Department of Transportation March 2016 – Federal Register Recent Federal Regulation Documents
Results 1 - 50 of 330
Removal of Class A Airspace Area Exclusion
This action removes a provision in part 71 that excludes from Class A airspace, that portion of U.S. domestic airspace that overlies the Santa Barbara and Farallon Islands and the airspace south of latitude 25[deg]04'00'' North (overlying and in the vicinity of the Florida Keys). The effect of this provision is that the airspace from 18,000 feet MSL up to and including Flight Level (FL) 600 (within the excluded areas) is classified as Class G (uncontrolled) airspace which limits the flexibility for air traffic control operations.
Proposed Agency Information Collection Activities; Comment Request
In compliance with the Paperwork Reduction Act of 1995, this notice announces that the renewal Information Collection Requests (ICRs) abstracted below are being forwarded to the Office of Management and Budget (OMB) for review and comment. The ICRs describe the nature of the information collections and their expected burden. The Federal Register notice with a 60-day comment period soliciting comments on the following collections of information was published on December 29, 2015.
Airworthiness Directives; Honeywell International Inc. (Type Certificate Previously Held by AlliedSignal Inc., Garrett Turbine Engine Company) Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain Honeywell International Inc. (Honeywell) TFE731-4, -4R, -5AR, -5BR, and -5R turbofan engines. This AD was prompted by a report of certain interstage turbine transition (ITT) ducts failing to meet containment capability requirements. This AD requires replacing certain ITT ducts. We are issuing this AD to prevent failure of the ITT duct, which could lead to an uncontained part release, damage to the engine, and damage to the airplane.
Airworthiness Directives; Weatherly Aircraft Company Airplanes
We are adopting a new airworthiness directive (AD) for all Weatherly Aircraft Company Models 201, 201A, 201B, 201C, 620, 620A, 620B, 620B-TG, and 620TP airplanes. This AD requires visually inspecting the center and outer wing front spar lower hinge fittings for cracks and corrosion and taking all necessary corrective actions. This AD also requires sending the inspection results to the FAA. This AD was prompted by a report of cracks found on the center wing front spar lower hinge fitting. We are issuing this AD to correct the unsafe condition on these products.
Hazardous Materials: Reverse Logistics (RRR)
In this final rule, the Pipeline and Hazardous Materials Safety Administration (PHMSA) is adopting regulatory amendments applicable to the reverse logistics shipments of certain hazardous materials by highway transportation. This final rule revises the Hazardous Materials Regulations (HMR) to include a definition of ``reverse logistics'' and provides appropriate provisions for hazardous materials within the scope of this definition. This final rule also expands a previously existing exception for return shipments of used automobile batteries transported between a retail facility and a recycling center. The PHMSA incorporated recommendations from petitions for rulemaking and public comment into this rulemaking.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-8 series airplanes. This AD requires an inspection to determine if all oxygen components in the passenger oxygen system are installed, installation of new o-rings, and corrective actions if necessary. This AD was prompted by a report that oxygen tube couplings in the passenger oxygen system could be missing or incorrectly installed. We are issuing this AD to detect and correct oxygen leaks from oxygen tube couplings in the passenger oxygen system, which could result in depletion of emergency oxygen at a faster rate than expected, reduce the passengers' and crews' protection from hypoxia at elevated cabin altitudes, and increase the risk of a fire.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-300, 747SR, and 747SP series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the upper chords of the upper deck floor beams are subject to widespread fatigue damage (WFD). This AD requires repetitive inspections for cracks at the floor panel attachment fastener holes; repetitive inspections for cracks in the upper and lower chords of the upper deck floor beams at permanent fastener locations; repetitive inspections for cracks in certain repaired and modified areas; and related investigative and corrective actions if necessary. This AD also requires repetitive replacement of the upper chords of the upper deck floor beams, including pre-replacement inspections and corrective action if necessary; and post-replacement repetitive inspections and repair if necessary. We are issuing this AD to detect and correct fatigue cracking of the upper chords of the upper deck floor beams. Undetected cracking could result in large deflection or deformation of the upper deck floor beams, resulting in damage to wire bundles and control cables for the flight control system, and reduced controllability of the airplane. Multiple adjacent severed floor beams could result in rapid decompression of the airplane.
