Department of Commerce December 6, 2011 – Federal Register Recent Federal Regulation Documents
Results 1 - 13 of 13
Uncovered Innerspring Units from the People's Republic of China: Preliminary Results and Preliminary Rescission, in Part, of the Antidumping Duty Administrative Review
The Department of Commerce (``Department'') is conducting an administrative review of the antidumping duty order \1\ on uncovered innerspring units (``innersprings'') from the People's Republic of China (``PRC'') for the period of review (``POR'') February 1, 2010, through January 31, 2011. As discussed below, we preliminarily determine that Goodnite Sdn Bhd (``Goodnite'') failed to cooperate to the best of its ability and are, therefore, applying adverse facts available (``AFA'') to Goodnite's PRC-origin merchandise. If these preliminary results are adopted in our final results of review, we will instruct U.S. Customs and Border Protection (``CBP'') to assess antidumping duties on entries of subject merchandise during the POR.
Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People's Republic of China: Final Results of the Expedited Third Sunset Review of the Antidumping Duty Order
On August 1, 2011, the Department of Commerce (``Department'') initiated the third sunset review of the antidumping duty order on tapered roller bearings and parts thereof, finished and unfinished (``TRBs'') from the People's Republic of China (``PRC'') pursuant to section 751(c) of the Tariff Act of 1930, as amended (``Act''). On August 16, 2011, the Timken Company (``Timken''), a domestic producer and the petitioner in the TRBs less-than-fair-value investigation, notified the Department that it intended to participate in the sunset review. On August 16, 2011, the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union, AFL-CIO-CLC (``USW''), a union that represents workers engaged in the manufacturing of tapered roller bearings and parts thereof in the United States, also notified the Department that it intended to participate in the sunset review. The Department did not receive a notice of intent to participate from any respondent interested party. Based on the notices of intent to participate and adequate response filed by Timken and USW (together, ``the domestic parties''), and the lack of response from any respondent interested party, the Department conducted an expedited (120-day) sunset review of the antidumping duty order on tapered roller bearings from the PRC pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2). See Antidumping Duty Order; Tapered Roller Bearings and Parts Thereof, Finished or Unfinished, From the People's Republic of China, 52 FR 22667 (June 15, 1987), as amended, Tapered Roller Bearings From the People's Republic of China; Amendment to Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order in Accordance With Decision Upon Remand, 55 FR 6669 (Feb. 26, 1990) (``Order''). As a result of this sunset review, the Department finds that revocation of the Order would likely lead to continuation or recurrence of dumping, at the levels indicated in the ``Final Results of Sunset Review'' section of this notice, infra.
Final Results of Expedited Sunset Review of Countervailing Duty Order: Certain Lined Paper Products From India
On August 1, 2011, the Department of Commerce (the Department) initiated a sunset review of the countervailing duty (CVD) order on certain lined paper products (CLPP) from India pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). See Initiation of Five-Year (``Sunset'') Review, 76 FR 45778 (August 1, 2011) (Initiation Notice). On the basis of a notice of intent to participate and an adequate substantive response filed on behalf of domestic interested parties and an inadequate response (in this case, no response) from respondent interested parties, the Department decided to conduct an expedited sunset review of this CVD order pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C). As a result of this review, the Department finds that revocation of the CVD order would be likely to lead to continuation or recurrence of a countervailable subsidy at the level indicated in the ``Final Results of Review'' section of this notice.
Final Results of Expedited Sunset Review of Antidumping Duty Orders: Lined Paper Products From India, Indonesia, and the People's Republic of China
On August 1, 2011, the Department of Commerce (``the Department'') initiated a sunset review of the antidumping duty (``AD'') orders on lined paper products (``CLPP'') from India, Indonesia, and the People's Republic of China (``PRC'') pursuant to section 751(c) of the Tariff Act of 1930, as amended (``the Act''). See Initiation of Five-Year (``Sunset'') Review, 76 FR 45778 (August 1, 2011). On the basis of a notice of intent to participate and an adequate substantive response filed on behalf of domestic interested parties and an inadequate response (in this case, no response) from respondent interested parties in each of these reviews, the Department decided to conduct expedited sunset reviews of these AD orders pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(A). As a result of these reviews, the Department finds that revocation of the antidumping duty orders would likely lead to a continuation or recurrence of dumping at the margins identified in the ``Final Results of Review'' section of this notice.
Diamond Sawblades and Parts Thereof From the Republic of Korea: Preliminary Results of Antidumping Duty Administrative Review
The Department of Commerce (``Department'') is conducting an administrative review of the antidumping duty order on diamond sawblades and parts thereof (``diamond sawblades'') from the Republic of Korea (``Korea''). The period of review is January 23, 2009, through October 31, 2010. This review covers imports of diamond sawblades from three manufacturers/exporters: Ehwa Diamond Industrial Co., Ltd. (``Ehwa''); Hyosung D&P Co., Ltd. (``Hyosung''); and Shinhan Diamond Industrial Co., Ltd. (``Shinhan''). The Department preliminarily finds that Shinhan and Ehwa made sales of the subject merchandise below normal value. For Hyosung, we have determined to apply adverse facts available as a result of its failure to provide the information necessary to determine an antidumping duty rate for the preliminary results and its failure to provide information within the deadlines established by the Department. Pursuant to an order issued by the U.S. Court of International Trade (``CIT'') on October 24, 2011, liquidation of the entries covered by this administrative review is enjoined. Interested parties are invited to comment on these preliminary results. The Department will issue the final results not later than 120 days from the date of publication of this notice.
