Consumer Product Safety Commission – Federal Register Recent Federal Regulation Documents

Under the Commission's regulations, any infant cushion/pillow that meets the criteria set forth in the Commission's regulations at 16 CFR 1500.18(a)(16)(i), is currently a banned hazardous substance. In July 2005, the Commission received a petition from Boston Billows, Inc. asking the Commission to amend 16 CFR 1500.18(a)(16)(i)(A)-(E) to provide an exception to the ban when the product is specifically designed, intended and promoted for mothers to use when breastfeeding and requested by a Pediatrician or a Board Certified Lactation Consultant. On July 10, 2006, the Commission voted to grant the petition to the extent it requests the Commission to commence a rulemaking process to evaluate whether the Boston Billow nursing pillow and other infant cushions/pillows or pillow-like products \1\ could result in an amendment to the existing ban. Accordingly, this advance notice of proposed rulemaking (ANPR) initiates a rulemaking proceeding that could result in an amendment to the existing ban on infant cushions/pillows. This proceeding is commenced under the Federal Hazardous Substances Act (FHSA).

The Consumer Product Safety Commission published a notice of proposed rulemaking in the Federal Register of August 10, 2006, regarding all terrain vehicles (``ATVs''). The document contained an incorrect e-mail address to send comments.

The Consumer Product Safety Commission is issuing this revision to correct an erroneous citation designation in the Notice of systematic review of current regulations published in the Federal Register on June 7, 2006.

In the Federal Register of May 15, 2006 (71 FR 28017), the Consumer Product Safety Commission published a notice in accordance with provisions of the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35) to announce the agency's intention to seek extension of approval of the collection of information in the Safety Standard for Automatic Residential Garage Door Operators (16 CFR part 1211). One comment was received in response to that notice stating that reporting of problems with garage door operations should be mandatory and posted on the internet. Section 15(b) of the Consumer Product Safety Act, 15 U.S.C. 2064(b), requires every manufacturer, importer, distributor and retailer of a consumer product distributed in commerce who obtains information which reasonably supports the conclusion that such product contains a defect which could create a substantial product hazard or creates an unreasonable risk of serious injury or death, to immediately inform the Commission. If a determination is made that a substantial hazard exists regarding garage doors or garage door operators, a recall of that product may be issued and posted on the CPSC Web site at http:/ /www.cpsc.gov. In addition, product-related injuries treated in hospital emergency rooms are reported in the National Electronic Injury Surveillance System at https://www.cpsc.gov/LIBRARY/neiss.html. Accordingly, the Commission now announces that it has submitted to the Office of Management and Budget a request for extension of approval of that collection of information without change for a period of three years from the date of approval. The Consumer Product Safety Improvement Act of 1990 (Pub. L. 101- 608, 104 Stat. 3110) requires all automatic residential garage door openers manufactured after January 1, 1993, to comply with the entrapment protection requirements of UL Standard 325 that were in effect on January 1, 1992. In 1992, the Commission codified the entrapment protection provisions of UL Standard 325 in effect on January 1, 1992, as the Safety Standard for Automatic Residential Garage Door Operators, 16 CFR part 1211, Subpart A. Certification regulations implementing the standard require manufacturers, importers and private labelers of garage door operators subject to the standard to test their products for compliance with the standard, and to maintain records of that testing. Those regulations are codified at 16 CFR part 1211, subparts B and C. The Commission uses the records of testing and other information required by the certification regulations to determine that automatic residential garage door operators subject to the standard comply with its requirements. The Commission also uses this information to obtain corrective actions if garage door operators fail to comply with the standard in a manner which creates a substantial risk of injury to the public.

Section 15(b) of the Consumer Product Safety Act, 15 U.S.C. 2064(b), requires manufacturers, distributors, and retailers of consumer products to report potential product hazards to the Consumer Product Safety Commission. On May 26, 2006, the Commission solicited comments on proposed revisions to its interpretative rule advising manufacturers, distributors, and retailers how to comply with the requirements of section 15(b). The proposed revisions identified additional factors the Commission and staff consider when assessing whether a product is defective or not. The proposed revisions also clarified that compliance with voluntary or mandatory product safety standards may be considered by the Commission in making certain determinations under section 15. After considering public comments, the Commission issues the accompanying final rule.\1\

