Department of Transportation March 31, 2006 – Federal Register Recent Federal Regulation Documents
Results 1 - 23 of 23
Petitions for Exemption; Summary of Petitions Received
Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption part 11 of Title 14, Code of Federal Regulations (14 CFR), this notice contains a summary of certain petitions seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Reports, Forms, and Recordkeeping Requirements; Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on January 10, 2006 (71 FR 1583).
Executive Committee of the Aviation Rulemaking Advisory Committee; Meeting
The FAA is issuing this notice to advise the public of a meeting of the Executive Committee of the Aviation Rulemaking Advisory Committee.
Airworthiness Directives; General Electric Company CF6-45 and CF6-50 Series Turbofan Engines
The FAA proposes to adopt a new airworthiness directive (AD) for certain General Electric Company (GE) CF6-45 and CF6-50 series turbofan engines. This proposed AD would require inspecting and reworking certain forward and aft center bodies of the long fixed core exhaust nozzle (LFCEN) assembly. This proposed AD results from reports of separation of LFCEN assembly forward and aft center bodies, due to high imbalance engine conditions during flight. We are proposing this AD to prevent the forward and aft center body of the LFCEN assembly from separating, leading to additional damage to the engine and airplane, possible damage to other airplanes, and to objects on the ground.
Airworthiness Directives; General Electric Company CT7-5, -7, and -9 Series Turboprop Engines
The FAA proposes to supersede an existing airworthiness directive (AD) for General Electric Company (GE) CT7-5A2, -5A3, -7A, - 7A1, -9B, -9B1, and -9B2 turboprop engines, with certain part number (P/N) and serial number stage 2 turbine aft cooling plates installed. That AD currently requires a onetime eddy current inspection (ECI) of boltholes in certain P/N stage 2 turbine aft cooling plates. This proposed AD would expand the population of affected CT7 turboprop engine models, but would reduce the number of cooling plates affected. It would also require a onetime ECI of boltholes in certain P/N stage 2 turbine aft cooling plates. This proposed AD results from the manufacturer identifying the affected stage 2 turbine aft cooling plates by serial number. We are proposing this AD to prevent separation of the stage 2 turbine aft cooling plate, resulting in uncontained engine failure and damage to the airplane.
Notice of Request for Clearance of a New Information Collection: Assessing the Effectiveness of the Arbitration Program as a Means of Settling Household Goods Disputes
In accordance with the Paperwork Reduction Act of 1995, this notice announces FMCSA's plan to submit the Information Collection Request (ICR) abstracted below to the Office of Management and Budget (OMB) for review and approval. The ICR is related to the current arbitration dispute resolution procedures used to settle loss and damage claims by shippers who have contracted with household goods (HHGs) carriers for interstate transport of their household goods shipments. On October 24, 2005, the agency published a Federal Register notice with a 60-day comment period to solicit the public's views on the information collection pertaining to this subject. One comment was received.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 16 individuals. FMCSA has statutory authority to exempt individuals from its vision standards if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemptions will provide a level of safety that is equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Reports, Forms and Record Keeping Requirements; Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on January 4, 2006.
Agency Request for Emergency Processing of Collection of Information by the Office of Management and Budget
In accordance with the Paperwork Reduction Act of 1995 and its implementing regulations, the Federal Railroad Administration (FRA) hereby announces that it is seeking an extension of the following currently approved information collection activities. These information collection activities received a six-month emergency approval from OMB. FRA seeks this extension while it works on developing a proposed rule related to the same topic of railroad operating rules. Before submitting these information collection requirements for clearance by the Office of Management and Budget (OMB), FRA is soliciting public comment on specific aspects of the activities identified below.
Notice Before Waiver With Respect to Land at Raleigh County Memorial Airport, Beckley, WV
The FAA is publishing notice of proposed release of 23.945 acres of land at Raleigh County Memorial Airport, Beckley, West Virginia to the Raleigh County Airport Authority and the Raleigh County Commission for the development of an industrial park. There are no impacts to the Airport and the land is not needed for airport development as shown on the Airport Layout Plan. Fair Market Value of the land will be paid to the Raleigh County Airport and the Raleigh County Commission, and used for Airport purposes.
RTCA Special Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems Airborne Equipment
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems Airborne Equipment.
Experimental Permits for Reusable Suborbital Rockets
The Federal Aviation Administration (FAA) proposes to amend its commercial space transportation regulations under the Commercial Space Launch Amendments Act of 2004. The FAA proposes application requirements for an operator of a reusable suborbital rocket to obtain an experimental permit. The FAA also proposes operating requirements and restrictions on launch and reentry of reusable suborbital rockets operated under a permit.
Reservation System for Unscheduled Arrivals at Chicago's O'Hare International Airport
This action extends the expiration date of Special Federal Aviation Regulation (SFAR) No. 105 through October 28, 2006. This action is necessary to maintain the reservation system established for unscheduled arrivals at O'Hare International Airport while the FAA completes rulemaking associated with scheduled arrivals at the airport.
