Department of Transportation November 28, 2007 – Federal Register Recent Federal Regulation Documents
Results 1 - 16 of 16
Airworthiness Directives; Boeing Model 777 Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 777 airplanes. This proposed AD would require installing software upgrades to the airplane information management system (AIMS) located in the flight compartment. This proposed AD results from an investigation that revealed that detrimental effects could occur on certain AIMS software during flight. We are proposing this AD to prevent an unannunciated loss of cabin pressure. If an undetected loss of pressure event were to cause an unsafe pressure in the cabin, the flight crew could become incapacitated.
Reports, Forms, and Recordkeeping Requirements Agency
Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections. This document describes one collection of information for which NHTSA intends to seek OMB approval.
Solicitation of Applications for FY 2008, Commercial Motor Vehicle (CMV) Operator Safety Training Grant Opportunity
FMCSA announces that it has published an opportunity to apply for FY 2008 funding for the CMV Operator Safety Training Grant on the grants.gov Web site (https://www.grants.gov). This opportunity was established by Section 4134 of the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU, Pub. L. 109-59). This legislation requires grant recipients to train current and future drivers in the safe operation of CMVs, as defined in Section 31301 of Title 49, United States Code. Funding priority will be given to regional or multi-state educational or nonprofit associations serving economically distressed regions of the United States. Eligible awardees can also include State governments, local governments, and accredited post-secondary educational institutions (public or private) such as colleges, universities, vocational-technical schools and truck driver training schools. To apply for funding, applicants must first be registered with grants.gov at the following link: https:// www.grants.gov/applicants/getregistered.jsp. Note that grants.gov registration takes three to five business days to process your information before you can apply. Applications for grant funding must be submitted electronically to the FMCSA through the grants.gov Web site following the instructions provided on the site. The Catalog of Federal Domestic Assistance (CFDA) number for the CMV Safety Training Grant Opportunity 20.235.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to exempt 27 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs). The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the prescribed vision standard. The Agency has concluded that granting these exemptions will provide a level of safety that is equivalent to, or greater than, the level of safety maintained without the exemptions for these CMV drivers.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces receipt of applications from 28 individuals for exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations. If granted, the exemptions would enable these individuals to qualify as drivers of commercial motor vehicles (CMVs) in interstate commerce without meeting the Federal vision standard.
Qualification of Drivers; Exemption Renewals; Vision
FMCSA previously announced its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 19 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has reviewed the comments submitted in response to the previous announcement and concluded that granting these exemptions will provide a level of safety that will be equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Agency Information Collection Activities; Revision of an Approved Information Collection: Motor Carrier Safety Assistance Program
In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for review and approval. This information collection consists of grant application preparation, quarterly reports and electronic data documenting the results of driver/vehicle inspections performed by the States. On September 21, 2007, FMCSA published a Federal Register notice allowing for a 60-day comment period on the ICR. One comment was received.
Standard Instrument Approach Procedures; Miscellaneous Amendments
This rule amends Standard Instrument Approach Procedures (SIAPs) for operations at certain airports. These regulatory actions are needed because of changes in the National Airspace System, such as the commissioning of new navigational facilities, adding of new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; General Electric Company (GE) CF6-80C2B1 Turbofan Engine
The FAA is adopting a new airworthiness directive (AD) for a GE CF6-80C2B1 turbofan engine, serial number (SN) 690203, with fan disk, part number (P/N) 1703M78P11, SN RPMDA662, installed. This AD requires stripping of thermal spray coating, inspection of dovetail slots, and reapplication of thermal spray coating on certain stage 1 fan disks. This AD results from a report that a repair shop did not meet the process requirements when applying copper-nickel-indium (Cu- Ni-In) thermal coating to certain stage 1 fan disks. We are issuing this AD to prevent possible uncontained release of multiple fan blades, resulting in damage to the airplane.
Airworthiness Directives; Boeing Model 767 Airplanes
The FAA is superseding an existing airworthiness directive (AD) that applies to all Boeing Model 767 airplanes. That AD currently requires repetitive measurements of the rudder and elevator freeplay, repetitive lubrications of rudder and elevator components, and related investigative/corrective actions if necessary. This new AD instead requires revised repetitive measurements of the rudder freeplay and the elevator freeplay for each of the power control actuators (PCAs) that move the rudder and elevator, corrective and related investigative actions if necessary, and repetitive lubrications of the rudder and elevator components. For some airplanes, this AD also requires related concurrent actions. This AD results from reports of freeplay-induced vibration of the rudder and the elevator. The potential for vibration of the control surface should be avoided because the point of transition from vibration to divergent flutter is unknown. We are issuing this AD to prevent excessive vibration of the airframe during flight, which could result in loss of control of the airplane.
Airworthiness Directives; Societe de Motorisations Aeronautiques (SMA) SR305-230 and SR305-230-1 Reciprocating Engines
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) provided by the European Aviation Safety Agency (EASA) to identify and correct an unsafe condition on SMA SR305-230 and SR305-230-1 reciprocating engines. The MCAI states the following:
Airworthiness Directives; Rolls-Royce Corporation AE 3007A and AE 3007C Series Turbofan Engines
The FAA is superseding an existing airworthiness directive (AD) for Rolls-Royce Corporation (RRC) AE 3007A and AE 3007C series turbofan engines. That AD currently prohibits any flight following a ground engine start where the engine oil temperature is below 32 [deg]F (0 [deg]C), unless certain preflight operational procedures are followed. This AD also requires those actions and would also require a terminating action. This AD results from design improvements to components in the accessory gearbox air turbine starter mounting pad. We are issuing this AD to prevent an in-flight engine shutdown due to loss of engine oil from the engine accessory gearbox starter pad shaft seal drain and possible loss of the airplane.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135ER, -135KE, -135KL, and -135LR Airplanes and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Hawker Beechcraft Model 400A Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Hawker Beechcraft Model 400A series airplanes. This AD requires inspecting the galley cabinets to determine if a certain part number is installed or if a certain size of wire already exists, and doing related investigative/corrective actions if necessary. This AD results from reports of undersized, and consequently unprotected, wire in the galley cabinets. We are issuing this AD to prevent overheating of wire insulation and consequent fire or smoke in the airplane cabin.
Environmental Impact Statement: Sitka Rocky Gutierrez Airport, Sitka, AK
The Federal Aviation Administration announces that it will be including the assessment of the transfer of lands from federal to state ownership for aviation uses within the Environmental Impact Statement (EIS) currently being prepared by the Federal Aviation Administration. Public and Agency Scoping comments are being sought by the Federal Aviation Administration to receive input regarding the assessment of this additional proposed project within the EIS. Responsible Official: Patricia A. Sullivan, Environmental Protection Specialist, Federal Aviation Administration, Alaskan Region, Airports Division, 222 W. 7th Avenue, 14, Anchorage, AK 99513- 7587, Telephone (907) 271-5454.
Agency Information Collection Activity Seeking OMB Approval
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on August 15, 2007, vol. 72, no. 157, page 45862-45863. Feedback from this survey is used in the prevention of runway collisions and in the Department of the severity and frequency of runway incursions.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
