Department of Transportation June 24, 2005 – Federal Register Recent Federal Regulation Documents
Results 1 - 36 of 36
Revision of Class E Airspace; Shishmaref, AK
This action revises Class E airspace at Shishmaref, AK to provide adequate controlled airspace to contain aircraft executing two new Standard Instrument Approach Procedures (SIAPs). This Rule results in new Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at Shishmaref, AK.
Establishment of Class E Airspace; Kaltag, AK
This action establishes Class E airspace at Kaltag, AK to provide adequate controlled airspace to contain aircraft executing two new Standard Instrument Approach Procedures (SIAPs) and two new departure procedures. This rule results in new Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at Kaltag, AK.
Revision of Class E Airspace; Emmonak, AK
This action revises Class E airspace at Emmonak, AK to provide adequate controlled airspace to contain aircraft executing amended Standard Instrument Approach Procedures (SIAPs). This rule results in new Class E airspace upward from 700 feet (ft.) above the surface at Emmonak, AK.
Establishment of Class E Airspace; Coldfoot, AK
This action establishes Class E airspace at Coldfoot, AK to provide adequate controlled airspace to contain aircraft executing two new Standard Instrument Approach Procedures (SIAPs) and a new departure procedure. This rule results in new Class E airspace upward from 700 feet (ft.) above the surface at Coldfoot, AK.
Establishment of Class E Airspace; Chalkyitsik, AK
This action establishes Class E airspace at Chalkyitsik, AK to provide adequate controlled airspace to contain aircraft executing two new Standard Instrument Approach Procedures (SIAPs). This rule results in new Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at Chalkyitsik, AK.
Establishment of Class E Airspace; Bob Baker Memorial Airport, Kiana, AK
This action establishes Class E airspace at Bob Baker Memorial Airport, Kiana, AK, to provide adequate controlled airspace to contain aircraft executing two new Standard Instrument Approach Procedures (SIAPs) and a departure procedure. This rule results in new Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at Bob Baker Memorial Airport, Kiana, AK.
Proposed Revision of Class E Airspace; Cordova, AK
This action proposes to revise the Class E airspace at Cordova, AK. New and revised Standard Instrument Approach Procedures (SIAPs) are being published for Cordova, AK. Additional Class E airspace is needed to contain aircraft executing instrument approaches at Merle K. (Mudhole) Smith Airport. Adoption of this proposal would result in additional Class E surface area and Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at Cordova, AK.
Proposed Revision of Class E Airspace; Yakutat, AK
This action proposes to revise the Class E airspace at Yakutat, AK. Three new Standard Instrument Approach Procedures (SIAPs) are being published for Yakutat, AK. Additional Class E airspace is needed to contain aircraft executing instrument approaches at Yakutat Airport. Adoption of this proposal would result in additional Class E airspace upward from 1,200 feet (ft.) above the surface at Yakutat, AK.
Proposed Establishment of Class E Airspace; Golovin, AK
This action proposes to establish new Class E airspace at Golovin, AK. Two new Standard Instrument Approach Procedures (SIAPs) and one departure procedure are being published for the Golovin Airport. There is no existing Class E airspace to contain aircraft executing the new instrument procedures at Golovin, AK. Adoption of this proposal would result in the establishment of Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at Golovin, AK.
Proposed Revision of Class E Airspace; Prospect Creek, AK
This action proposes to revise the Class E airspace at Prospect Creek, AK. An airspace evaluation has concluded that additional airspace is required to fully contain aircraft executing Special Instrument Approaches Procedures at Prospect Creek Airport. Adoption of this proposal would result in the revision of Class E airspace upward from 700 feet (ft.) above the surface at Prospect Creek, AK.
User Input to the Aviation Weather Technology Transfer (AWTT) Board
The FAA will hold an informal public meeting to seek aviation weather user input on icing products. Details: July 13, 2005; Northrop Grumman, Conference Room A, 475 School Street, SW., Washington, DC 20024; 9 a.m. to 5 p.m. The objective of this meeting is to provide an opportunity for interested Government and commercial sector representatives who use government-provided aviation weather information in operational decision-making to provide input on FAA's plans for implementing new icing weather products.
