Department of Transportation May 27, 2015 – Federal Register Recent Federal Regulation Documents
Results 1 - 20 of 20
Revisions to Denied Boarding Compensation, Domestic Baggage Liability Limits, and Civil Penalty Amounts
In accordance with existing regulations, this final rule raises the maximum denied boarding compensation (DBC) amounts that have been in effect since August 2011, raising the maximum DBC amounts from the current figures of $650/$1,300 to $675/$1,350. Also, in accordance with existing regulations, this final rule raises the minimum liability limit air carriers may impose for mishandled baggage in domestic air transportation, adjusting the minimum limit of liability from the current amount of $3,400 to $3,500. To account for inflation, this rule also raises the maximum civil penalties that can be assessed as a result of DOT aviation enforcement actions for violations of certain economic provisions of Title 49 of the U.S. Code from $2,500 to $2,750.
Buy America Waiver Notification
This notice provides information regarding FHWA's finding that a Buy America waiver is appropriate for the obligation of Federal-aid funds for 21 State projects involving the acquisition of vehicles and equipment on the condition that they be assembled in the U.S.
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel RONIN; Invitation for Public Comments
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel TRILOGY; Invitation for Public Comments
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel QUEEN ANNE; Invitation for Public Comments
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel KOOKABURRA; Invitation for Public Comments
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel ANTHEM; Invitation for Public Comments
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Special Conditions: Bombardier Aerospace, Models BD-500-1A10 and BD-500-1A11; Electronic Flight Control System: Lateral-Directional and Longitudinal Stability and Low-Energy Awareness
These special conditions are issued for the Bombardier Aerospace Models BD-500-1A10 and BD-500-1A11 series airplanes. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is a fly-by-wire electronic flight control system that provides an electronic interface between the pilot's flight controls and the flight control surfaces for both normal and failure states. The system generates the actual surface commands that provide for stability augmentation and control about all three airplane axes. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Bombardier Aerospace, Models BD-500-1A10 and BD-500-1A11 Series Airplanes; Operation Without Normal Electrical Power
These special conditions are issued for the Bombardier Aerospace Models BD-500-1A10 and BD-500-1A11 series airplanes. These airplanes will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These design features are electrical and electronic systems that perform critical functions, the loss of which could be catastrophic to the airplane. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Reports, Forms, and Record Keeping Requirements
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below will be forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden.
Lease and Interchange of Vehicles; Motor Carriers of Passengers
FMCSA adopts regulations governing the lease and interchange of passenger-carrying commercial motor vehicles (CMVs) to: Identify the motor carrier operating a passenger-carrying CMV that is responsible for compliance with the Federal Motor Carrier Safety Regulations (FMCSRs); and ensure that a lessor surrenders control of the CMV for the full term of the lease or temporary exchange of CMVs and drivers. This action is necessary to ensure that unsafe passenger carriers cannot evade FMCSA oversight and enforcement by entering into a questionable lease arrangement to operate under the authority of another carrier that exercises no actual control over those operations. This rule will enable the FMCSA, the National Transportation Safety Board (NTSB), and our Federal and State partners to identify motor carriers transporting passengers in interstate commerce and correctly assign responsibility to these entities for regulatory violations during inspections, compliance investigations, and crash investigations. It also provides the general public with the means to identify the responsible motor carrier at the time transportation services are provided.
Commercial Driver's License Standards; Regulatory Guidance Concerning the Passenger Endorsement Requirements
FMCSA responds to a question whether a commercial driver's license (CDL) passenger endorsement is required for drivers of certain custom motorcoaches designed or used to transport fewer than 16 passengers, including the driver. The guidance explains that a passenger endorsement is required because the vehicle is intended to transport passengers rather than cargo.
Proposed Amendment of Class E Airspace; Chehalis, WA
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at ChehalisCentralia Airport, Chehalis, WA, to enhance the safety and management of Instrument Flight Rules (IFR) operations for Standard Instrument Approach Procedures (SIAPs) at the airport.
Proposed Amendment of Class E Airspace; Toledo, WA
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Ed Carlson Memorial Field- South Lewis County Airport, Toledo, WA. The FAA found modification of the airspace necessary for the safety and management of Instrument Flight Rules (IFR) operations for Standard Instrument Approach Procedures (SIAPs) at the airport.
Proposed Amendment of Class E Airspace; Kelso, WA
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Southwest Washington Regional Airport, Kelso, WA, to enhance the safety and management of Instrument Flight Rules (IFR) operations for Standard Instrument Approach Procedures (SIAPs) at the airport.
Proposed Amendment of Class E Airspace; Santa Rosa, CA
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at the Charles M. Schulz-Sonoma County Airport, Santa Rosa, CA. The FAA found modification of the airspace area above 1,200 feet is no longer needed for standard instrument approach procedures at the airport. This action is necessary for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Electronic Applications for Licenses, Permits, and Safety Approvals
Currently, an application for a license or experimental permit, or for a safety approval must be submitted to the FAA in paper form. This rule will make the application process more flexible and efficient by providing applicants with an option to submit these applications to the FAA electronically (either via email or on an electronic storage device) rather than submitting a paper application.
Airworthiness Directives; Slingsby Aviation Ltd. Airplanes
We are adopting a new airworthiness directive (AD) for Slingsby Aviation Ltd. Models T67M260 and T67M260-T3A airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as failure of a brake master cylinder pivot pin. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; International Aero Engines AG Turbofan Engines
We are superseding Airworthiness Directive (AD) 2012-09-09 for all International Aero Engines AG (IAE) V2500-A1, V2525-D5, and V2528- D5 turbofan engines, and certain serial numbers (S/Ns) of IAE V2522-A5, V2524-A5, V2527-A5, V2527E-A5, V2527M-A5, V2530-A5, and V2533-A5 turbofan engines. AD 2012-09-09 required cleaning, eddy current inspection (ECI) or fluorescent penetrant inspection (FPI), and initial and repetitive ultrasonic inspections (USIs) of certain high-pressure compressor (HPC) stage 3 to 8 drums, as well as replacement of the drum attachment nuts. This new AD expands the affected population for initial and repetitive USIs of the HPC stage 3 to 8 drum, revises the inspection intervals, requires performing ECI or FPI, requires removal of the affected attachment nuts and any HPC stage 3 to 8 drum found cracked, and adds a mandatory terminating action. This AD was prompted by the discovery that additional attachment nuts for certain HPC stage 3 to 8 drums are affected. We are issuing this AD to prevent failure of the HPC stage 3 to 8 drum, which could result in uncontained drum failure, damage to the engine, and damage to the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.