Department of Transportation February 9, 2018 – Federal Register Recent Federal Regulation Documents

Notice of Receipt of Petition for Decision That Nonconforming Model Year 2017 UKANG FT-200 Trailers Are Eligible for Importation
Document Number: 2018-02674
Type: Notice
Date: 2018-02-09
Agency: National Highway Traffic Safety Administration, Department of Transportation
This document announces receipt by NHTSA of a petition for a decision that model year (MY) 2017 UKANG FT-200 trailers that were not originally manufactured to comply with all applicable Federal Motor Vehicle Safety Standards (FMVSS) are eligible for importation into the United States because they have safety features that comply with, or are capable of being altered to comply with, all such standards.
Notice of Receipt of Petition for Decision That Nonconforming Model Year 2006 Penman Lightweight GS Cargo Trailers Are Eligible for Importation
Document Number: 2018-02673
Type: Notice
Date: 2018-02-09
Agency: National Highway Traffic Safety Administration, Department of Transportation
This document announces receipt by NHTSA of a petition for a decision that model year (MY) 2006 Penman Lightweight GS cargo trailers that were not originally manufactured to comply with all applicable Federal Motor Vehicle Safety Standards (FMVSS) are eligible for importation into the United States because they have safety features that comply with, or are capable of being altered to comply with, all such standards.
Notice of Final Federal Agency Actions of Proposed Highway/Interchange Improvement in California; Statute of Limitations on Claims
Document Number: 2018-02610
Type: Notice
Date: 2018-02-09
Agency: Federal Highway Administration, Department of Transportation
The FHWA, on behalf of Caltrans, is issuing this notice to announce actions taken by Caltrans, that are final. The actions relate to the proposed highway project, Niles Canyon Safety Improvements Project on State Route 84 (SR-84) between the City of Fremont and the town of Sunol in southern Alameda County, State of California. Those actions grant licenses, permits, and approvals for the project.
Environmental Impact Statement: I-80/I-215 Parley's Interchange, Salt Lake County, Utah
Document Number: 2018-02609
Type: Notice
Date: 2018-02-09
Agency: Federal Highway Administration, Department of Transportation
FHWA, on behalf of the Utah Department of Transportation (UDOT), is issuing this notice to advise the public that an Environmental Impact Statement (EIS) will be prepared for proposed transportation improvements to the I-80/I-215 Parleys Interchange in Salt Lake County, Utah.
Rescinding the Notice of Intent for an Environmental Impact Statement (EIS): 14th Street Bridge Corridor, Arlington County, Virginia and Washington, DC
Document Number: 2018-02605
Type: Notice
Date: 2018-02-09
Agency: Federal Highway Administration, Department of Transportation
The FHWA is issuing this notice to advise the public that the Notice of Intent (NOI) for the preparation of an Environmental Impact Statement to study ways to reduce congestion, enhance safety, and improve traffic operation in the 14th Street Bridge Corridor (Interstate 395) is being rescinded. The NOI was published in the Federal Register on July 18, 2006. A draft EIS was released in January 2012. This rescission is based on a lack of available funding for the full corridor proposals and has led to identification of numerous individual projects of independent utility.
Rescinding the Notice of Intent for an Environmental Impact Statement (EIS): Manassas National Battlefield Park Bypass, Loudon, Fairfax, Fauquier and Prince William Counties, VA
Document Number: 2018-02602
Type: Notice
Date: 2018-02-09
Agency: Federal Highway Administration, Department of Transportation
The FHWA is issuing this notice to advise the public that the Notice of Intent (NOI) for the preparation of an EIS to identify and study alternative means of transportation for traffic currently using the two main public roadways (VA Routes 29 and 234) running through the Manassas National Battlefield Park is being rescinded. The NOI was published in the Federal Register on November 1, 2001. A draft EIS was released in January 2005. This rescission is based on a lack of available funding for the proposed new road alignments proposed by this project as well as lack of funding and planning approval for the Bi- County Parkway.
Aviation Rulemaking Advisory Committee; Meeting
Document Number: 2018-02596
Type: Notice
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of the ARAC.
Airworthiness Directives; Rosemount Aerospace, Inc. Pitot Probes
Document Number: 2018-02550
Type: Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Rosemount Aerospace Model 851AK pitot probes that were repaired by CSI Aerospace, Inc. between January 2013 and July 2014 that are installed on airplanes. This AD was prompted by a report that certain pitot probes are indicating the wrong airspeed during flight. This AD requires inspecting the airplane to determine the number of affected pitot probes installed and replacing the affected pitot probes. We are issuing this AD to address the unsafe condition on these products.
Establishment of Class E Airspace, Spanish Fork, UT
Document Number: 2018-02325
Type: Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace extending upward from 700 feet above the surface, at Spanish Fork Airport Springville- Woodhouse Field, Spanish Fork, UT, to accommodate new area navigation (RNAV) procedures at the airport. This action ensures the safety and management of Instrument Flight Rules (IFR) operations within the National Airspace System.
