Nuclear Regulatory Commission September 18, 2018 – Federal Register Recent Federal Regulation Documents
Results 1 - 2 of 2
Xcel Energy, Monticello Nuclear Generating Plant; Independent Spent Fuel Storage Installation
The U.S. Nuclear Regulatory Commission (NRC) is issuing an exemption in response to a request submitted by Xcel Energy on October 18, 2017, from meeting Technical Specification (TS) 1.2.5 of Attachment A of Certificate of Compliance (CoC) No. 1004, Amendment No. 10, which requires that all dry shielded canister (DSC) closure welds, except those subjected to full volumetric inspection, be dye penetrant tested in accordance with the requirements of American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code Section III, Division 1, Article NB-5000. This exemption applies to five loaded Standardized NUHOMS[supreg] 61BTH, Dry Shielded Canisters (DSCs) 11 through 15, at the Monticello Nuclear Generating Plant (MNGP) Independent Spent Fuel Storage Installation (ISFSI).
Vistra Operations Company LLC; Comanche Peak Nuclear Power Plant, Unit No. 1
The U.S. Nuclear Regulatory Commission (NRC) is considering issuance of an amendment to Facility Operating License No. NPF-87, issued to Vistra Operations Company LLC (the licensee), for operation of the Comanche Peak Nuclear Power Plant (CPNPP), Unit No. 1. The proposed exigent amendment would revise CPNPP Technical Specification (TS) 3.8.4, ``DC [Direct Current] SourcesOperating,'' to allow the licensee additional time to replace two affected battery cells in the safety-related batteries for CPNPP, Unit No. 1. Specifically, the proposed one-time change would add a Required Action to TS 3.8.4, Condition B, to extend the completion time from 2 hours to 18 hours to repair each affected battery cell.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
