Department of Transportation April 6, 2011 – Federal Register Recent Federal Regulation Documents

Airworthiness Directives; Airbus Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)
Document Number: 2011-8198
Type: Proposed Rule
Date: 2011-04-06
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), Model CL-600-2D15 (Regional Jet Series 705), and Model CL-600-2D24 (Regional Jet Series 900) Airplanes
Document Number: 2011-8197
Type: Proposed Rule
Date: 2011-04-06
Agency: Federal Aviation Administration, Department of Transportation
We are revising an earlier NPRM for the products listed above. This action revises the earlier NPRM by expanding the scope. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
City of Davenport, Iowa-Construction and Operation Exemption-in Scott County, Iowa
Document Number: 2011-8158
Type: Notice
Date: 2011-04-06
Agency: Surface Transportation Board, Department of Transportation
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 212 Helicopters
Document Number: 2011-8133
Type: Rule
Date: 2011-04-06
Agency: Federal Aviation Administration, Department of Transportation
We are superseding an existing emergency airworthiness directive (EAD) for the Bell Helicopter Textron, Inc. (Bell) Model 212 helicopters with a certain main rotor hub inboard strap fitting (fitting) installed. That EAD requires, before further flight, removing certain serial-numbered fittings and replacing them with airworthy fittings. It also requires performing a magnetic particle inspection (MPI) on fittings with certain serial numbers (S/Ns) to inspect for a crack. If a crack is found, the cracked fitting must be replaced with an airworthy fitting, and certain data must be reported to the FAA. This airworthiness directive (AD) retains the requirements of that EAD and expands the applicability to require performing an MPI for a crack on additional serial-numbered fittings. This AD is prompted by the determination that certain fittings were not manufactured in accordance with the approved manufacturing processes and controls. In total, eight fittings have been found that have cracks. We are issuing this AD to prevent failure of a fitting, loss of a main rotor blade, and subsequent loss of control of the helicopter.
Petition for Rulemaking-Classification of Polyurethane Foam and Certain Finished Products Containing Polyurethane Foam as Hazardous Materials
Document Number: 2011-8103
Type: Notice
Date: 2011-04-06
Agency: Pipeline and Hazardous Materials Safety Administration, Department of Transportation
On March 30, 2007, a notice [72 FR 15184] was published in the Federal Register soliciting comments on the merits of a petition for rulemaking filed by the National Association of State Fire Marshals (NASFM). The NASFM petitioned PHMSA to classify polyurethane foam and certain finished products containing polyurethane foam as hazardous material for purposes of transportation in commerce. The comment period for the notice closed June 28, 2007. Subsequently, on October 19, 2007, the NASFM requested that action be deferred on the petition, and that the public docket be re-opened to allow interested persons to submit additional comments on the March 30, 2007 notice, and on supplemental information submitted by the petitioner. On May 7, 2008, a notice [73 FR 25825] was published in the Federal Register re-opening the comment period and indicating that it would remain open until further notice had been published in the Federal Register. Since re-opening of the comment period, no additional or supplemental information have been submitted to PHMSA to support the contention that polyurethane foam and certain finished products containing polyurethane foam should be designated as hazardous materials when transported in commerce. As well, no further comments have been submitted to suggest we continue to pursue any further action on this subject. Therefore, in light of the fact that the comment period had been extended and remained opened for more than three years, with no further comment or data having been submitted to PHMSA to support proposals contained in petition P-1491 or the NASFM's October 19, 2007 supplemental letter, issuance of this notice closes the comment period for the March 30, 2007 Notice [72 FR 15184] and the May 7, 2008 Notice [73 FR 25825], under Docket No. PHMSA-2006-26275. Docket: For access to the docket to read background documents or comments received, go to https://www.regulations.gov or Docket Operations, U.S. Department of Transportation, West Building, Ground Floor, Room W12-140, Routing Symbol M-30, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001, between 9 a.m. and 5 p.m., Monday through Friday, except Federal Holidays. Privacy Act: Anyone is able to search the electronic form of any written communications and comments received into any of our dockets by the name of the individual submitting the document (or signing the document, if submitted on behalf of an association, business, labor union, etc.). You may review DOT's complete Privacy Act Statement in the Federal Register published on April 11, 2000 (Volume 65, Number 70; Pages 19477-78), which may also be found at https://www.regulations.gov.
Agency Information Collection Activities: Notice of Request for Extension of Currently Approved Information Collection
Document Number: 2011-8101
Type: Notice
Date: 2011-04-06
Agency: Federal Highway Administration, Department of Transportation
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for renewal of an existing information collection that is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Agency Information Collection Activities: Notice of Request for Extension of Currently Approved Information Collection
Document Number: 2011-8100
Type: Notice
Date: 2011-04-06
Agency: Federal Highway Administration, Department of Transportation
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for renewal of an existing information collection that is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Spyker Automobielen B.V.; Receipt of Application for Extension of Temporary Exemption From Certain Requirements of FMVSS No. 208
Document Number: 2011-8082
Type: Notice
Date: 2011-04-06
Agency: National Highway Traffic Safety Administration, Department of Transportation
In accordance with the procedures in 49 CFR Part 555, Spyker Automobielen B.V. (Spyker) has applied for an extension of a previously granted temporary exemption from certain advanced air bag requirements of FMVSS No. 208, Occupant Crash Protection, for its C line of vehicles. The basis of the application is that compliance would cause substantial economic hardship to a manufacturer that has tried in good faith to comply with the standard. NHTSA is publishing this notice of receipt of the application in accordance with the requirements of 49 U.S.C. 30113(b)(2), and has made no judgment on the merits of the application.
Airworthiness Directives; Costruzioni Aeronautiche Tecnam srl Model P2006T Airplanes
Document Number: 2011-8070
Type: Proposed Rule
Date: 2011-04-06
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Commercial Driver's License Information System State Procedures Manual, Release 5.2.0
Document Number: 2011-8061
Type: Proposed Rule
Date: 2011-04-06
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA proposes to amend the Federal Motor Carrier Safety Regulations (FMCSRs) to incorporate by reference the most recent version of the American Association of Motor Vehicle Administrators, Inc.'s (AAMVA) Commercial Driver's License Information System (CDLIS) State Procedures Manual (the Manual). All State driver licensing agencies would use this updated version of the Manual to develop the process required in transmitting, receiving, recording and updating information on a CDLIS driver record. Such information includes, but is not limited to, the commercial driver's license (CDL) holder's physical description, commercial and noncommercial driving status, medical certification status, convictions, disqualifications and accidents. The purpose of this proposal is to enhance the safety of commercial motor vehicle (CMV) operations on our nation's highways.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.