Department of Transportation 2017 – Federal Register Recent Federal Regulation Documents

This action amends the legal description of Class E surface area airspace at Mahlon Sweet Field Airport, Eugene, OR, adding the Notice to Airmen (NOTAM) part-time status. This action does not affect the charted boundaries or operating requirements of the airspace.

This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Hemphill County Airport, Canadian, TX, and Wheeler Municipal Airport, Wheeler, TX. The FAA is proposing this action due to the decommissioning of the Sayre co- located VHF omnidirectional range and tactical air navigation system (VORTAC) facility, which provided navigation guidance for the instrument procedures to these airports. The VORTAC is being decommissioned as part of the VHF omnidirectional range (VOR) Minimum Operational Network (MON) Program. This action would enhance the safety and management of instrument flight rules (IFR) operations at these airports. Additionally, the geographic coordinates of the airports would be adjusted to coincide with the FAA's aeronautical database.

We propose to supersede Airworthiness Directive (AD) 2001-16- 01, which applies to certain Airbus Model A330-301, -321, -322, -341, and -342 airplanes, and certain Model A340 series airplanes; and AD 2014-17-06, which applies to all Airbus Model A330-200 series airplanes, Model A330-200 Freighter series airplanes, and Model A330- 300 series airplanes. AD 2001-16-01 requires inspections for cracking of the aft cargo compartment door, and corrective action if necessary. AD 2014-17-06 requires revising the maintenance or inspection program, as applicable, to incorporate structural inspection requirements. Since we issued AD 2001-16-01 and AD 2014-17-06, we have determined that more restrictive maintenance instructions and airworthiness limitations are necessary. This proposed AD would require revising the maintenance or inspection program, as applicable, to incorporate new or revised airworthiness limitation requirements; and remove airplanes from the applicability. We are proposing this AD to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP airplanes. This proposed AD was prompted by a report of damage found at the lower trailing edge panels of the left wing and a broken fuse pin of the landing gear beam end fitting. This proposed AD would require repetitive replacement or inspection of certain fuse pins, and applicable on-condition actions. We are proposing this AD to address the unsafe condition on these products.

This action establishes Class E en route airspace extending upward from 1,200 feet above the surface to accommodate instrument flight rules (IFR) aircraft under control of the Oakland Air Route Traffic Control Center (ARTCC), centered near Sacramento, CA. Establishment of this airspace area is necessary to ensure controlled airspace exists in those areas where the Federal airway structure is inadequate.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200 and -200PF series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that certain areas of the frame webs are subject to widespread fatigue damage (WFD). This AD requires inspections of the frame webs for any crack of any open coordinating holes, tooling holes, and insulation blanket attachment holes; repair if necessary; and modification of the frame webs at all open hole locations, which would terminate the repetitive inspections. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain Airbus Model A320-212, -214, -232, and -233 airplanes. This AD was prompted by a report of a crack found during an inspection of the pocket radius of the fuselage frame. This AD requires repetitive low frequency eddy current inspections or repetitive high frequency eddy current inspections of this area, and repair if necessary. The repair terminates the repetitive inspections. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 757-200, -200PF, and -200CB series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that certain fuselage circumferential splice plates are subject to widespread fatigue damage (WFD). This AD requires repetitive low frequency eddy current (LFEC) inspections for cracks of certain circumferential splice plates, and repairs if necessary. We are issuing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. 14 CFR part 21 prescribes certification standards for aircraft, aircraft engines, propellers appliances and parts. The information collected is used to determine compliance and applicant eligibility. The respondents are aircraft parts designers, manufacturers, and aircraft owners.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The information is needed to determine an applicant's eligibility for an award of attorney's fees and other expenses under the Equal Access to Justice Act.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The FAA Office of the Associate Administrator for Commercial Space Transportation (AST) conducts this survey in order to obtain industry input on customer service standards which have been developed and distributed to industry customers.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The information collected is needed for applicants' noise certification compliance reports in order to demonstrate compliance with 14 CFR part 36.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. This collection involves response to the Wendall H. Ford Investment and Reform Act for the 21st Century which requires that all persons who remove any life-limited aircraft part have a method to prevent the installation of that part after it has reached its life limit.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. FAA regulations set safety and oversight rules for a broad variety of sightseeing and commercial air tour flights to improve the overall safety of commercial air tours by requiring all air tour.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The information is used to identify airmen to allow the agency to verify their foreign license being used to qualify for a US certificate. Respondents are holders of foreign licenses wishing to obtain US certificates.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The FAA requires that certain performance information be provided in the Rotorcraft Flight Manual in order to show compliance to the regulatory requirements. The flight manual, by regulation, must be furnished with each aircraft.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The survey will help the editors learn more about the target audience and how they elect to improve their safety skills/practices, and what they need to know to improve their safety skills/practices. With this information, the editors can craft FAA Safety Briefing content targeted to its audience to help accomplish the FAA and Department of Transportation's mission of improving safety.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. National Flight Data Center (NFDC) Web Portal forms are used to collect aeronautical information, detailing the physical description and operational status of all components of the National Airspace System (NAS).

FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for a new information collection, which is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.

The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for a new information collection, which is summarized below under Supplementary Information. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.

In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to approve the revisions of the following information collection: Survey of FTA Stakeholders.

In compliance with the Paperwork Reduction Act of 1995), this notice announces that the Information Collection Requirements (ICRs) abstracted below have been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describe the nature of the information collection and their expected burdens. The Federal Register notice with a 60-day comment period soliciting comments on the following collections of information was published on March 14, 2017 (82 FR 13923).

These special conditions are issued for the Gulfstream Aerospace Corporation (Gulfstream) GVII-G500 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport- category airplanes. This design feature is airbag systems on multiple- place and single-place side-facing seats. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.