Department of Transportation November 23, 2010 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Various Models MU-2B Airplanes
The FAA is correcting an airworthiness directive (AD) that has published in the Federal Register. That AD applies to the products listed above. The reissue date of September 24, 1986, of the MU-2B-60 airplane flight manual (AFM) in table 3 of the Compliance section (e)(1)(i) is incorrect, in that it is ``September 24, 1985,'' instead of ``September 24, 1986.'' This document corrects this error. In all other respects, the original document remains the same.
Airworthiness Directives; Pratt & Whitney PW4000 Series Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires a one-time visual inspection of the No. 3 bearing oil pressure tube, part number (P/N) 51J041-01, P/N 50J604-01, or P/N 50J924-01. Tubes that are found cracked or repaired must be removed from service. This AD also prohibits repaired tubes from being installed. This AD results from one report of a repaired No. 3 bearing oil tube that caused an engine in-flight shutdown, seven reports of repaired No. 3 bearing oil pressure tubes found cracked that led to unscheduled engine removals, and one report of a test cell event from a repaired tube that cracked. We are issuing this AD to prevent cracking of No. 3 bearing oil pressure tubes, which could result in internal oil fire, failure of the high-pressure turbine (HPT) disks, uncontained engine failure, and damage to the airplane.
Airworthiness Directives; International Aero Engines V2500-A1, V2522-A5, V2524-A5, V2525-D5, V2527-A5, V2527E-A5, V2527M-A5, V2528-D5, V2530-A5, and V2533-A5 Turbofan Engines
The FAA proposes to adopt a new airworthiness directive (AD) for International Aero Engines (IAE) V2500-A1, V2522-A5, V2524-A5, V2525-D5, V2527-A5, V2527E-A5, V2527M-A5, V2528-D5, V2530-A5, and V2533-A5 turbofan engines. This proposed AD would require initial and repetitive 360[deg] borescope inspections of high-pressure turbine (HPT) stage 1 blade outer air seal segments for evidence of certain distress conditions. This proposed AD would also require incorporation of improved durability stage 1 blade outer air seal segments at the next exposure to the HPT module subassembly, as terminating action to the repetitive inspections. This proposed AD results from three reports received of HPT case burn-through events, numerous shop reports of loss of stage 1 blade outer air seal segments, and HPT case bulging. We are proposing this AD to prevent HPT case burn-through, uncontrolled under- cowl engine fire, and damage to the airplane.
Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-01, TAE 125-02-99, and TAE 125-02-114 Reciprocating Engines
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier, Inc. Model DHC-8-102, -103, -106, -201, -202, -301, -311, -315, -401, and -402 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Special Conditions: Boeing Model 787-8 Airplane; Lightning Protection of Fuel Tank Structure To Prevent Fuel Tank Vapor Ignition
These special conditions are issued for the Boeing Model 787-8 airplane. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. The Boeing Model 787-8 airplane will incorporate a fuel tank nitrogen generation system (NGS) that actively reduces flammability exposure within the main fuel tanks significantly below that required by the fuel tank flammability regulations. Among other benefits, this significantly reduces the potential for fuel vapor ignition caused by lightning strikes. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