Operating Limitations at Chicago O'Hare International Airport
On March 13, 2006, the Federal Aviation Administration (FAA) issued an order to show cause, soliciting written views on extending through October 28, 2006, the August 2004 order limiting scheduled operations at O'Hare International Airport (O'Hare). The August 2004 order made effective a series of schedule adjustments that air carriers individually agreed to during a scheduling reduction meeting convened under 49 U.S.C. 41722. The FAA previously extended the order twice, most recently through April 1, 2006. After careful reflection on the written views submitted in this matter, the FAA is now extending the August 2004 order through October 28, 2006, but reserves the right to terminate the August 2004 order before that date if a final rule on congestion and delay reduction at O'Hare earlier takes effect.
Proposed Amendment to Class E Airspace; Kalispell, MT
This action proposes to revise Class E surface airspace at Kalispell, MT. This action is necessary for the safety of Instrument Flight Rules (FR) aircraft executing Instrument Landing System (ILS) approach procedures to the newly extended runway at Kalispell/Glacier Park International Airport, Kalispell, MT.
RTCA Special Committee 205/EUROCAE Working Group 71: Software Considerations in Aeronautical Systems Second Joint Plenary Meeting
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 205/EUROCAE Working Group 71: Software Considerations in Aeronautical Systems.
Notice Before Waiver With Respect To Land at Lynchburg Regional Airport, Lynchburg, VA
The Federal Aviation Administration (FAA) proposes to rule and invites public comment on the release of approximately thirty (30) acres of land at the Lynchburg Regional Airport, Lynchburg, Virginia from all Federal obligations, since the land is no longer needed for airport purposes. Reuse of the land for commercial/light industrial purposes represents a compatible land use. There are no impacts to the Airport and the land is not needed for airport development as shown on the Airport Layout Plan. The proceeds from the disposal of land acquired with Federal grants will be used for land acquisition and construction costs associated with the southerly extension to Runway 4- 22. The proceeds from the disposal of land acquired without Federal grants will be used for Airport operating and capital costs.
Airworthiness Directives; Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD requires a one-time inspection for scribe lines and cracks in the fuselage skin at certain lap joints, butt joints, external repair doublers, and other areas; and related investigative/ corrective actions if necessary. This AD results from reports of fuselage skin cracks adjacent to the skin lap joints on airplanes that had scribe lines. Scribe line damage can also occur at many other locations, including butt joints, external doublers, door scuff plates, the wing-to-body fairing, and areas of the fuselage where decals have been applied or removed. We are issuing this AD to prevent rapid decompression of the airplane due to fatigue cracks resulting from scribe lines on pressurized fuselage structure.
Airworthiness Directives; McDonnell Douglas Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), MD-88, and MD-90-30 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all McDonnell Douglas airplanes identified above. This AD requires a one- time inspection of the aft attach fitting assembly of the spoiler link to determine the part number, and further investigative action and replacement of the assembly with a new or serviceable assembly, if necessary. This AD results from a determination that the holes of certain aft attach fitting assemblies of the spoiler link were not cold-worked during production. We are issuing this AD to prevent fatigue cracking of the aft attach fitting of the spoiler link and consequent failure of the fitting. Failure of the fitting could result in an asymmetrical lift condition and consequent reduced controllability of the airplane.
Airworthiness Directives; Airbus Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A300-600 series airplanes. This AD requires modifying nine bolt holes in the vertical flange to prevent cracking before the inspection threshold of AD 98-18-02. This AD results from reports of cracking in the vertical web of the center spar sealing angles of the wing earlier than the inspection interval specified in the existing AD. We are issuing this AD to prevent crack formation in the sealing angles; such cracks could rupture the sealing angle and lead to subsequent crack formation in the bottom skin of the wing, and resultant reduced structural integrity of the center spar section of the wing.
Airworthiness Directives; Airbus Model A318-100 and A319-100 Series Airplanes; Model A320-111 Airplanes; and Model A320-200, A321-100, and A321-200 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus Model A318-100 and A319-100 series airplanes; Model A320-111 airplanes; and Model A320-200, A321-100, and A321-200 series airplanes. This AD requires repetitive detailed inspections of the trimmable horizontal stabilizer actuator (THSA) attachments for proper clearances, and any crack, damage, or metallic particles; related corrective actions if necessary; and a report of the inspection results to the manufacturer. This AD results from a report that during lab testing to verify the performance of the THSA's secondary load path with a simulated failure of the THSA's primary load path, the secondary load path's nut did not jam (as it was supposed to do). We are issuing this AD to ensure the integrity of the THSA's primary load path, which if failed, could result in latent (undetected) loading and eventual failure of the THSA's secondary load path and consequent uncontrolled movement of the horizontal stabilizer and loss of control of the airplane.
Airworthiness Directives; McDonnell Douglas Model DC-9-10, DC-9-20, DC-9-30, DC-9-40, and DC-9-50 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain McDonnell Douglas Model DC-9-10, DC-9-20, DC-9-30, DC-9-40, and DC-9-50 series airplanes. This AD requires repetitive inspections for stress corrosion cracks of the main fuselage frame, and corrective actions if necessary. This AD also provides an optional terminating action for the repetitive inspections. This AD results from several reports of cracking of the main fuselage frame. We are issuing this AD to detect and correct stress corrosion cracking of the main fuselage frame, which could result in extensive damage to adjacent structure and reduced structural integrity of the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