In the Federal Register of April 26, 2006 (71 FR 24651), the Consumer Product Safety Commission published a notice in accordance with provisions of the Paperwork Reduction Act of 1995 (44 U.S.C. chapter 35) to announce the agency's intention to seek extension of approval of the collection of information in the Safety Standard for Cigarette Lighters (16 CFR part 1210). One comment from the American Academy of Pediatrics was received in support of the continued testing and data collection. By publication of this notice, the Commission announces that it has submitted to the Office of Management and Budget (OMB) a request for extension of approval of that collection of information without change for three years from the date of approval. The Safety Standard for Cigarette Lighters requires disposable and novelty lighters to be manufactured with a mechanism to resist operation by children younger than five years of age. Certification regulations implementing the standard require manufacturers and importers to submit to the Commission a description of each model of lighter, results of prototype qualification tests for compliance with the standard, and a physical specimen of the lighter before the introduction of each model of lighter in commerce. The Commission uses the records of testing and other information required by the certification regulations to determine that disposable and novelty lighters have been tested and certified for compliance with the standard by the manufacturer or importer. The Commission also uses this information to obtain corrective actions if disposable or novelty lighters fail to comply with the standard in a manner that creates a substantial risk of injury to the public.

It is the policy of the Commission to publish settlements which it provisionally accepts under the Consumer Product Safety Act in the Federal Register in accordance with the terms of 16 CFR 1118.20(e). Published below is a provisionally-accepted Settlement Agreement with Family Dollar, a corporation, containing a civil penalty of $100,000.

The Commission is considering whether there may be a need to update and strengthen its regulation of fireworks devices. This advance notice of proposed rulemaking (``ANPR'') initiates a rulemaking proceeding under the Federal Hazardous Substances Act (``FHSA''). The Commission is soliciting written comments concerning the risks of injury associated with fireworks that do not comply with the current fireworks device regulations, the regulatory options discussed in this notice, other possible ways to address these risks, and the economic impacts of the various regulatory alternatives. The Commission also invites interested persons to submit an existing standard, or a statement of intent to modify or develop a voluntary standard, to address the risk of injury described in this notice.\1\

The Consumer Product Safety Commission (CPSC or Commission) is revising its regulations governing the Commission's involvement in voluntary standards activities. The revisions more accurately reflect current Commission practices and strengthen oversight of staff involvement in standards making activities. The revisions also codify existing procedures for internet disclosure and public comment regarding standards activities in which Commission staff is actively involved.\1\

This document announces the Office of Management and Budget's (OMB) approval of the Commission's collection of information requirements contained in the Standard for the Flammability (Open Flame) of Mattress Sets, 16 CFR part 1633, under OMB Control No. 3041- 0133.

In the Federal Register of March 28, 2006 (71 FR 15388), the Consumer Product Safety Commission published a notice in accordance with provisions of the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35) to announce the agency's intention to seek extension of approval of the collection of information required in the Safety Standard for Walk-Behind Power Lawn Mowers (16 CFR part 1205). No comments were received in response to this notice. By publication of this notice, the Commission announces that it has submitted to the Office of Management and Budget (OMB) a request for extension of approval of that collection of information without change for a period of three years from the date of approval by OMB. The Safety Standard for Walk-Behind Power Lawn Mowers establishes performance and labeling requirements for mowers to reduce unreasonable risks of injury resulting from accidental contact with the moving blades of mowers. Certification regulations implementing the standard require manufacturers, importers and private labelers of mowers subject to the standard to test mowers for compliance with the standard, and to maintain records of that testing. The records of testing and other information required by the certification regulations allow the Commission to determine that walk- behind power mowers subject to the standard comply with its requirements. This information also enables the Commission to obtain corrective actions if mowers fail to comply with the standard in a manner that creates a substantial risk of injury to the public.

The United States Consumer Product Safety Commission (Commission or CPSC) has received a petition (HP 06-1) requesting that the Commission ban toy jewelry containing more than 0.06% lead. The Commission solicits written comments concerning the petition.

The Consumer Product Safety Commission (CPSC or Commission) announces its fiscal year 2006 program for systematic review of its current substantive regulations to ensure, to the maximum practical extent, consistency among them and with respect to accomplishing program goals. In fiscal year 2006, the following three regulations will be evaluated: Safety standard for matchbooks, 16 CFR part 1202; toy rattles, 16 CFR part 1500.18(a)(1); and baby bouncers, walker- jumpers, and baby walkers, 16 CFR part 1500.18(a)(6). The primary purpose of the review is to assess the degree to which the regulations under review remain consistent with the Commission's program policies. In addition, each regulation will be examined with respect to the extent that it is current and relevant to CPSC program goals. Attention will also be given to whether the regulations can be streamlined, if possible, to minimize regulatory burdens, especially on small entities. To the degree consistent with other Commission priorities and subject to the availability of personnel and fiscal resources, specific regulatory or other projects may be undertaken in response to the results of the review. The Commission solicits written comments from interested persons concerning the designated regulations' currentness and consistency with Commission policies and goals, and suggestions for streamlining where appropriate. In so doing, commenters are requested to specifically address how their suggestions for change could be accomplished within the statutory frameworks for Commission action under the Consumer Product Safety Act (CPSA), 15 U.S.C. 2051-2084, and the Federal Hazardous Substances Act (FHSA), 15 U.S.C. 1261-1278.

