Consumer Product Safety Commission 2013 – Federal Register Recent Federal Regulation Documents

The United States Consumer Product Safety Commission (Commission) is correcting a final rule that appeared in the Federal Register of October 23, 2013 (78 FR 63019). The document established a standard for bassinets and cradles that incorporates by reference ASTM F2194-13, with certain modifications. The Commission is correcting two references to sections of ASTM F2194-13.

In accordance with section 104(b) of the Consumer Product Safety Improvement Act of 2008 (CPSIA), also known as the Danny Keysar Child Product Safety Notification Act, the U.S. Consumer Product Safety Commission (Commission or CPSC) has published consumer product safety standards for numerous durable infant or toddler products, including infant bath seats, toddler beds, and full-size baby cribs. These standards incorporated by reference the ASTM voluntary standards associated with the products, with some modifications. In August 2011, Congress enacted Public Law 112-28, which sets forth a process for updating standards that the Commission has issued under the authority of section 104(b) of the CPSIA. In accordance with that process, the CPSC is publishing this direct final rule, revising the CPSC's standards for infant bath seats, toddler beds, and full-size cribs, to incorporate by reference more recent versions of the applicable ASTM standards.

Pursuant to the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), the Consumer Product Safety Commission (Commission or CPSC) announces that the CPSC has submitted to the Office of Management and Budget (OMB) a request for extension of approval of a collection of information for the safety standard for infant bath seats.

In this document, the Consumer Product Safety Commission (Commission, CPSC, or we) proposes an interpretive rule to set forth principles and guidelines for the content and form of voluntary recall notices that firms provide as part of corrective action plans under Section 15 of the Consumer Product Safety Act (CPSA). The Commission has issued regulations interpreting the requirements of section 15 of the CPSA. The existing regulations provide for notice to the public of the corrective action that a firm agrees to undertake. The regulations, however, do not provide any guidance regarding the information that should be included in a recall notice issued as part of a corrective action plan agreement. The proposed rule would set forth the Commission's expectations for voluntary remedial actions and recall notices, bearing in mind that certain elements of product recalls vary and each notice should be tailored appropriately. The proposed rule also would provide that, when appropriate, a corrective action plan negotiated under our regulations may include compliance program-related requirements.

Section 106 of the Consumer Product Safety Improvement Act of 2008 (CPSIA) deemed the provisions of ASTM International Standard F963, ``Standard Consumer Safety Specifications for Toy Safety'' (ASTM F963), to be consumer product safety standards issued by the U.S. Consumer Product Safety Commission (CPSC, Commission, or we). Among other things, ASTM F963 contains provisions regarding sound-producing toys. Existing CPSC regulations pertaining to caps intended for use with toy guns refer to obsolete equipment, but the ASTM F963 provisions for sound-producing toys allow the use of a broader array of more precise and more readily available test equipment for sound measurement. In addition, the ASTM standard requires fewer measurements and permits use of more automated equipment that would increase the efficiency of testing. Because the existing regulations are obsolete and have been superseded by the requirements of ASTM F963, the final rule revokes the existing regulations pertaining to caps intended for use with toy guns and toy guns not intended for use with caps. The final rule is unchanged from the rule as proposed in the notice of proposed rulemaking (NPR).

As required by the Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. Chapter 35), the Consumer Product Safety Commission (CPSC or Commission) requests comments on a proposed extension of approval of a collection of information for the Publicly Available Consumer Product Safety Information Database. The Commission will consider all comments received in response to this notice before requesting an extension of approval of this collection of information from the Office of Management and Budget (OMB).

The Danny Keysar Child Product Safety Notification Act, Section 104 of the Consumer Product Safety Improvement Act of 2008 (CPSIA), requires the United States Consumer Product Safety Commission (Commission or CPSC) to promulgate consumer product safety standards for durable infant or toddler products. These standards are to be ``substantially the same as'' applicable voluntary standards or more stringent than the voluntary standard if the Commission concludes that more stringent requirements would further reduce the risk of injury associated with the product. The Commission is issuing a safety standard for bassinets and cradles in response to the direction under Section 104(b) of the CPSIA.

The Consumer Product Safety Commission (CPSC, Commission) announces that there will be an opportunity for interested persons to present oral comments on the notice of proposed rulemaking (NPR) the Commission issued proposing a standard to reduce the risk of injury associated with children ingesting magnets that are part of a magnet set. Any oral comments will be part of the rulemaking record.

The Commission has a safety standard requiring that disposable and novelty lighters meet specified requirements for child resistance. The standard defines ``disposable lighters,'' in part, as refillable lighters that use butane or similar fuels and have a Customs Value or ex-factory price below a threshold value (initially set at $2.00 in 1993). The standard provides that the initial $2.00 value adjusts every 5 years for inflation, as measured by the percentage change since June 1993, in the monthly Producer Price Index (PPI) for Miscellaneous Fabricated Products. The adjustment is rounded to the nearest $0.25 increment. The price adjusted in November 2003, when changes in the PPI from June 1993 to June 2003 indicated a revised Customs Value or ex- factory price of $2.25. Due to an increase in the PPI, the Customs Value or ex-factory price has recently adjusted to $2.50. This rule revises the cigarette lighter standard to state that the import value has adjusted to $2.50 based on the change to the PPI.