Airworthiness Directives; BAE Systems (Operations) Limited Airplanes
We are adopting a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model BAe 146 series airplanes and Model Avro 146-RJ series airplanes. This AD was prompted by reports of cracking of the main fitting of the nose landing gear (NLG) and a determination that a new safe-life limitation for affected NLG main fittings has not been mandated. This AD requires replacing affected NLG main fittings that have exceeded the safe-life limitation with a new or serviceable fitting. We are issuing this AD to prevent collapse of the NLG, which if not corrected, could lead to degradation of direction control on the ground or an un-commanded turn to the left, and a consequent loss of control of the airplane on the ground, possibly resulting in damage to the airplane and injury to occupants.
Airworthiness Directives; Sikorsky Aircraft Corporation (Sikorsky) Helicopters
We are superseding Airworthiness Directive (AD) 2014-07-04R1 for certain Model S-92A helicopters. AD 2014-07-04R1 required repetitive inspections in the upper deck area for incorrectly installed clamps and chafing between the electrical wires and the hydraulic lines and replacing any unairworthy wires or hydraulic lines. This new AD requires altering the wiring system in the upper deck area to correct the unsafe condition described in AD 2014-07-04R1. We are issuing this AD to prevent a fire in an area of the helicopter without extinguishing capability and subsequent loss of control of the helicopter.
Notice of order soliciting community proposals
The Department of Transportation is soliciting proposals from communities or consortia of communities interested in receiving grants under the Small Community Air Service Development Program. The full text of the Department's order, including Appendices, is included in this Notice. As noted in the order, an application for a grant under this program must include a Grant Proposal of no more than 20 pages (one-sided only), a completed Application for Federal Domestic Assistance (SF424), a Summary Information Schedule, and any letters from the applicant community showing support.
Agency Information Collection Activities: Notice of Request for Approval of a New Information Collection
The FHWA has forwarded the information collection request described in this notice to the Office of Management and Budget (OMB) for approval of a new information collection. We published a Federal Register Notice with a 60-day public comment period on this information collection on June 23, 2015. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Proposed Establishment of Temporary Restricted Areas R-2509E, R-2509W, and R-2509N; Twentynine Palms, CA
This action proposes to establish temporary restricted areas R-2509E, R-2509W, and R-2509N, Twentynine Palms, CA, to support a Marine Expeditionary Brigade level Large Scale Exercise (LSE) planned for existing and newly acquired training lands at Marine Corps Air Ground Combat Center (MCAGCC), Twentynine Palms from August 1 to August 18, 2016.
Guidance on the Procedures and Process To Petition the Secretary Under the Airport and Airway Improvement Act
This final policy establishes the procedures and processes to petition the Secretary under the Airport and Airway Improvement Act 49 U.S.C. 47106(c)(1)(A)(ii). The Federal Aviation Administration (FAA) issued guidance on the procedures and process to petition the Secretary under 49 U.S.C. 47106(c)(1)(A)(ii) in the Federal Register on August 4, 2015. This guidance is intended to provide detail and clarity about who may petition the Secretary, when such a petition may be filed, how the petition may be made, and the procedures and process to petition the Secretary under this Section of the Airport and Airway Improvement Act.
Decision That Nonconforming Model Year 2014 Mercedes-Benz SLK Class Passenger Cars Are Eligible for Importation
This document announces a decision by the National Highway Traffic Safety Administration that certain model year (MY) 2014 Mercedes-Benz SLK Class passenger cars (PCs) that were not originally manufactured to comply with all applicable Federal Motor Vehicle Safety Standards (FMVSS) are eligible for importation into the United States because they are substantially similar to vehicles originally manufactured for sale in the United States and certified by their manufacturer as complying with the safety standards (the U.S. certified version of the MY 2014 Mercedes-Benz SLK Class PC), and they are capable of being readily altered to conform to the standards.
Chrysler Group LLC, Grant of Petition for Decision of Inconsequential Noncompliance
Chrysler Group LLC (Chrysler) \1\ has determined that certain model year (MY) 2013 and 2014 Fiat brand, 500e model, passenger cars do not fully comply with paragraph S5.4.1 of Federal Motor Vehicle Safety Standard (FMVSS) No. 101, Controls and Displays. Chrysler has filed an appropriate report dated April 1, 2014, pursuant to 49 CFR part 573, Defect and Noncompliance Responsibility and Reports. Chrysler then petitioned NHTSA under 49 CFR part 556 requesting a decision that the subject noncompliance is inconsequential to motor vehicle safety.