Section 15(b) of the Consumer Product Safety Act, 15 U.S.C. 2064(b), requires manufacturers, distributors, and retailers of consumer products to report potential product hazards to the Consumer Product Safety Commission. The Commission publishes proposed revisions to its interpretative rule advising manufacturers, distributors, and retailers how to comply with the requirements of section 15(b). The proposed revisions identify certain factors the Commission and staff consider when assessing whether a product is defective or not. The proposed revisions also clarify that compliance with voluntary or mandatory product safety standards may be considered by the Commission in making certain determinations under section 15(b).\1\ In addition, the Commission may consider the adoption of an interpretative regulation related to the statutory factors for the assessment of civil penalties pursuant to section 20, CPSA (15 U.S.C. 2069(b), (c)). A separate Federal Register notice, if approved, will be issued for public comment.

As required by the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), the Consumer Product Safety Commission (CPSC or Commission) requests comments on a proposed collection of information from persons who may voluntarily register and participate in a Consumer Opinion Forum posted on the CPSC Web site, https://wwww.cpsc.gov. The Commission will consider all comments received in response to this notice before requesting approval of this collection of information from the Office of Management and Budget.

As required by the Paperwork Reduction Act of 1995 (44 U.S.C. chapter 35), the Consumer Product Safety Commission requests comments on a proposed extension of approval of a collection of information from manufacturers and importers of citizens band base station antennas. The collection of information is in regulations implementing the Safety Standard for Omnidirectional Citizens Band Base Station Antennas (16 CFR part 1204). These regulations establish testing and recordkeeping requirements for manufacturers and importers of antennas subject to the standard. The Commission will consider all comments received in response to this notice before requesting an extension of approval of this collection of information from the Office of Management and Budget (OMB).

On April 11, 2005, the Consumer Product Safety Commission (CPSC or Commission) issued an advance notice of proposed rulemaking (ANPR) under the Consumer Product Safety Act (CPSA) that began a rulemaking proceeding addressing a possible unreasonable risk of injury and death associated with the mechanical malfunction of cigarette lighters. The CPSA provides that a proposed standard under that act must be issued within 12 months of publication of the ANPR, unless the 12-month period is extended by the Commission for good cause. In this notice, the Commission extends the period for issuing any proposed CPSA rule until December 31, 2007.

As required by the Paperwork Reduction Act (44 U.S.C. Chapter 35), the Consumer Product Safety Commission requests comments on a proposed request for an extension of approval of a collection of information from manufacturers and importers of walk-behind power lawn mowers. This collection of information consists of testing and recordkeeping requirements in certification regulations implementing the Safety Standard for Walk-Behind Power Lawn Mowers (16 CFR part 1205). The Commission will consider all comments received in response to this notice before requesting an extension of approval of this collection of information from the Office of Management and Budget.

It is the policy of the Commission to publish settlements which it provisionally accepts under the Consumer Product Safety Act in the Federal Register in accordance with the terms of 16 CFR 1118.20(e). Published below is a provisionally-accepted Settlement Agreement with Acuity Brands, Inc., containing a civil penalty of $700,000.00.

In the Federal Register of December 5, 2005 (70 FR 72427), the Consumer Product Safety Commission published a notice in accordance with provisions of the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), to announce the agency's intention to seek extension of approval of collections of information in regulations implementing two flammability standards for carpets and rugs. The regulations are codified at 16 CFR parts 1630 and 1631, and prescribe requirements for testing and recordkeeping by persons and firms issuing guaranties of products subject to the Standard for the Surface Flammability of Carpets and Rugs and the Standard for the Surface Flammability of Small Carpets and Rugs. No comments were received in response to that notice. Therefore, by publication of this notice, the Commission announces that it has submitted to the Office of Management and Budget a request for extension of approval of those collections of information without change.

The Consumer Product Safety Commission (CPSC or Commission) is amending its statement of organization and functions to reflect changes in the Commission's organization as well as editorial and address changes.

It is the policy of the Commission to publish settlements which it provisionally accepts under the Consumer Product Safety Act in the Federal Register in accordance with the terms of 16 CFR 1118.20(e). Published below is a provisionally-accepted Settlement Agreement with SMC Marketing Corp., a corporation, containing a civil penalty of $500,000.00.