Department of Transportation April 24, 2007 – Federal Register Recent Federal Regulation Documents

Notice of Final Federal Agency Actions on Proposed Highways in Washington
Document Number: E7-7829
Type: Notice
Date: 2007-04-24
Agency: Federal Highway Administration, Department of Transportation
This notice announces actions taken by the FHWA and other Federal agencies that are final within the meaning of 23 U.S.C. 139(l)(1)-(2). The actions relate to a proposed highway project, Yakima Grade Separation: Lincoln Avenue and B Street project, in Yakima County in the State of Washington. Those actions grant licenses, permits, and approvals for the project.
Airworthiness Directives; SOCATA-Groupe AEROSPATIALE Model TB 9, TB 10, and TB 200 Airplanes
Document Number: E7-7756
Type: Proposed Rule
Date: 2007-04-24
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Agency Information Collection; Activity Under OMB Review; Omnibus Household Survey Program
Document Number: E7-7755
Type: Notice
Date: 2007-04-24
Agency: Research and Innovative Technology Administration, Department of Transportation
In accordance with the requirements of section 3506(c)(2)(A) of the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Request (ICR) described below is being forwarded to the Office of Management and Budget (OMB) for approval for a new information collection related to the use of and satisfaction with the nation's transportation system. The ICR describes the nature of the information collection and its expected burden. The Federal Register notice with a 60-day comment period soliciting comments on the following collection of information was published on February 12, 2007 (72 FR 6665) and the comment period ended on April 14, 2007. The 60-day notice produced no comments.
Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A. Model P-180 Airplanes
Document Number: E7-7754
Type: Proposed Rule
Date: 2007-04-24
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes
Document Number: E7-7752
Type: Proposed Rule
Date: 2007-04-24
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Avions Marcel Dassault-Breguet Model Falcon 10 Airplanes
Document Number: E7-7741
Type: Proposed Rule
Date: 2007-04-24
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all Dassault Model Falcon 10 series airplanes. The existing AD currently requires revising the airplane flight manual (AFM) and installing a placard in the flight deck to prohibit flight into known or forecasted icing conditions. In lieu of the AFM revision and placard installation, that AD allows identifying the part number of each flexible hose in the wing (slat) anti-icing system, performing repetitive inspections of each hose for delamination, and performing corrective actions if necessary. That AD allows the following actions (also in lieu of the AFM revision and placard installation): new repetitive inspections for delamination at reduced intervals, corrective actions if necessary, and an additional AFM revision to include a statement to track flight cycles when the slat anti-icing system is activated. That AD also provides optional terminating action for the repetitive inspection requirements. This proposed AD would mandate the previously optional terminating action. This proposed AD results from a report of in-service delamination of a flexible hose in the slat anti-icing system at a time earlier than previously reported. We are proposing this AD to prevent collapse of the flexible hoses in the slat anti-icing system, which could lead to insufficient anti-icing capability and, if icing is encountered in this situation, could result in reduced controllability of the airplane.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-145XR Airplanes
Document Number: E7-7736
Type: Proposed Rule
Date: 2007-04-24
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A300 Series Airplanes; Model A300-600 Series Airplanes; and Model A310 Series Airplanes
Document Number: E7-7733
Type: Proposed Rule
Date: 2007-04-24
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Petition for Exemption From the Vehicle Theft Prevention Standard; Ford
Document Number: E7-7719
Type: Notice
Date: 2007-04-24
Agency: National Highway Traffic Safety Administration, Department of Transportation
This document grants in full the petition of Ford Motor Company (Ford) in accordance with Sec. 543.9(c)(2) of 49 CFR part 543, Exemption from the Theft Prevention Standard, for the Ford Taurus X (formerly the Ford Freestyle) vehicle line beginning with model year (MY) 2008. This petition is granted because the agency has determined that the antitheft device to be placed on the line as standard equipment is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of the Theft Prevention Standard.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.