Diamond Sawblades and Parts Thereof From the People's Republic of China: Preliminary Results of Antidumping Duty Administrative Review and Intent To Rescind Review in Part
In response to timely requests, the Department of Commerce (the Department) is conducting an administrative review of the antidumping duty order on diamond sawblades and parts thereof (diamond sawblades) from the People's Republic of China (PRC). The period of review (POR) is January 23, 2009, through October 31, 2010. We have preliminarily determined that sales have been made below normal value by the companies subject to individual examination in this review. We invite interested parties to comment on these preliminary results. Parties who submit comments in this review are requested to submit with each argument (1) A statement of the issue and (2) a brief summary of the argument.
Revisions to the Export Administration Regulations (EAR): Control of Gas Turbine Engines and Related Items the President Determines No Longer Warrant Control Under the United States Munitions List (USML)
The Bureau of Industry and Security publishes this proposed rule that describes how military gas turbine engines and related articles that the President determines no longer warrant control under Category VI, VII, or VIII of the United States Munitions List (USML) would be controlled under the Commerce Control List (CCL) in new Export Control Classification Numbers (ECCNs) 9A619, 9B619, 9C619, 9D619 and 9E619. In addition, this proposed rule would control military trainer aircraft turbo prop engines and related items, which are currently controlled under ECCN 9A018.a.2 or .a.3, 9D018 or 9E018, under new ECCN 9A619, 9D619 or 9E619. This rule is one of a planned series of proposed rules that are part of the Administration's Export Control Reform Initiative under which various types of articles presently controlled on the USML under the International Traffic in Arms Regulations (ITAR) would, instead, be controlled on the CCL in accordance with the requirements of the Export Administration Regulations (EAR), if and after the President determines that such articles no longer warrant control on the USML. This proposed rule is being published in conjunction with a proposed rule from the Department of State, Directorate of Defense Trade Controls that would consolidate in USML Category XIX the military gas turbine engines and related articles that would remain on the USML.
Revisions to the Export Administration Regulations (EAR): Control of Military Vehicles and Related Items That the President Determines No Longer Warrant Control on the United States Munitions List
The Bureau of Industry and Security publishes a third proposed rule that describes how articles the President determines no longer warrant control under Category VII (military vehicles and related articles) of the United States Munitions List (USML) would be controlled under the Commerce Control List (CCL). This proposed rule would re-propose, with certain changes, five new Export Control Classification Numbers (ECCNs) on the Commerce Control List (CCL) that were proposed in a proposed rule published on July 15, 2011 (76 FR 41958). The revised ECCNs in this proposed rule are the result of continued deliberations of the Bureau of Industry and Security, the Department of Defense and the Department of State and recommendations of commenters on the July 15 proposed rule. This proposed rule is being published in conjunction with a proposed rule by the Department of State, Directorate of Defense Trade Controls to remove from Category VII of the USML (22 CFR 121.1, Category VII) articles that the President determines no longer warrant control on the USML.
International Services Surveys: Amendments to the BE-120, Benchmark Survey of Transactions in Selected Services and Intangible Assets With Foreign Persons
This final rule amends the regulations of the Bureau of Economic Analysis, Department of Commerce (BEA) to set forth the reporting requirements for the BE-120, Benchmark Survey of Transactions in Selected Services and Intellectual Property with Foreign Persons. The amended regulations for the BE-120 include both definition changes and the addition of three schedules to better collect data in accordance with new international economic accounting standards. In addition, this rule changes the BE-120 survey title from ``Benchmark Survey of Transactions in Selected Services and Intangible Assets with Foreign Persons'' to ``Benchmark Survey of Transactions in Selected Services and Intellectual Property with Foreign Persons'' because the term ``intellectual property'' is better understood by U.S. respondents. The BE-120 survey covers transactions in selected services and intellectual property with foreign persons in benchmark years. In non- benchmark years, the universe estimates for these transactions are derived from sample data reported on BEA's follow-on survey, which is the Quarterly Survey of Transactions in Selected Services and Intangible Assets with Foreign Persons (BE-125). The data collected by the BE-120 will be used by BEA to estimate the trade in services component of the U.S. International Transactions Accounts and other economic accounts compiled by BEA. The data are also needed by the U.S. government to monitor U.S. exports and imports of selected services and intellectual property; analyze their impact on the U.S. and foreign economies; support U.S. international trade policy for selected services and intellectual property; and assess and promote U.S. competitiveness in international trade in services. In addition, the data will improve the ability of U.S. businesses to identify and evaluate market opportunities.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.