Notice of Intent to Rule on Application 05-03-I-00-GRR to Impose a Passenger Facility Charge (PFC) at Gerald R. Ford International Airport, Grand Rapids, MI.
The FAA proposes to rule and invites public comment on the application to impose a PFC at Gerald R. Ford International Airport under the provisions of the 49 U.S.C. 40117 and part 158 of the Federal Aviation Regulations (14 CFR part 185).
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-21648 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-21647 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-21646 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-21645 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105-383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.- vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-21644 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-21643 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-21642 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-21641 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-21640 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.
First Meeting: RTCA Special Committee 207/Airport Security Access Control Systems
The FAA is issuing this notice to advise the public of a the initial meeting of RTCA Special Committee 207, Airport Security Access Control Systems. The FAA is holding this meeting to provide interested individuals an opportunity to participate.
First Meeting: RTCA Special Committee 206/Aeronautical Information Services (AIS) Data Link
The FAA is issuing this notice to advise the public of the initial meeting of RTCA Special Committee 206/Aeronautical Information Services (AIS) Data Link. The FAA is holding this meeting to provide interested individuals an opportunity to participate.
Agency Information Collection Activity Under OMB review
In accordance with the Paperwork Reduction Act of 1995 (44 U.S.C. 35001 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for extension of the currently approved information collection. The Federal Register Notice with a 60- day comment period soliciting comments was published on March 30, 2005.
Airworthiness Directives; Agusta S.p.A. Model AB412 Series Helicopters
This amendment adopts a new airworthiness directive (AD) for the Agusta S.p.A. (Agusta) Model AB412 Series helicopters. This action requires inspecting each affected tail rotor blade (blade) forward tip weight retention block (tip block) and the aft tip closure (tip closure) for adhesive bond voids, and removing any blade with an excessive void from service. This AD also requires modifying certain blades by installing shear pins and tip closure rivets on all affected blades. This amendment is prompted by reports of in-flight loss of tip blocks and tip closures resulting in minor to substantial damage. The actions specified in this AD are intended to prevent loss of the tip block or tip closure, loss of a blade, and subsequent loss of control of the helicopter.
Airworthiness Directives; Eurocopter France Model EC 155B, EC155B1, SA-365N, SA-365N1, AS-365N2, and AS 365 N3 Helicopters
This amendment supersedes an existing airworthiness directive (AD) for Eurocopter France (Eurocopter) Model EC 155B, SA-365N and N1, AS-365N2, and AS 365 N3 helicopters. That AD currently requires inspecting the hydraulic brake hose (hose) for crazing, pinching, distortion, or leaks at the torque link hinge and replacing the hose, if necessary. That AD also requires inspecting the hose and the emergency flotation gear pipe to ensure adequate clearance, and adjusting the landing gear leg, if necessary. This amendment requires the same actions as the existing AD and adds another model helicopter to the applicability. This amendment is prompted by notification by the manufacturer and the European Authority that another affected model helicopter, the Model EC155B1, may have the same unsafe condition and should be added to the existing AD. The actions specified by this AD are intended to prevent failure of a hose, resulting in failure of hydraulic pressure to the brakes on the affected landing gear wheel, and subsequent loss of control of the helicopter during a run-on landing.
Airworthiness Directives; Turbomeca S.A. Arriel 2B Turboshaft Engines
The FAA is adopting a new airworthiness directive (AD) for Turbomeca S.A. Arriel 2B turboshaft engines with Modification TU62A incorporated. This AD results from several reports of the hydromechanical unit (HMU) acceleration controller axle sticking. This AD requires initial and repetitive inspections, cleaning, lubrication, and checks for proper operation of the HMU acceleration controller axle. We are issuing this AD to prevent loss of control of engine fuel flow in manual control mode or mixed control mode, leading to engine overspeed and in-flight engine shutdown, or uncommanded in-flight engine shutdown.