Nitto Tire U.S.A, Inc., Grant of Petition for Decision of Inconsequential Noncompliance
Nitto Tire U.S.A., Inc. (Nitto), has determined that certain Nitto NT05 passenger car tires manufactured between December 14, 2014 and August 1, 2015, do not fully comply with paragraph S5.5(e) of Federal Motor Vehicle Safety Standard (FMVSS) No. 139, New Pneumatic Radial Tires for Light Vehicles. Nitto filed a report \1\ pursuant to 49 CFR part 573, Defect and Noncompliance Responsibility and Reports. Nitto then petitioned NHTSA under 49 CFR part 556 requesting a decision that the subject noncompliance is inconsequential to motor vehicle safety.
Transportation Research and Development Strategic Plan
Section 6019 of the Fixing America's Surface Transportation Act (FAST Act; Pub. L. 114-94; December 4, 2015; codified at 49 U.S.C. 6503) requires that the Secretary develop a 5-year transportation research and development strategic plan to guide future Federal transportation research and development activities. The FAST Act states that the strategic plan shall ``describe how the plan furthers the primary purpose of the transportation research and development program.
Request for Comments
In accordance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the U.S. Department of Transportation (DOT) will forward the Information Collection Request (ICR) abstracted below to the Office of Management and Budget (OMB) for clearance. The ICR describes the nature of the information collection and its expected cost and burden hours. The Federal Register Notice, with a 60-day comment period soliciting comments on the questionnaire, was published on December 30, 2015, [FR Vol. 80, No. 250, page 81671]. One comment was received.
Notice of Rail Energy Transportation Advisory Committee Meeting
Notice is hereby given of a meeting of the Rail Energy Transportation Advisory Committee (RETAC), pursuant to the Federal Advisory Committee Act (FACA), 5 U.S.C. app. 2 10(a)(2).
Oil Spill Response Planning Workshop
This notice is to announce a public workshop to discuss Oil Spill Response Plans covered by PHMSA's Part 130 and Part 194 regulations. The purpose of the workshop is to bring federal regulators, interested members of the public, industry, and other stakeholders together to share knowledge and experiences with oil spill response planning and preparedness, gather ideas for harmonizing PHMSA's regulations with other agencies, and discuss practical ways regulated entities can better plan and prepare for an oil spill.
General Motors, LLC, Grant of Petition for Decision of Inconsequential Noncompliance
General Motors, LLC, (GM) has determined that certain model year (MY) 2014 GMC Sierra Denali vehicles do not fully comply with paragraph S3.1.4 of Federal Motor Vehicle Safety Standard (FMVSS) No. 102, Transmission shift position sequence, starter interlock, and transmission braking effect. GM filed a report dated January 31, 2014 pursuant to 49 CFR part 573, Defect and Noncompliance Responsibility and Reports. GM then petitioned NHTSA under 49 CFR part 556 requesting a decision that the subject noncompliance is inconsequential to motor vehicle safety.
Amendment of Class D Airspace and Class E Airspace; Lynchburg, VA
This action changes the effective date of a final rule published in the Federal Register of February 4, 2016, amending Class E surface area airspace at Lynchburg, VA, by adjusting the geographic coordinates at Lynchburg Regional-Preston Glenn Field Airport, and Falwell Airport. This correction updates the geographic coordinates of the above airports in Class D airspace, Class E airspace designated as an extension, and Class E airspace extending upward from 700 feet above the surface, and adds Class D Airspace to the title.
Amendment of Class D Airspace and Class E Airspace for the Following New York Towns; Ithaca, NY; Poughkeepsie, NY
This action changes the effective date of a final rule published in the Federal Register of February 4, 2016, amending Class E Airspace designated as an extension at Ithaca Tompkins Regional Airport, Ithaca, NY; and the Kingston VORTAC, Poughkeepsie, NY. This correction updates the geographic coordinates of each navigation aid and Ithaca Tompkins Regional Airport (formerly Tompkins County Airport), under Class D airspace and Class E surface area airspace to coincide with the FAA's aeronautical database. Also, Dutchess County Airport is added to the Kingston VORTAC, Poughkeepsie, NY, designation in Class E airspace designated as an extension. The Kingston VORTAC reference is removed from the Class D airspace designation. This action also adds Class D airspace to the title of this rulemaking.