Establishment of Class E Airspace; Johnson City, TN
Document Number: 2018-02324
Type: Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace extending upward from 700 feet above the surface at Johnson City, TN, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures (SIAPs) serving Johnson City Medical Center Heliport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the heliport.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2018-02199
Type: Proposed Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 787 series airplanes. This proposed AD was prompted by reports that, under certain conditions, the automatic dependent surveillancebroadcast (ADS-B) out function and air traffic control/traffic alert and collision avoidance system (ATC/TCAS) functions can transmit incorrect data. This proposed AD would require an inspection or records review to determine if certain software is installed, the installation of new software for the integrated surveillance system (ISS) operational program software (OPS) if necessary, a software check, and applicable on-condition actions. For certain airplanes, this proposed AD would also require the installation of new software for the ISS OPS and the displays and crew alerting (DCA) database. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2018-02198
Type: Proposed Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2014-05- 28, for certain Bombardier, Inc., Model DHC-8-400 series airplanes. AD 2014-05-28 requires revising the maintenance or inspection program, as applicable. Since we issued AD 2014-05-28, we have determined that the interval from maintenance review board (MRB) task number 323100-202 should not be escalated, and that Certification Maintenance Requirements (CMR) task number 323100-102 should be applicable to all Model DHC-8-400 series airplanes, regardless of which main landing gear (MLG) up-lock assembly is installed. This proposed AD would require revising the maintenance or inspection program, as applicable. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2018-02197
Type: Proposed Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 767-300 and -300F series airplanes. This proposed AD was prompted by reports of fatigue cracking in the lower outboard wing skin at the farthest outboard fastener of the inboard segment of a certain stringer. This proposed AD would require repetitive high frequency eddy current (HFEC) inspections for cracking of the lower outboard wing skin at the inboard segment of a certain stringer, and repair if necessary. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2018-02193
Type: Proposed Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD was prompted by reports of cracks found in the rear spar web and lower chord on the left and right wings. This proposed AD would require repetitive detailed inspections for cracking of the rear spar web and lower chord, and applicable on- condition actions. We are proposing this AD to address the unsafe condition on these products.
Proposed Amendment of Class E Airspace, Hamilton, NY
Document Number: 2018-02143
Type: Proposed Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class E airspace at Hamilton Municipal Airport (formerly Elisha Payne Airport), Hamilton, NY, to accommodate airspace reconfiguration due to the decommissioning of the Georgetown VHF omni-directional radio range tactical air navigation aid (VORTAC), and cancellation of the VORTAC approach. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also would update the geographic coordinates of the airport, and update the airport name.
Proposed Amendment of Class D Airspace and Class E Airspace, and Removal of Class E Airspace; Binghamton, NY
Document Number: 2018-02140
Type: Proposed Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class D airspace, Class E surface airspace, and Class E airspace extending upward from 700 feet above the surface; and remove Class E airspace designated as an extension to a Class D surface area; at Greater Binghamton Airport/ Edwin A. Link Field (formerly Binghamton Regional Airport/Edwin A. Link Field), Binghamton, NY. This action would accommodate airspace reconfiguration due to the decommissioning of the Binghamton VHF omni- directional radio range tactical air navigation aid (VORTAC), and cancellation of the VOR approaches. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also would update the geographic coordinates of the airport, and correct the airport's name. Additionally, this action would replace the outdated term ``Airport/ Facility Directory'' with the term ``Chart Supplement'' in Class D and E surface airspace descriptions.
Amendment of Class D and E Airspace for the Following Missouri Towns; Cape Girardeau, MO; St. Louis, MO; and Macon, MO
Document Number: 2018-02139
Type: Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
This action modifies Class D airspace at Spirit of St. Louis Airport, St. Louis, MO; Class E airspace designated as a surface area at Cape Girardeau Regional Airport, Cape Girardeau, MO, and Spirit of St. Louis Airport; Class E airspace designated as an extension at Cape Girardeau Regional Airport; and Class E airspace extending upward from 700 feet above the surface at Cape Girardeau Regional Airport, Spirit of St. Louis Airport, and Macon-Fower Memorial Airport, Macon, MO. Cancellation of standard instrument approach procedures at these airports prompted the FAA to conduct a review of the airspace. Additionally, the name of Cape Girardeau Regional Airport (formerly Cape Girardeau Municipal Airport) and the geographic coordinates of St. Louis Regional Airport; Alton/St. Louis, IL; the OBLIO Locator Outer Marker (LOM); and the Macon-Fower Memorial Airport are being adjusted to coincide with the FAA's aeronautical database. The airspace designation for Macon-Fower, MO, in Class E airspace extending upward from 700 feet above the surface is being removed as it is a duplicate entry of the Macon, MO, airspace designation.
Revocation of Class E Airspace; Pulaski, WI
Document Number: 2018-02137
Type: Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
This action removes Class E airspace extending upward from 700 feet above the surface at Carter Airport, Pulaski, WI. The FAA is proposing this action due to the cancellation of the instrument procedures into the airport, resulting in the airport no longer qualifying for controlled airspace.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2018-01807
Type: Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. This AD was prompted by reports of corrosion in the aft fuselage. This AD requires a one-time review of the operator's maintenance procedures, repetitive detailed internal and external inspections for corrosion or cracking, and applicable on-condition actions. This AD also includes an optional terminating action for the inspections. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2018-01803
Type: Rule
Date: 2018-02-09
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2012-12-12 and AD 2013-16-26, which applied to all Airbus Model A330-200, A330-200 Freighter, A330-300, A340-200, and A340-300 series airplanes. AD 2012- 12-12 required repetitive inspections of the outer skin rivets of the cargo doors, repair if necessary, and other repetitive inspections. AD 2013-16-26 required repetitive inspections of certain cargo doors, and repair if necessary. This new AD continues to require repetitive inspections, and repair if necessary. This new AD revises the applicability; adds a one-time inspection and adjustment of certain hook gaps; reinforcement of the door frame structure; related investigative and corrective actions if necessary; and a modification, which allows deferring reinforcement of the cargo door structure. This AD was prompted by a determination that a new inspection procedure is necessary to address the unsafe condition. We are issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.