Department of Transportation April 1, 2011 – Federal Register Recent Federal Regulation Documents
Results 1 - 20 of 20
Receipt of Noise Compatibility Program and Request for Review; Kissimmee Gateway Airport, Kissimmee, FL
The Federal Aviation Administration (FAA) announces that it is reviewing a proposed Noise Compatibility Program that was submitted for Kissimmee Gateway Airport under the provisions of 49 U.S.C. 47504 et seq. (the Aviation Safety and Noise Abatement Act hereinafter referred to as ``the Act'') and 14 CFR Part 150 by the City of Kissimmee. This program was submitted subsequent to a determination by FAA that the associated Noise Exposure Maps submitted under 14 CFR Part 150 for Kissimmee Gateway Airport were in compliance with applicable requirements effective 12/11/09, and was published in the Federal Register on 12/29/09. The proposed Noise Compatibility Program will be approved or disapproved on or before September 27, 2011.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2011-0033 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084, April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2011-0031 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084, April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD- 2011-0034 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084, April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2011-0032 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084, April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.
Track Safety Standards; Concrete Crossties
FRA is amending the Federal Track Safety Standards to promote the safety of railroad operations over track constructed with concrete crossties. In particular, FRA is mandating specific requirements for effective concrete crossties, for rail fastening systems connected to concrete crossties, and for automated inspections of track constructed with concrete crossties.
Notice of Availability of a Final Environmental Impact Statement for the DesertXpress High-Speed Passenger Train Project
FRA is issuing this notice to advise the public that a Final Environmental Impact Statement (EIS) is being published for the DesertXpress High-Speed Passenger Train Project (DesertXpress project). FRA is the Lead Agency for the environmental review process and has prepared the Final EIS consistent with the provisions of Section 102(2)(c) of the National Environmental Policy Act (NEPA) of 1969 (42 U.S.C. 4321 et seq.), the Counsel of Environmental Quality (CEQ) regulations implementing NEPA (40 CFR parts 1500 et seq.), and FRA's Procedures for Considering Environmental Impacts (64 FR 28545, May 26, 1999). The Bureau of Land Management (BLM), Surface Transportation Board (STB), Federal Highway Administration (FHWA), and the National Park Service (NPS) coordinated with the FRA as Cooperating Agencies for the DesertXpress project environmental review process. DesertXpress Enterprises Inc., the DesertXpress project proponent or Applicant, proposes to construct and operate a fully grade- separated, dedicated double-track, passenger-only railroad along an approximately 200-mile corridor, from Victorville, California, to Las Vegas, Nevada. The Preferred Alternative rail alignment would generally be immediately adjacent to the Interstate 15 (I-15) freeway travel lanes within the existing Interstate 15 (I-15) right-of-way (ROW). The Preferred Alternative also includes passenger station and maintenance facility sites in Victorville and greater Las Vegas.
Uniform Criteria for State Observational Surveys of Seat Belt Use
This Final Rule amends the regulation establishing uniform criteria for designing and conducting State seat belt use observational surveys and the procedures for obtaining NHTSA approval of survey designs, and provides a new form for reporting seat belt use rates to NHTSA. Since the adoption of the Uniform Criteria in 1998, NHTSA and the States have accumulated substantial experience in the design and implementation of seat belt use surveys. This experience has provided insight into factors that could affect survey accuracy and reliability. In addition, technological improvements in road inventories have made it possible to select observation sites that are more representative of the road segments in the State in a more cost effective manner. For these reasons, NHTSA is revising the Uniform Criteria so that future surveys will give States more accurate data to guide their occupant protection programs.
Establishment of Class E Airspace; Kahului, HI
This action will establish Class E airspace at Kahului Airport, Kahului, HI, to accommodate aircraft using Area Navigation (RNAV) standard instrument approach procedures at Kahului Airport. This will improve the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Amendment of Class E Airspace; West Yellowstone, MT
This action will modify Class E airspace at Yellowstone Airport, West Yellowstone, MT, to accommodate aircraft using Instrument Landing System (ILS) Localizer (LOC) standard instrument approach procedures at Yellowstone Airport. This will improve the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Special Conditions: Turbomeca Arriel 2D Turboshaft Engine
This action proposes special conditions for Turbomeca SA model Arriel 2D engines. The engine model will have a novel or unusual design feature which is a 30-minute power rating. This rating is generally intended to be used for hovering at increased power for search and rescue missions. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the added safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; Piper Aircraft, Inc. (Type Certificate Previously Held by The New Piper Aircraft, Inc.) Models PA-46-310P, PA-46-350P, and PA-46R-350T Airplanes
We are superseding an existing airworthiness directive (AD) that applies to certain Piper Aircraft, Inc. Models PA-46-310P and PA- 46-350P airplanes that are equipped with a Lewis or Transicoil turbine inlet temperature (T.I.T.) gauge and associated probe. That AD currently requires cleaning, inspecting, and calibrating the T.I.T. system; replacing any T.I.T. system that fails the calibration test; repetitively replacing the T.I.T. probe on certain airplanes; and inserting a copy of the AD into the pilot's operating handbook (POH) for certain airplanes. This new AD retains the actions required by the previous AD (AD 99-15-04 R1), adds certain Model PA-46R-350T airplanes to the Applicability section, expands the applicability to include other T.I.T. systems, and incorporates new service information. This AD was prompted by the manufacturer revising related service information and adding an airplane model to the list of affected airplanes. We are issuing this AD to prevent improper engine operation caused by improperly calibrated T.I.T. indicators or defective T.I.T. probes, which could result in engine damage/failure with consequent loss of control of the airplane.
Proposed Agency Information Collection Activities; Comment Request
In accordance with the Paperwork Reduction Act of 1995 and its implementing regulations, the Federal Railroad Administration (FRA) hereby announces that it is seeking renewal of the following currently approved information collection activities. Before submitting these information collection requirements for clearance by the Office of Management and Budget (OMB), FRA is soliciting public comment on specific aspects of the activities identified below.
Airworthiness Directives; Dassault Aviation Model Mystere-Falcon 50 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A340-200 and -300 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Fokker Services B.V. Model F.28 Mark 1000, 2000, 3000, and 4000 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; The Boeing Company Model DC-9-14, DC-9-15, and DC-9-15F Airplanes; and DC-9-20, DC-9-30, DC-9-40, and DC-9-50 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires installing new in-line fuses for the fuel level float switch and new in-line fuses for the pressure switch, as applicable, and changing the wiring. The proposed actions would affect the left and right wing forward spars, center wing forward spar, forward auxiliary fuel tank, and aft auxiliary fuel tank, as applicable. This AD was prompted by fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
Airworthiness Directives; Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Sicma Aero Seat 9140, 9166, 9173, 9174, 9184, 9188, 9196, 91B7, 91B8, 91C0, 91C2, 91C4, 91C5, and 9301 Series Passenger Seat Assemblies; and Sicma Aero Seat 9501311-05, 9501301-06, 9501311-15, 9501301-16, 9501441-30, 9501441-33, 9501311-55, 9501301-56, 9501441-83, 9501441-95, 9501311-97, and 9501301-98 Passenger Seat Assemblies; Installed on Various Transport Category Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
