Department of Transportation May 13, 2009 – Federal Register Recent Federal Regulation Documents

Motor Carrier Safety Advisory Committee Public Meeting
Document Number: E9-11177
Type: Notice
Date: 2009-05-13
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA announces an amendment to its May 5, 2009, notice regarding the May meeting of the Motor Carrier Safety Advisory Committee (MCSAC). The public session scheduled for May 18, from 10 a.m.-11 a.m. will be combined with the public session scheduled on May 20 from 1 p.m. to 4 p.m.
Reports, Forms and Recordkeeping Requirements; Agency Information Collection Activity Under OMB Review
Document Number: E9-11147
Type: Notice
Date: 2009-05-13
Agency: National Highway Traffic Safety Administration, Department of Transportation
Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections.
Requested Administrative Waiver of the Coastwise Trade Laws
Document Number: E9-11146
Type: Notice
Date: 2009-05-13
Agency: Maritime Administration, Department of Transportation
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2009-0047 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the
Requested Administrative Waiver of the Coastwise Trade Laws
Document Number: E9-11145
Type: Notice
Date: 2009-05-13
Agency: Maritime Administration, Department of Transportation
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2009-0045 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the
Notice and Request for Comments
Document Number: E9-11143
Type: Notice
Date: 2009-05-13
Agency: Department of Transportation, Federal Railroad Administration
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Requirements (ICRs) abstracted below have been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICRs describe the nature of the information collections and their expected burdens. The Federal Register notice with a 60-day comment period soliciting comments on the following collections of information was published on March 3, 2009 (74 FR 9331).
Notice of Request for Extension of a Currently Approved Information Collection
Document Number: E9-11142
Type: Notice
Date: 2009-05-13
Agency: Federal Transit Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to approve the extension of the currently approved information collection: Tribal Transit Program.
Notice of Request for Information Collection
Document Number: E9-11141
Type: Notice
Date: 2009-05-13
Agency: Federal Transit Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to approve a new information collection:
Notice of Final Federal Agency Actions on Proposed Highway in California
Document Number: E9-11133
Type: Notice
Date: 2009-05-13
Agency: Federal Highway Administration, Department of Transportation
The FHWA, on behalf of Caltrans, is issuing this notice to announce actions taken by Caltrans and other Federal agencies that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to a proposed Avenue 416 Widening Project in the County of Tulare and County of Fresno, State of California. Those actions grant approvals for the project.
Airworthiness Directives; Cessna Aircraft Company 150 and 152 Series Airplanes
Document Number: E9-11029
Type: Rule
Date: 2009-05-13
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for Cessna Aircraft Company (Cessna) 150 and 152 series airplanes. This AD requires you to either install a placard prohibiting spins and other acrobatic maneuvers in the airplane or to replace the rudder stop, rudder stop bumper, and attachment hardware with a new rudder stop modification kit and replace the safety wire with jamnuts. This AD results from follow-on investigations of two accidents where the rudder was found in the over-travel position with the stop plate hooked over the stop bolt heads. While neither of the accident aircraft met type design, investigations revealed that aircraft in full conformity with type design can exceed the travel limits set by the rudder stops. We are issuing this AD to prevent the rudder from traveling past the normal travel limit. Operation in this non-certificated control position is unacceptable and could cause undesirable consequences, such as contact between the rudder and the elevator.
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 and 440) Airplanes
Document Number: E9-11025
Type: Rule
Date: 2009-05-13
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Pratt & Whitney Models PW2037, PW2037(M), and PW2040 Turbofan Engines
Document Number: E9-10953
Type: Rule
Date: 2009-05-13
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for Pratt & Whitney models PW2037, PW2037(M), and PW2040 turbofan engines with high-pressure turbine (HPT) 2nd stage hubs that have previously been exposed to Pratt & Whitney cleaning procedure SPOP 10 or SPOP 9 or equivalent procedure. This AD requires a onetime optical comparator inspection (OCI) of the blade retention slots of the affected HPT 2nd stage hubs at the next HPT overhaul after the effective date of the AD. This AD results from an uncontained release of HPT 2nd stage blades and blade retention lugs. We are issuing this AD to remove nonconforming HPT 2nd stage hubs, which could result in an uncontained release of turbine blades and blade retention lugs, and damage to the airplane.
Airworthiness Directives; Boeing Model 747-400 and 747-400D Series Airplanes
Document Number: E9-10935
Type: Rule
Date: 2009-05-13
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Boeing Model 747-400 and 747-400D series airplanes. This AD requires repetitive inspections to detect cracks in the floor panel attachment fastener holes of the Section 41 upper deck floor beam upper chords, and related investigative and corrective actions if necessary. This AD results from reports of cracks found in the Section 41 upper deck floor beam upper chords. We are issuing this AD to detect and correct cracks in these chords, which could become large and cause the floor beams to become severed and result in rapid decompression or reduced controllability of the airplane.
Airworthiness Directives; Airbus Model A380-841, -842, and -861 Airplanes
Document Number: E9-10934
Type: Rule
Date: 2009-05-13
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 40 and DA 40 F Airplanes
Document Number: E9-10652
Type: Rule
Date: 2009-05-13
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above to supersede an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.