As required by the Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. Chapter 35), the Consumer Product Safety Commission (CPSC or Commission) requests comments on a proposed extension of approval of a collection of information for the Publicly Available Consumer Product Safety Information Database. The Commission will consider all comments received in response to this notice before requesting an extension of approval of this collection of information from the Office of Management and Budget (OMB).

In this document, the Commission publishes its semiannual regulatory flexibility agenda. In addition, this document includes an agenda of regulatory actions the Commission expects to be under development or review by the agency during the next year. This document meets the requirements of the Regulatory Flexibility Act and Executive Order 12866.

Pursuant to the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), the Consumer Product Safety Commission (Commission or CPSC) announces that it has submitted to the Office of Management and Budget (OMB) a request for extension of approval of a collection of information from persons who have been involved in or have witnessed incidents associated with consumer products.

The Consumer Product Safety Commission (CPSC or Commission) is issuing this rule to amend its existing regulations pertaining to procedures and requirements for exclusions from lead limits under section 101(b) of the Consumer Product Safety Improvement Act of 2008 (CPSIA) to reflect statutory changes mandated by Public Law 112-28.

In the Federal Register of April 19, 2013 (76 FR 23545), the Consumer Product Safety Commission (CPSC or Commission) published a notice in accordance with provisions of the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), to announce the CPSC's intention to seek extension of an approval of information collection regarding a form used to evaluate whether third party conformity assessment bodies meet the requirements to test for compliance to specified children's product safety rules. No comments were received in response to that notice. Therefore, by publication of this notice, the Commission announces that it has submitted to the Office of Management and Budget (OMB), a request for extension of approval of those collections of information, without change.

Notice of telephonic prehearing conference for the consolidated case: In the Matter of MAXFIELD AND OBERTON HOLDINGS, LLC; CRAIG ZUCKER, individually and as officer of MAXFIELD AND OBERTON HOLDINGS, LLC; ZEN MAGNETS, LLC; and STAR NETWORKS USA, LLC; CPSC Docket No. 12-1; CPSC Docket No. 12-2; and CPSC Docket No. 13-2.

In accordance with section 104(b) of the Consumer Product Safety Improvement Act of 2008 (CPSIA), also known as the Danny Keysar Child Product Safety Notification Act, the U.S. Consumer Product Safety Commission (Commission or CPSC) has published consumer product safety standards for numerous durable infant or toddler products, including infant walkers and infant swings. These standards incorporated by reference the ASTM voluntary standards associated with those products, with some modifications. In August 2011, Congress enacted legislation which sets forth a process for updating standards that the Commission has issued under the authority of the CPSIA. In accordance with that process, the CPSC is publishing this direct final rule, revising the CPSC's standards for infant walkers and infant swings, to incorporate by reference more recent versions of the applicable ASTM standards.

The Consumer Product Safety Commission (CPSC, Commission, or we) is announcing its intent to hold a one-day CPSC Safety Academy to discuss current regulatory requirements, including testing and certification, the mandatory toy standard, and compliance processes. We invite interested parties to participate in or attend the CPSC Safety Academy.

The Consumer Product Safety Commission (CPSC or Commission) has received two requests, asking that the Commission initiate proceedings under section 8 of the Consumer Product Safety Act (CPSA) to determine that adult portable bed rails pose an unreasonable risk of injury and initiate related rulemaking under section 9 of the CPSA. Because both requests ask for rulemaking concerning the same product, CPSC is considering the requests as a single petition (CP13-1). The Commission invites written comments concerning the petition.

The Consumer Product Safety Commission (CPSC or Commission) is announcing an opportunity for public comment on the proposed collection of certain information by the agency. Under the Paperwork Reduction Act of 1995 (PRA), federal agencies are required to publish notice in the Federal Register concerning each proposed collection of information and to allow 60 days for public comment in response to the notice. This notice solicits comments on a survey of table saw users to determine the effectiveness of modular blade guards.

The Danny Keysar Child Product Safety Notification Act, Section 104 of the Consumer Product Safety Improvement Act of 2008 (CPSIA), requires the United States Consumer Product Safety Commission (Commission or CPSC) to promulgate consumer product safety standards for durable infant or toddler products. These standards are to be ``substantially the same as'' applicable voluntary standards or more stringent than the voluntary standard if the Commission concludes that more stringent requirements would further reduce the risk of injury associated with the product. The Commission is proposing a safety standard for carriages and strollers in response to the direction under Section 104(b) of the CPSIA.

The Consumer Product Safety Commission (CPSC or Commission) is announcing that a proposed collection of information regarding a survey on the effectiveness of product registration cards in facilitating product recalls has been submitted to the Office of Management and Budget (OMB) for review and clearance under the Paperwork Reduction Act of 1995.