on the ICRs.
Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Requirements (ICRs) abstracted below have been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describe the nature of the information collection and their expected burdens.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by significant changes made to the airworthiness limitations (AWLs) related to fuel tank ignition prevention and the nitrogen generation system. This AD requires revising the existing maintenance or inspection program, as applicable, to include new or revised AWLs. The FAA is issuing this AD to address the unsafe condition on these products.
National Association of the Deaf Petition for Rulemaking; Hearing Requirement for Commercial Motor Vehicle Drivers
FMCSA requests public comments on the National Association of the Deaf's (NAD) petition for rulemaking to rescind the requirement for interstate drivers of commercial motor vehicles (CMVs) to be able to hear. NAD also requests that FMCSA amend the requirement that interstate drivers be able to speak, and the rule prohibiting the use of interpreters during the administration of the commercial driver's license (CDL) skills test. NAD believes the origins of the hearing requirement dates to a time of misguided stereotypes about the abilities and inabilities of deaf and hard of hearing individuals and the rules should now be changed.
Airworthiness Directives; International Aero Engines AG Turbofan Engines
The FAA proposes to adopt a new airworthiness directive (AD) for International Aero Engines AG (IAE) V2500-A1, V2522-A5, V2524-A5, V2525-D5, V2527-A5, V2527E-A5, V2527M-A5, V2528-D5, V2530-A5, V2531-E5, and V2533-A5 turbofan engine models with a certain diffuser case assembly installed. This proposed AD was prompted by a report of a manufacturing quality escape that could impact the life of the diffuser case assembly. This proposed AD would require removal of the affected diffuser case assembly from service and replacement with a part eligible for installation. The FAA is proposing this AD to address the unsafe condition on these products.
Proposed Removal of Class E Airspace, and Proposed Amendment of Class D and Class E Airspace; Jacksonville, FL
This action proposes to remove Class E airspace area designated as an extension to a Class D surface area for Cecil Airport (previously Cecil Field), Jacksonville, FL, as the Cecil very high frequency omnidirectional range (VOR) has been decommissioned, and the VOR approach cancelled. This action would also amend Class D and E airspace by updating the following airport names: Jacksonville NAS (Towers Field) (previously Jacksonville NAS); Herlong Recreational Airport (formerly Herlong Airport); and, Jacksonville Executive Airport at Craig (previously Craig Municipal Airport). Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area. Also, this action would update the geographic coordinates of Cecil Airport, Jacksonville NAS (Towers Field), Jacksonville International Airport, Mayport NAS, and Whitehouse NOLF. This action also would make an editorial change replacing Airport/Facility Directory with the term Chart Supplement in the legal descriptions of associated Class D airspace.
Amendment of Class E Airspace; Pittsfield, MA
This action amends Class E airspace extending upward from 700 feet above the surface at Pittsfield Municipal Airport, Pittsfield, MA, to accommodate airspace reconfiguration due to the redesign of the Localizer (LOC)/Distance Measuring Equipment (DME) Runway (RWY) 26 approach. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport. This action also updates the geographic coordinates of this airport.
Proposed Amendment of Class D and Class E Airspace, Nashua, NH
This action proposes to amend Class D airspace, Class E airspace designated as an extension to a Class D surface area, and Class E airspace extending upward from 700 feet above the surface at Boire Field, Nashua, NH, to accommodate airspace reconfiguration due to the decommissioning of CHERN non-directional beacon, and cancellation of the associated approaches. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport. This action also would update the geographic coordinates of this airport, as well as Manchester Very High Frequency Omnidirectional Range Tactical Air Navigation (VORTAC). In addition, this action would recognize the name change of Pepperell Airport, MA, (formerly Sports Center Airport). This action also would replace the outdated term Airport/Facility Directory with the term Chart Supplement in the legal descriptions of associated Class D and E airspace of Boire Field.
Proposed Amendment of Class E Airspace; Pratt, KS
This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Pratt Regional Airport, Pratt, KS. The FAA is proposing this action as the result of an airspace review caused by the decommissioning of the Pratt non- directional beacon (NDB), which provided navigation information for the instrument procedures at this airport. Additionally, the geographic coordinates of the Pratt Regional Airport, would also be updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Gulfstream Aerospace Corporation (Gulfstream) Model GVI airplanes. This proposed AD was prompted by a report that the primary flight control actuation system (PFCAS) linear variable displacement transducer (LVDT) mechanical disconnect monitor may not trigger the disconnect of the affected control surfaces as required in the event of a control surface failure. This proposed AD would require updating the software of each PFCAS remote electronics unit (REU), which includes an improvement to the LVDT. The FAA is proposing this AD to address the unsafe condition on these products.
Proposed Amendment of Class E Airspace; Gunnison, CO
This action proposes to amend the Class E airspace designated as a surface area, at Gunnison-Crested Butte Regional Airport, Gunnison, CO. The proposal would increase the circular radius of the Class E surface area and add an extension to the west of the airport. Also, this action proposes to amend the Class E airspace by adding an airspace area designated as an extension to a Class D or Class E surface area, to the southwest of the airport. Additionally, this action proposes to amend the Class E airspace extending upward from 700 feet above the surface by significantly reducing the area around the airport, except to the west and southwest of the airport. Furthermore, this action proposes to amend the Class E airspace extending upward from 1,200 feet above the surface by removing this area. This area is wholly contained within the Denver Class E6 en route airspace area and duplication is not necessary. Lastly, this action proposes several administrative changes to the airspace legal descriptions for the airport. These changes are necessary to accommodate airspace redesign for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A319-115 airplanes; Model A320-214, -216, -232, -251N, and -271N airplanes; and Model A321-211, -231, -251N, - 251NX, -253N, -271N, -271NX, and -272N airplanes. This proposed AD was prompted by reports of incomplete installations of the over wing panel lug attachments in the production assembly line. This proposed AD would require a one-time detailed inspection of certain attaching points on the left-hand and right-hand wings for the correct installation of certain hardware, and, depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A319-131, -132, and -133 airplanes, Model A320-231, -232, and -233 airplanes, and Model A321-131, -231, and -232 airplanes. This proposed AD was prompted by a report of rupture of a hydraulic reservoir air pressurization hose on an in-service airplane, leading to air leakage that was undetectable during normal operation, and found during subsequent zonal inspection. This proposed AD would require modifying the airplane by replacing the affected bleed air hoses with a modification of hydraulic pressurization lines, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2017-05-12, which applies to certain Airbus SAS Model A318-112 airplanes, Model A319-111, -112, -115, -132, and -133 airplanes, Model A320-214, -232, and -233 airplanes, and Model A321-211, -212, -213, - 231, and -232 airplanes. AD 2017-05-12 requires a one-time eddy current conductivity measurement of certain cabin, cargo compartment, and frame structural parts to determine if aluminum alloy with inadequate heat treatment was used, and replacement if necessary. Since AD 2017-05-12 was issued, it was determined that aluminum alloy with inadequate heat treatment had been used for additional structural parts. This proposed AD would retain the requirements of AD 2017-05-12, and for certain airplanes, would require additional work, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This proposed AD was prompted by a report that cracking was discovered in a channel within a structural support member for the rudder quadrant, rudder feel unit assembly, and environmental control system due to fatigue. This proposed AD would require repetitive inspections of the rudder quadrant box assembly for any cracking, and modification of the rudder quadrant box assembly. The FAA is proposing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