Airworthiness Directives; Boeing Model 737-200, -200C, -300, -400, -500, -600, -700, -700C, -800, and -900 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 737-200, -200C, -300, -400, -500, -600, -700, - 700C, -800, and -900 series airplanes. This AD requires a one-time detailed inspection for discrepancies of the secondary fuel vapor barrier of the wing center section, and related investigative/ corrective actions if necessary. This AD is prompted by reports that the secondary fuel vapor barrier was not applied correctly to, or was missing from, certain areas of the wing center section. We are issuing this AD to prevent fuel or fuel vapors from leaking into the cargo or passenger compartments and coming into contact with a possible ignition source, which could result in fire or explosion.
Airworthiness Directives; McDonnell Douglas Model MD-90-30 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all McDonnell Douglas Model MD-90-30 airplanes. This AD requires replacing existing dual anti-skid control manifolds (DACM) with new, improved or reworked and reidentified DACMs; inspecting the inlet filters and other components of the DACMs for damage; replacing any damaged DACM components with new or serviceable components; and flushing/cleaning the braking system prior to replacing the inlet filters. This AD is prompted by reports of multiple incidents of blown tires on landing while using maximum autobrake. We are issuing this AD to prevent metallic fibers from the first stage filter of the servo valves inside the DACM from becoming lodged in the first stage nozzle of the servo valve, which could lead to tire failure during high speed/high energy braking and possible subsequent runway departure.
Airworthiness Directives; Airbus Model A319, A320, and A321 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A319, A320, and A321 series airplanes. This AD requires replacing the cargo ventilation extraction duct at frame 65 with a new duct, and relocating the temperature sensor in the aft cargo compartment. This AD is prompted by a report indicating that, during a test of the fire extinguishing system, air leakage around the temperature sensor for the aft cargo compartment reduced the concentration of fire extinguishing agent to below the level required to suppress a fire. We are issuing this AD to prevent air leakage around the temperature sensor for the aft cargo compartment, which, in the event of a fire in the aft cargo compartment, could result in an insufficient concentration of fire extinguishing agent, and consequent inability of the fire extinguishing system to suppress the fire.
Airworthiness Directives; Boeing Model 747-400, -400D, -400F; 767-200, -300, -300F; and 777-200 and -300 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 747-400, -400D, -400F; 767-200, -300, -300F; and 777-200 and -300 series airplanes. This AD requires installing a jumper wire between the wiring of the fire extinguisher switch and the fuel shutoff switch for each engine, and other specified actions. This AD is prompted by a certain combination of conditions, which could cause the fuel spar shutoff valves to remain partially open. We are issuing this AD to prevent a latent open circuit that could leave the fuel spar shutoff valve in a partially open position when the engine fire switch is activated, which could result in fuel from the engine feeding an uncontrolled fire in the engine or the strut.
Airworthiness Directives; Cessna Model 650 Airplanes
This amendment adopts a new airworthiness directive (AD), applicable to all Cessna Model 650 airplanes, that requires inspecting to determine the part number of the actuator control unit (ACU) and replacing the ACU with a new, improved ACU if necessary. This AD also requires revising the Limitations section of the airplane flight manual. The actions specified by this AD are intended to prevent uncommanded movement of the horizontal stabilizer, which could result in reduced controllability of the airplane. This action is intended to address the identified unsafe condition.
Airworthiness Directives; AvCraft Dornier Model 328-100 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all AvCraft Dornier Model 328-100 airplanes. This AD requires modifying the electrical wiring of the fuel pumps; installing insulation at the hand flow control and shut-off valves, and other components of the environmental control system; and installing markings at fuel wiring harnesses. This AD also requires revising the Airworthiness Limitations section of the Instructions for Continued Airworthiness to incorporate new inspections of the fuel tank system. This AD is prompted by the results of fuel system reviews conducted by the airplane manufacturer. We are issuing this AD to reduce the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.