Department of Transportation February 27, 2007 – Federal Register Recent Federal Regulation Documents
Results 1 - 14 of 14
Airworthiness Directives; REIMS AVIATION S.A. Model F406 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Surface Transportation Board-2007 Office Relocation Business Plan
The Surface Transportation Board is scheduled to relocate over the period of February 28-March 4, 2007. The Board is giving notice of pre-relocation and post-relocation procedures. The Board's new address will be: Surface Transportation Board, 395 E Street, SW., Washington, DC 20423-0001.
Repair Stations; Extension of Comment Period
This action extends the comment period for the Repair Stations NPRM, Docket No. FAA-2006-26408 that was published on December 1, 2006. In that document, the FAA proposed to amend the regulations for repair stations by revising the system of ratings and requiring repair stations to establish a quality program. The FAA also proposed additional changes critical to maintaining safety. On January 26, 2007, the Aeronautical Repair Station Association (ARSA) requested an extension to the comment period for this NPRM. The FAA has considered this request and decided to extend the comment period for 45 days.
Proposed Advisory Circular 120-XX, Damage Tolerance Inspections for Repairs and Alterations
This notice announces the availability of and requests comments on a proposed advisory circular (AC) which provides guidance to type certificate holders and supplemental type certificate holders for developing damage tolerance data that will support operator compliance with certain airworthiness standards. This proposed AC complements revisions to the airworthiness standards that are being proposed by a separate notice. This notice is necessary to give all interested persons an opportunity to present their views on the proposed AC.
Airworthiness Directives; Fokker Model F.28 Mark 1000, 2000, 3000, and 4000 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Fokker Model F.28 Mark 1000, 2000, 3000, and 4000 airplanes. This AD requires a one-time inspection of the left- and right-hand main landing gear (MLG) downlock actuators or a review of the airplane maintenance records to determine the part number of each downlock actuator installed, and replacement of identified MLG downlock actuators with modified MLG downlock actuators. This AD results from a report of a failed downlock actuator, which resulted in the left MLG collapsing during taxi after landing. We are issuing this AD to prevent failure of the downlock actuator, which could prevent the MLG side stay from locking properly, resulting in collapse of the MLG during ground maneuvers or upon landing.
Airworthiness Directives; Construcciones Aeronauticas, S.A., (CASA) Model C-212 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as follows:
Airworthiness Directives; Alpha Aviation Design Limited R2160 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as a deficiency in compliance with 14 CFR 23.967(d). There have been instances indicating that production aircraft may not have a metal barrier between the cabin and the fuel tank bay. Lack of a barrier could allow flammable fuel vapors to enter the cabin. We are issuing this AD to require actions to correct the unsafe condition on these products.
Airworthiness Directives; Fokker Model F.28 Mark 0070 and 0100 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Fokker Model F.28 Mark 0070 and 0100 airplanes. This AD requires a one- time inspection of the fuel lines located in the left and right main landing gear (MLG) bays to determine the clearance between the fuel and hydraulic lines. If necessary, this AD also requires an inspection of fuel lines for chafing, the replacement of a chafed fuel line with a new fuel line, and the repositioning of existing clamps and installation of additional clamps between the fuel and hydraulic lines. This AD results from a fuel leak found in the left MLG bay. We are issuing this AD to detect and correct inadequate clearance between fuel and hydraulic lines in the MLG bay, which could lead to chafing of a fuel line and fuel leakage. A fuel leak near hot brakes could result in a fire in the MLG bay.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170-100 LR, -100 STD, -100 SE, -100 SU, -200 LR, -200 STD, and -200 SU Airplanes and Model ERJ 190 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain EMBRAER Model ERJ 170-100 LR, -100 STD, -100 SE, -100 SU, -200 LR, -200 STD, and -200 SU airplanes and Model ERJ 190 airplanes. This AD requires inspecting to determine the part number and serial number of the deployment actuator of the ram air turbine (RAT) and related investigative and corrective actions if necessary. This AD results from reports that the RAT may not fully deploy due to galling between the piston rod and gland housing of the RAT deployment actuator. We are issuing this AD to prevent the RAT from failing to deploy, which could result in loss of control of the airplane during in-flight emergencies.