Flight Simulation Training Device Qualification Standards for Extended Envelope and Adverse Weather Event Training Tasks
The FAA has determined this rule is necessary to amend the Qualification Performance Standards for flight simulation training devices (FSTDs) for the primary purpose of improving existing technical standards and introducing new technical standards for full stall and stick pusher maneuvers, upset recognition and recovery maneuvers, maneuvers conducted in airborne icing conditions, takeoff and landing maneuvers in gusting crosswinds, and bounced landing recovery maneuvers. These new and improved technical standards are intended to fully define FSTD fidelity requirements for conducting new flight training tasks introduced through recent changes to the air carrier training requirements, as well as to address various National Transportation Safety Board (NTSB) and Aviation Rulemaking Committee recommendations. This final rule also updates the FSTD technical standards to better align with the current international FSTD evaluation guidance and introduces a new FSTD level that expands the number of qualified flight training tasks in a fixed-base flight training device. These changes will ensure that the training and testing environment is accurate and realistic, will codify existing practice, and will provide greater harmonization with international guidance for simulation. The amendments will not apply to previously qualified FSTDs with the exception of the FSTD Directive, which codifies the new FSTD technical standards for specific training tasks.
Redesignation and Expansion of Restricted Area R-4403; Gainesville, MS
This action removes restricted area R-4403 Gainesville, MS, and replaces it with an expanded area redesignated as R-4403A, B, C, E and F, Stennis Space Center (SSC), MS (the designation R-4403D is not used). The expanded restricted airspace is necessary to support essential National Aeronautics and Space Administration (NASA) testing and Naval Special Warfare Command (NSWC) training requirements.
Renewal of the U.S. Maritime Transportation System National Advisory Committee and Solicitation of Nominations for Membership
Pursuant to authority delegated by the Secretary of Transportation (Secretary) to the Maritime Administrator (Administrator) and the Federal Advisory Committee Act implementing regulations, the Maritime Administration (MARAD) announces the renewal of the U.S. Maritime Transportation System National Advisory Committee (Committee or MTSNAC), by the Secretary of Transportation. The Committee will advise the Secretary on solutions to impediments hindering effective use of short sea transportation and other matters as the Secretary determines. Duration of the MTSNAC is for two years unless renewed by the Secretary. This notice also requests nominations for membership on the Committee.
Notice of Funding Opportunity for the Advanced Transportation and Congestion Management Technologies Deployment Program
The Fixing America's Surface Transportation (FAST) Act directs the DOT to establish an advanced transportation and congestion management technologies deployment (ATCMTD) initiative. The initiative provides grants to eligible entities to develop model deployment sites for large scale installation and operation of advanced transportation technologies to improve safety, efficiency, system performance, and infrastructure return on investment. The ATCMTD program is funded for fiscal years (FY) 2016 through 2020 at $60 million per FY from amounts authorized under sections 6002(a)(1), 6002(a)(2), and 6002(a)(4) of the FAST Act. This notice is the first of annual solicitations for the ATCMTD program and seeks applications from eligible entities to establish the initial set of model technology deployment sites. The DOT intends for these model technology deployments to help demonstrate how emerging transportation technologies, data, and their applications, which also link to Beyond Traffic 2045, can be effectively deployed and integrated with existing systems to provide access to essential services and other destinations. This also includes efforts to increase connectivity to employment, education, services and other opportunities; support workforce development; and contribute to community revitalization, particularly for disadvantaged groups (e.g., low income groups, persons with visible or hidden disabilities, elderly individuals, and minority populations). The DOT will make no fewer than five and no more than 10 awards of up to $12 million each depending on the number of awards and amounts set aside for DOT administrative expenses.
