Department of Transportation December 2016 – Federal Register Recent Federal Regulation Documents

This notice provides information regarding FHWA's finding that a Buy America waiver is appropriate for the use of non-domestic galvanized strands consisting of HDPE or HDPP sheath filled corrosion inhibitor meeting FDOT specification 938, ASTM and PTI requirements for SR-836/I-395 from West of I-95 to MacArthur Causeway Bridge in the State of Florida.

These special conditions are issued for the Gulfstream Aerospace Corporation (Gulfstream) Model GVII-G500 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is electronic flight- control-system (EFCS) mode annunciation. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 747-400, 747-400D, and 747-400F airplanes. This proposed AD was prompted by a report of a 13.4-inch crack in the left wing front spar web inboard of pylon number 2 between front spar station inboard (FSSI) 655.75 and FSSI 660, found following a fuel leak. This proposed AD would require repetitive detailed, ultrasonic, and high frequency eddy current inspections for cracking of the front spar web between FSSI 628 and FSSI 713, and repairs if necessary. We are proposing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The collection of information is necessary to document participation, completion, and compliance with the pilot training program for the MU-2B under the newly published subpart N of part 91 which will replace SFAR No. 108.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The FAA's Fuel Tank Flammability rule requires manufacturers to report to the FAA every six months for up to 5 years after the flammability reduction system is incorporated into the fleet. The data is needed to assure system performance meets that predicted at the time of certification.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. 14 CFR part 121 to ensure safety-of-flight by making certain that adequate training is obtained and maintained by those who operate under this part of the regulation.

On April 22, 2015, the Maritime Administration (MARAD) published a Notice of Proposed Policy Clarification (80 FR 22611) seeking comments on a proposed policy clarifying the application of the Cargo Preference Act of 1954 (CPA 1954), 46 U.S.C. 55305, to applications, commitments, and guarantees under MARAD's Federal Ship Financing Program (Title XI), 46 U.S.C. Chapter 537. This Notice finalizes MARAD's policy clarification.

This action proposes to modify VOR Federal airways V-16, V-94 and V-124, in the eastern United States due to the planned decommissioning of the Jacks Creek, TN, VOR/DME navigation aid.

We are adopting a new airworthiness directive (AD) for all Rolls-Royce plc (RR) RB211-Trent 875-17, RB211-Trent 877-17, RB211- Trent 884-17, RB211-Trent 884B-17, RB211-Trent 892-17, RB211-Trent 892B-17, and RB211-Trent 895-17 turbofan engines. This AD requires repetitive inspections of the engine upper bifurcation fairing and repairing or replacing any fairing that fails inspection. This AD was prompted by a report of cracking and material release from an engine upper bifurcation fairing. We are issuing this AD to prevent failure of the engine fire protection system, engine fire, and damage to the airplane.

The FAA is considering a request from the Laconia Airport Authority in Gilford, NH, to dispose of 2.96 acres of airport land that is not required for aviation purposes at Laconia Municipal Airport. The subject parcel has been identified as property no longer needed for aviation use by the Laconia Airport Authority (LAA). The property, Lot 13, located along the east side of Lily Pond Road (NH Route 11C) in the Town of Gilford, is located on the northerly side of the airport's existing business park. The intended use of the property is for boat storage, which is a compatible use adjacent to the airport. Given the location of the parcel, the disposal of this property will have no effect on aviation land nor future development opportunities for the airport. The proceeds of the disposal will be placed in the airport's account and to be used for the operation and maintenance of the airport. Appropriate avigation easements will be placed on the property to ensure compatibility with the airport and the airport's airspace.

This document denies a petition for rulemaking, submitted by Ms. Scheryn Bennett, requesting that the National Traffic Safety Administration (NHTSA) require every vehicle to be equipped with an emergency glass breaking tool. The data available to the agency shows there is a great deal of uncertainty surrounding the actual number of occupants that may have died due solely to drowning while trapped in an immersed vehicle. The potential effectiveness of such a tool to successfully aid an occupant's safe exit from an immersed vehicle is also not known. In the absence of a requirement that each vehicle have a glass breaking tool, nothing prevents vehicle manufacturers from providing a tool or other means to allow vehicle evacuation during immersion. Additionally, consumers can purchase their own tool and locate it in the vehicle where they would be likely to access it in an emergency.