Department of Transportation June 25, 2009 – Federal Register Recent Federal Regulation Documents

Airworthiness Directives; DORNIER LUFTFAHRT GmbH Models 228-100, 228-101, 228-200, 228-201, and 228-202 Airplanes
Document Number: E9-14994
Type: Proposed Rule
Date: 2009-06-25
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 777 Series Airplanes
Document Number: E9-14991
Type: Proposed Rule
Date: 2009-06-25
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Boeing Model 777 series airplanes. This proposed AD would require inspections for scribe lines in the skin along lap joints, butt joints, certain external doublers, and the large cargo door hinges; and related investigative and corrective actions if necessary. This proposed AD results from reports of scribe lines found at lap joints and butt joints, around external doublers, and at locations where external decals had been cut. We are proposing this AD to detect and correct scribe lines, which can develop into fatigue cracks in the skin. Undetected fatigue cracks can grow and cause sudden decompression of the airplane.
Approval of Noise Compatibility Program 14 CFR Part 150; General Mitchell International Airport, Milwaukee, WI
Document Number: E9-14988
Type: Notice
Date: 2009-06-25
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces its findings on the noise compatibility program (NCP) submitted by General Mitchell International Airport under the provisions of 49 U.S.C. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 CFR Part 150. These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1980). The General Mitchell International Airport noise exposure maps were determined by FAA to be in compliance with applicable requirements on December 24, 2008. Notice of this determination was published in the Federal Register on January 15, 2009, Federal Register volume 74, number 10, page 2645.
Eighth Plenary Meeting, NextGen Mid-Term Implementation Task Force
Document Number: E9-14987
Type: Notice
Date: 2009-06-25
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of the NextGen Mid-Term Implementation Task Force.
Approval of Noise Compatibility Program 14 CFR Part 150; Detroit Metropolitan Wayne County Airport, Detroit, MI
Document Number: E9-14986
Type: Notice
Date: 2009-06-25
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces its findings on the noise compatibility program (NCP) submitted by Wayne County Airport Authority under the provisions of 49 U.S.C. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 CFR part 150. These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1980). The Detroit Metropolitan Wayne County Airport noise exposure maps were determined by FAA to be in compliance with applicable requirements on March 7, 2006. Notice of this determination was published in the Federal Register on March 21, 2006, Federal Register volume 71, number 54, page 14282.
Medical Review Board (MRB) Public Meeting
Document Number: E9-14917
Type: Notice
Date: 2009-06-25
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA notes two corrections on the Federal Register notice announcing the Medical Review Board meeting scheduled for July 1, 2009 from 9 a.m.-4:20 p.m. at the U.S. Department of Transportation.
Clean Truck Coalition, LLC, et al.-Pooling Application
Document Number: E9-14892
Type: Notice
Date: 2009-06-25
Agency: Surface Transportation Board, Department of Transportation
By application filed on June 3, 2009, certain participating motor carriers (Applicants) in the Clean Truck Coalition, LLC (CTC), a California limited liability corporation, jointly request approval of a pooling agreement under 49 U.S.C. 14302 and 49 CFR 1184.1, et seq. Applicants propose to pool and/or divide specialized clean truck equipment and corresponding traffic, as necessary, and to use collective purchasing options through a central buying mechanism for fuel, equipment, and materials to manage operations costs. As a result of the agreement, Applicants would be part of the Clean Trucks Program (program), an environmental program aimed at reducing air pollution caused by the trucks used to transport cargo to and from the harbor facilities of the Ports of Los Angeles and Long Beach, CA (the Ports). The program is sponsored through the San Pedro Bay Ports Clean Air Action Plan (the Plan),\1\ and provides grants and financial incentives that allow selected trucking companies to replace older, high-polluting trucks with newer, cleaner trucks. The Plan defines the relevant market as shipments transported to and from the Ports using clean trucks. The outbound deliveries generally would be to designated rail and truck container yards, nearby distribution facilities, and other regional service points. Inbound shipments would represent traffic moving in the reverse direction. Applicants would continue to conduct their own transportation operations serving the Ports and augment their present service from a separate to a joint regionalized service.
Airworthiness Directives; Pratt & Whitney (PW) JT9D-7 Series Turbofan Engines; Correction
Document Number: E9-14810
Type: Rule
Date: 2009-06-25
Agency: Federal Aviation Administration, Department of Transportation
The FAA is correcting airworthiness directive (AD) 2009-04-18, which was previously published in the Federal Register. That AD applies to PW models JT9D-7, -7A, -7AH, -7H, -7F, and -7J turbofan engines. The two references to the engine manual in paragraph (h) and in Table 1, are incomplete. This document corrects those references. In all other respects, the original document remains the same.
Buy America Requirements; Bi-Metallic Composite Conducting Rail
Document Number: E9-14703
Type: Rule
Date: 2009-06-25
Agency: Federal Transit Administration, Department of Transportation
Following the two recent Buy America rulemakings pursuant to the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU), the Federal Transit Administration (FTA) received a petition for reconsideration of the treatment of bi-metallic composite conducting rail as a steel product that must be manufactured in the United States.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.