Notice of Funding Opportunity for Surface Transportation System Funding Alternatives Program
Section 6020 of the Fixing America's Surface Transportation (FAST) Act directs the DOT to establish the Surface Transportation System Funding Alternatives (STSFA) program to provide grants to States to demonstrate user-based alternative revenue mechanisms that utilize a user fee structure to maintain the long-term solvency of the Federal Highway Trust Fund. Section 6020 provides $15 million for fiscal year (FY) 2016 and $20 million for each of FYs 2017-2020 out of funds set aside in section 6002(a)(1), which authorizes funds for the Highway Research and Development Program. These grants shall make up no more than 50 percent of total proposed project costs, with the remainder coming from non-Federal sources. This Notice of Funding Opportunity for the STSFA program seeks applications from States or groups of States.
Hours of Service of Drivers: Oregon Trucking Associations (OTA) Exemption; FAST Act Extension of Compliance Date
FMCSA announces the extension of the exemption granted to the Oregon Trucking Associations (OTA) on March 18, 2015, for certain timber operations in Oregon. The Agency extends the expiration date from March 18, 2017 to March 18, 2020 in response to section 5206(b)(2)(A) of the ``Fixing America's Surface Transportation Act'' (FAST Act). That section extends the expiration date of hours-of- service (HOS) exemptions in effect on the date of enactment of the FAST Act to 5 years from the date of issuance of the exemptions. The OTA exemption from the Agency's 30-minute rest break requirement is limited to commercial motor vehicle (CMV) drivers engaged in transporting timber from Oregon forestlands, and further limited to periods of the year in which the Oregon Department of Forestry (ODF) has formally restricted logging operations to certain hours of the day due to an elevated risk of forest fire. The Agency previously determined that the CMV operations of OTA timber transporters under this exemption would likely achieve a level of safety equivalent to or greater than the level of safety that would be obtained in the absence of the exemption.
FY16 Competitive Funding Opportunity: Grants for Buses and Bus Facilities and Low or No Emission Grant Programs; 5339(b) Grants for Buses and Bus Facilities Program and 5339(c) Low or No Emission Program
The Federal Transit Administration (FTA) announces the availability of approximately $211 million of Fiscal Year (FY) 2016 funds for the Section 5339(b) Grants for Buses and Bus Facilities Competitive Grant Program (Bus Program) and approximately $55 million for 5339(c) Low or No Emission Bus Competitive Grant Program (Low-No Program). Funds awarded for the Bus Program will finance capital projects to replace, rehabilitate, purchase or lease buses and related equipment and to rehabilitate, purchase, construct or lease bus-related facilities, including programs of bus and bus-related projects for subrecipients that are public agencies, private companies engaged in public transportation, or private non-profit organizations. Funds awarded for the Low-No Program will finance the purchase or lease of low or no emission vehicles that use advanced technologies, including related equipment or facilities, for transit revenue operations. Projects may include costs incidental to the acquisition of buses or to the construction of facilities, such as the costs of related workforce development and training activities, and project development. FTA may award additional funding that is made available to the program prior to the announcement of project selections.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and 900ER series airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that the S-14L and S-14R lap splices are subject to widespread fatigue damage (WFD). This proposed AD would require repetitive low frequency eddy current inspections for cracking in the lower fastener row of the S-14L and S-14R lap splices and repair if necessary. We are proposing this AD to detect and correct widespread cracking in the S-14L and S-14R lap splices that could rapidly link up and result in possible rapid decompression and reduced structural integrity of the airplane.
Airworthiness Directives; Fokker Services B.V. Airplanes
We propose to adopt a new airworthiness directive (AD) for all Fokker Services B.V. Model F.28 Mark 0070 and Mark 0100 airplanes. This proposed AD was prompted by reports of cracking in a certain area of the pressure bulkhead webplate and skin connection angle. This proposed AD would require a one-time inspection of the affected pressure bulkhead webplate and skin connection angle, and corrective actions if necessary. We are proposing this AD to detect and correct cracking of the pressure bulkhead webplate and skin connection angle that could lead to sudden inflight decompression of the airplane resulting in injury to occupants.
