Department of Transportation July 14, 2009 – Federal Register Recent Federal Regulation Documents
Results 1 - 8 of 8
Qualification of Drivers; Exemption Renewals; Vision
FMCSA previously announced its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 21 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemptions will provide a level of safety that will be equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 7 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Commercial Driver's License (CDL) Standards; Rotel North American Tours, LLC; Amendment of Exemption
FMCSA announces its decision to grant Rotel North American Tours, LLC (Rotel), amendment of its existing exemption that permits 22 named drivers, employed by Rotel and possessing German CDLs, to operate commercial motor vehicles (CMVs) in the U.S. without a CDL issued by one of the States. The Rotel roster of its 22 exempt drivers is amended to permit three new Rotel drivers to be substituted for three drivers no longer employed by Rotel. The new Rotel drivers are subject to all the terms and conditions of the current exemption, including its expiration date of July 30, 2010.
Airworthiness Directives; Boeing Model 747-100B SUD, -200B, -300, -400, and -400D Series Airplanes
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to certain Boeing Model 747-100B SUD, - 200B, -300, -400, and -400D series airplanes. The existing AD currently requires repetitive inspections for cracking in fuselage stringers 8L, 8R, 10L, and 10R at body stations 460, 480, and 500 frame locations; and repair if necessary. This proposed AD would revise the applicability to include an additional airplane, and reduce compliance times for the initial inspection and repetitive intervals for Model 747-400 series airplanes that have been converted to the large cargo freighter configuration. This proposed AD results from findings of cracking in fuselage stringers 8L, 8R, 10L, and 10R at body stations 460, 480, and 500 frame locations. We are proposing this AD to detect and correct fatigue cracking in certain fuselage stringers, which, if left undetected, could result in fuselage skin cracking that reduces the structural integrity of the skin panel, and consequent rapid depressurization of the airplane.
Nondiscrimination in Federally Assisted Railroad Programs; Removal
FRA is removing 49 CFR part 265 because the relevant statutory authority for the regulation found in the Railroad Revitalization and Regulatory Reform Act of 1976 has expired. FRA expects that removal of part 265 will reduce the administrative burden to government and industry, reduce government printing costs, and provide a more concise and useful Title 49, Code of Federal Regulations.
Office of Hazardous Materials Safety; Notice of Application for Special Permits
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR Part 107, Subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