Airworthiness Directives; Fokker Model F.28 Mark 0070 and 0100 Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Fokker Model F.28 Mark 0070 and 0100 airplanes. That AD currently requires a one-time inspection of the sliding members in the main landing gear (MLG) for cracking and replacement of the sliding members with serviceable parts if necessary. This new AD adds repetitive magnetic particle inspections of the sliding members of the MLG for cracking and corrective actions as necessary. This AD results from inspection findings that have shown repetitive inspections are needed to establish fleet safety. We are issuing this AD to detect and correct fatigue cracking of the sliding member, which could result in possible separation of the MLG from the airplane and consequent reduced controllability of the airplane upon landing and possible injury to passengers.
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD requires repetitive inspections of the bolts that attach the exhaust nozzle to the aft engine flange to determine if any bolts are missing or fractured, and replacement of the existing bolts with new, improved bolts. This AD results from reports of the engine exhaust nozzle and fairing departing from the airplane in flight due to missing attachment bolts. We are issuing this AD to detect and correct missing or fractured attachment bolts, which could lead to the loss of an engine exhaust nozzle during flight and consequent structural damage to the airplane and hazard to people or property on the ground. Damage to the airplane could cause the airplane to yaw and result in reduced controllability of the airplane.
Airworthiness Directives; Bombardier Model DHC-8-102, -103, and -106 Airplanes; and Model DHC-8-200 and DHC-8-300 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Model DHC-8-100 (as described above), DHC-8-200, and DHC-8-300 series airplanes. This AD requires doing a one-time inspection for damage of the electrical cable harness assembly located on the left and right wing root-to-fuselage aft seal, and repair if necessary; and reworking the fuselage aft seal assembly (left and right) to create a clearance between the electrical cable assemblies and the edge of the fairing panel. This AD results from a report that an airplane encountered an uncommanded propeller feathering during climb, which resulted in an emergency landing. We are issuing this AD to prevent chafing or grounding of the wiring against the aft seal assemblies, which, if not corrected, could interrupt the operation of various systems, including the propeller feather control, alternating current (AC) electrical power, and standby hydraulic power, and result in reduced controllability of the airplane.
Airworthiness Directives; Airbus Model A300 B2 and B4 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to all Airbus Model A300 B2, B4-100, and B4-200 series airplanes. That AD currently requires supplemental structural inspections to detect fatigue cracking, and repair of cracked structure. This new AD requires revising the maintenance program by incorporating new and revised supplemental structural inspections, inspection intervals, and repairs; and repair of any damaged, cracked, or corroded structure; which would end the existing supplement structural inspections. This AD results from a review of service history and reports received from the current supplemental structural inspection document program. We are issuing this AD to prevent reduced structural integrity of these airplanes due to fatigue cracking.
Corporate Average Fuel Economy-Request for Product Plan Information for Model Year 2007-2017 Passenger Cars and 2010-2017 Light Trucks
The purpose of this request for comments is to acquire new and updated information regarding vehicle manufacturers' future product plans to aid in implementing the President's plan for reforming and increasing corporate average fuel economy (CAFE) standards for passenger cars and further increasing the already reformed light truck standards. Under this plan, the President set a goal of reducing the annual gasoline use in 2017 by up to 8.5 billion gallons. More specifically, we are seeking information related to fuel economy improvements for MY 2007-2017 passenger cars and MY 2010-2017 light trucks. The agency is seeking information in anticipation of obtaining statutory authority to reform the passenger car CAFE program and to set standards under that structure for MY 2010-2017 passenger cars. The agency is also seeking this information in anticipation of setting standards for MY 2012-2017 light trucks. This information will help the agency in assessing, in greater detail, the potential levels of future standards under a reformed structure, and the impact of those standards on gasoline consumption, manufacturers, consumers, the economy, and motor vehicle safety.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