Rides to Wellness Demonstration and Innovative Coordinated Access and Mobility Grants
The Federal Transit Administration (FTA) announces the availability of approximately $5.3 million of funding from two programs to support the Rides to Wellness Demonstration and Innovative Coordinated Access and Mobility Grants (R2W Demonstration Grants). The funding sources are: Section 3006(b) of the Fixing America's Surface Transportation Act (FAST), Pub. L. 114-94, which authorizes a pilot program for innovative coordinated access and mobility; and 49 U.S.C. 5312 (Section 5312). The goal of the competitive R2W Demonstration Grants is to find and test promising, replicable public transportation healthcare access solutions that support the following goals: increased access to care, improved health outcomes and reduced healthcare costs. Eligible applicants include: States, Tribes, and Designated or Direct Recipients for funds under 49 U.S.C. 5307, 5310 or 5311. Proposers must serve as the lead agency of a local consortium that includes stakeholders from the transportation, healthcare, human service or other sectors. Members of this consortium are eligible as subrecipients. Further, proposers must demonstrate that the proposed project was planned through an inclusive process with the involvement of the transportation, healthcare and human service industries. Eligible projects must have implementation-ready capital and operating projects that enhance access, such as: mobility management; health and transportation provider partnerships; technology; and other actions that drive change. These R2W Demonstration Grants will develop best practice solutions that other communities can replicate. This announcement is available on the FTA Web site at: https:// www.fta.dot.gov/legislation_law/federal_register_notices.php. A synopsis of this funding opportunity will be posted in the FIND module of the government-wide electronic grants Web site at https:// www.GRANTS.GOV. FTA will announce final selections on the FTA Web site and may also announce selections in the Federal Register.
Proposed Amendment of Class E Airspace for the Following Kansas Towns; Belleville, KS; Johnson, KS; Marysville, KS; Pittsburg, KS; and Washington, KS
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Belleville Municipal Airport, Belleville, KS; Stanton County Municipal, Johnson, KS; Marysville Municipal Airport, Marysville, KS; Atkinson Municipal Airport, Atkinson, KS; and Washington County Memorial Airport, Washington, KS. Decommissioning of non-directional radio beacon (NDB), cancellation of NDB approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safe management of Instrument Flight Rules (IFR) operations at the above airports. This action also updates the geographic coordinates at Marysville Municipal Airport and Atkinson Municipal Airport to coincide with the FAA's aeronautical database.
Airworthiness Directives; Honeywell International Inc. Turboprop Engines
We propose to supersede airworthiness directive (AD) 2015-12- 04, which applies to all Honeywell International Inc. (Honeywell) TPE331-1, -2, -2UA, -3U, -3UW, -5, -5A, -5AB, -5B, -6, -6A, -10, -10AV, -10GP, -10GT, -10P, -10R, -10T, -10U, -10UA, -10UF, -10UG, -10UGR, - 10UR, -11U, -12JR, -12UA, -12UAR, and -12UHR turboprop engines with certain Woodward fuel control unit (FCU) assemblies, installed. AD 2015-12-04 currently requires initial and repetitive dimensional inspections of the affected fuel control drives and insertion of certain airplane operating procedures into the applicable flight manuals. This proposed AD would correct compliance requirements and relax the inspection interval. We are proposing this AD to prevent failure of the fuel control drive, damage to the engine, and damage to the airplane.
Amendment of Class E Airspace; Butte, MT
This action modifies Class E surface area airspace and Class E airspace extending upward from 700 feet above the surface at Bert Mooney Airport, Butte, MT. After a review, the FAA found it necessary to amend the standard instrument approach procedures for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Amendment of Class E Airspace; Deer Lodge MT
This action modifies Class E airspace extending upward from 700 feet above the surface at Deer Lodge- City-County Airport, Deer Lodge, MT. After a review, the FAA found it necessary to amend the airspace area for the safety and management of standard instrument approach procedures for Instrument Flight Rules (IFR) operations at the airport.
Amendment of Class E Airspace for the Following Tennessee Towns: Jackson, TN; Tri-Cities, TN
This action amends Class E Airspace at McKellar-Sipes Regional Airport, Jackson, TN, and Tri-Cities Regional Airport, Tri-Cities, TN, by eliminating the Notice to Airmen (NOTAM) part time status of the Class E airspace designated as an extension at each airport. This is an administrative change to coincide with the FAA's aeronautical database.
Amendment of Class D and Class E Airspace for the Following Minnesota Towns: Rochester, MN; and St. Cloud, MN
This action changes the effective date of a final rule published in the Federal Register of February 8, 2016, amending Class E surface area airspace and Class E airspace designated as an extension at Rochester International Airport, Rochester, MN; and St. Cloud Regional Airport, St. Cloud, MN. This correction adds the part-time Notice to Airmen (NOTAM) language inadvertently removed from the Class E surface area descriptions for the above airports. Additionally, adjustment is made to the geographic coordinates of Rochester International Airport in the Class D airspace and Class E airspace extending upward from 700 feet above the surface. The Title is also amended to include Class D airspace.
Airworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Defense and Space S.A. Model CN-235, CN-235-100, CN-235-200, and CN-235-300 airplanes. This AD was prompted by a report of cracks on the lugs of the inboard and outboard control rod fittings of the right hand (RH) and left hand (LH) side ailerons. This AD requires a one-time non- destructive test (NDT) inspection of the inboard and outboard control rod fittings of the RH and LH side ailerons for cracks and corrosion, and repair if necessary. We are issuing this AD to detect and correct cracks and corrosion on the lugs of the inboard and outboard control rod fittings of the RH and LH side ailerons, which could lead to reduced controllability of the airplane.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A319, A320, and A321 series airplanes. This AD was prompted by investigations that revealed that the cover seal of the brake dual distribution valve (BDDV) was damaged and did not ensure efficient sealing. This AD requires modifying the BDDVs having certain part numbers; modifying the drain hose of the BDDV; checking for the presence of water, ice, and hydraulic fluid; re-identifying the BDDV; and doing related investigative and corrective actions if necessary. We are issuing this AD to prevent damage to the BDDV, which could lead to water ingestion in the BDDV and freezing of the BDDV in flight, possibly resulting in loss of braking system function after landing.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-200 and -300 series airplanes; and all Model A340- 200, -300, -500, and -600 series airplanes. This AD was prompted by reports that the potable water service panel access door was lost during flight. This AD requires modifying affected potable water service panel access doors. We are issuing this AD to prevent failure of the latching mechanism of the potable water service panel access door, which could result in the loss of the potable water service panel access door during flight, and resultant damage to the airplane (e.g., damage to the trimmable horizontal stabilizer) that could cause loss of control of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This AD was prompted by a report of fuel leaking onto the hot exhaust portion of an engine as a result of an unintended leak path from the leading edge through the pylon. This AD requires installing new seal dams in the inboard and outboard corners of the aft pylon frame on the left and right engines, including an inspection for damage of the outboard blade seal and applicable corrective actions. We are issuing this AD to prevent fuel leaking from an unintended drain path from the leading edge through either the left or right pylon and onto the hot engine parts or brakes, which could lead to a major ground fire.
Agency Information Collection Activities: Request for Comments for a New Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for a new information collection, which is summarized below under SUPPLEMENTARY INFORMATION. We published a Federal Register Notice with a 60-day public comment period on this information collection on January 21, 2016. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Review of Commodity, Boxcar, and Trailer-on-Flatcar/Container-on-Flatcar (TOFC/COFC) Exemptions
The Surface Transportation Board (Board or STB) seeks public comment on its proposal to revoke the existing class exemptions for crushed or broken stone or rip rap; hydraulic cement; and coke produced from coal, primary iron or steel products, and iron or steel scrap, wastes or tailings. The Board also invites interested parties to file, during the comment period for these proposed rules, comments regarding the possible revocation of other commodity class exemptions.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces receipt of applications from 22 individuals for exemption from the vision requirement in the Federal Motor Carrier Safety Regulations. They are unable to meet the vision requirement in one eye for various reasons. The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the prescribed vision requirement in one eye. If granted, the exemptions would enable these individuals to qualify as drivers of commercial motor vehicles (CMVs) in interstate commerce.
Commercial Driver's License Standards: Application for Exemption; Daimler Trucks North America (Daimler)
FMCSA announces that Daimler Trucks North America (Daimler) has requested a renewal of an exemption for one commercial motor vehicle (CMV) driver from the Federal requirement to hold a U.S. commercial driver's license (CDL). Daimler requests a five-year exemption for Dr. Wolfgang Bernhard, head of the Daimler Trucks and Bus Division, who will test drive CMVs for Daimler within the United States. Dr. Bernhard holds a valid German commercial license and wants to test drive Daimler vehicles on U.S. roads to better understand product requirements in ``real world'' environments, and verify results. Daimler believes the requirements for a German commercial license ensure that operation under the exemption will likely achieve a level of safety equivalent to or greater than the level that would be obtained in the absence of the exemption.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
