Department of Transportation March 7, 2007 – Federal Register Recent Federal Regulation Documents

We are revising an earlier NPRM for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A330 airplanes and Model A340-200 and -300 series airplanes. This AD requires inspecting to determine the part number of certain S4- and MZ-type spoiler servo controls (SSCs). For certain other airplanes, this AD requires inspecting to determine the part number of all SSCs. This AD also requires replacing any affected SSC with a new SSC. This AD results from a new load duty cycle defined by the manufacturer. Additional fatigue tests and calculations done on this basis indicated that the spoiler valve manifold of the S4-type SSCs, and, on certain airplanes, the maintenance cover of the MZ-type SSCs, may crack during its service life due to pressure impulse fatigue. We are issuing this AD to prevent fatigue cracking of certain SSCs, which could result in hydraulic leakage and consequent loss of SSC function and loss of the associated hydraulic system. These conditions could affect all three hydraulic systems, which could result in reduced controllability of the airplane.

The FAA adopts a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) Models 172R, 172S, 182S, 182T, T182T, 206H, and T206H airplanes. This AD requires you to install Modification Kit MK172-25-10C or a steel lock rod/bar on both crew seat back cylinder lock assemblies. If a steel lock rod/bar has already been installed on the crew seat back cylinder lock assembly, no further action is required. If you have already installed Modification Kit MK172-25-10A or MK172-25-10B, this AD requires you to do an installation inspection and correct any discrepancies found. This AD results from reports of the crew seat back cylinder lock assembly failing at the aft end and other cylinder lock assemblies found cracked. We are issuing this AD to prevent the crew seat back cylinder lock assembly from bending, cracking, or failing. This failure could cause uncontrolled movement of the seat back, resulting in possible backward collapse during flight. Backward collapse of either crew seat back could result in an abrupt pitch-up if the affected crew member continues to hold on to the control yoke during this failure and could cause difficulty in exiting the airplane from an aft passenger seat after landing.

The FAA's Aviation Safety, an organization responsible for the certification, production approval, and continued airworthiness of aircraft, and certification of pilots, mechanics, and others in safety related positions, publishes proposed non-regulatory documents that are available for public comment on the Internet at https://www.faa.gov/ aircraft/draftdocs/.

The Federal Aviation Administration (FAA) announces May 1, 2007, as the deadline for each airport sponsor to notify the FAA that it will use its fiscal year 2007 entitlement funds to accomplish projects identified in the Airports Capital Improvement Plan that was formulated in the spring of 2006.