Department of Transportation October 3, 2007 – Federal Register Recent Federal Regulation Documents
Results 1 - 6 of 6
Quarterly Rail Cost Adjustment Factor
The Board has approved the fourth quarter 2007 rail cost adjustment factor (RCAF) and cost index filed by the Association of American Railroads. The fourth quarter 2007 RCAF (Unadjusted) is 1.280. The fourth quarter 2007 RCAF (Adjusted) is 0.595. The fourth quarter 2007 RCAF-5 is 0.565.
Standard Instrument Approach Procedures; Miscellaneous Amendments
This rule amends Standard Instrument Approach Procedures (SIAPs) for operations at certain airports. These regulatory actions are needed because of changes in the National Airspace System, such as the commissioning of new navigational facilities, adding of new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Airbus Model A318-111 and A318-112 Airplanes and Model A319, A320, and A321 Airplanes
The FAA is superseding two existing airworthiness directives (ADs). One AD applies to all Airbus Model A319 and A320 airplanes and currently requires repetitive ultrasonic inspections to detect fatigue cracking in the wing/fuselage joint cruciform fittings, and corrective actions if necessary. The other AD applies to all Airbus Model A319, A320, and A321 airplanes and currently requires a revision to the Airworthiness Limitations section (ALS) of the Instructions for Continued Airworthiness (ICA). This new AD requires new revisions to the ALS of the ICA to incorporate service life limits for certain items and inspections to detect fatigue cracking, accidental damage, or corrosion in certain structures; and accomplishment of the repetitive ultrasonic inspections of the wing/fuselage joint cruciform fittings in accordance with the revised ALS of the ICA. This AD also adds airplanes to the applicability. This AD results from issuance of new and more restrictive service life limits and structural inspections based on fatigue testing and in-service findings. We are issuing this AD to detect and correct fatigue cracking, accidental damage, or corrosion in principal structural elements and to prevent failure of certain life limited parts, which could result in reduced structural integrity of the airplane.
Airworthiness Directives; Airbus Model A300 Airplanes and Model A310 Airplanes
The FAA is superseding an existing airworthiness directive (AD) that applies to all Airbus Model A300 and A310 airplanes, and certain Model A300-600 series airplanes. That AD currently requires an inspection of the wing and center fuel tanks to determine if certain P- clips are installed and corrective action if necessary. That AD also requires an inspection of electrical bonding points of certain equipment in the center fuel tank for the presence of a blue coat and related investigative and corrective actions if necessary. That AD also requires installation of new bonding leads and electrical bonding points on certain equipment in the wing, center, and trim fuel tanks, as necessary. This new AD requires, for certain airplanes, installation of bonding on an additional bracket and modification of the fuel/defuel valves on the left-hand wing. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to ensure continuous electrical bonding protection of equipment in the wing, center, and trim fuel tanks and to prevent damage to wiring in the wing and center fuel tanks, due to failed P-clips used for retaining the wiring and pipes, which could result in a possible fuel ignition source in the fuel tanks.
Airworthiness Directives; Saab Model SAAB 2000 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Hawker Beechcraft Corporation (Type Certificate No. A00010WI Previously Held by Raytheon Aircraft Company) Model 390 Airplanes
We are adopting a new airworthiness directive (AD) for certain Hawker Beechcraft Corporation Model 390 airplanes. This AD requires you to inspect the starter-generator to determine the serial number (S/N) and suffix letter, which indicates if the part is improperly shimmed. This AD also requires you to replace any improperly shimmed starter- generator with a properly shimmed starter-generator. This AD results from reports of a manufacturing error where certain starter-generators may have been improperly shimmed. We are issuing this AD to detect and correct improperly shimmed starter-generators, which could result in premature starter-generator failure. This failure could lead to increased chances of dual starter-generator failure on the same flight.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
