2019 – Federal Register Recent Federal Regulation Documents
Results 1,251 - 1,300 of 27,329
Agency Information Collection Activity: Application for Refund of Educational Contributions
In compliance with the Paperwork Reduction Act (PRA) of 1995, this notice announces that the Veterans Benefits Administration, Department of Veterans Affairs, will submit the collection of information abstracted below to the Office of Management and Budget (OMB) for review and comment. The PRA submission describes the nature of the information collection and its expected cost and burden and it includes the actual data collection instrument.
Notice of OFAC Sanctions Actions
The Department of the Treasury's Office of Foreign Assets Control (OFAC) is publishing the names of one or more persons that have been placed on OFAC's Specially Designated Nationals and Blocked Persons List (the SDN List) based on OFAC's determination that one or more applicable legal criteria were satisfied. All property and interests in property subject to U.S. jurisdiction of these persons are blocked, and U.S. persons are generally prohibited from engaging in transactions with them.
Suspension of Community Eligibility
This rule identifies communities where the sale of flood insurance has been authorized under the National Flood Insurance Program (NFIP) that are scheduled for suspension on the effective dates listed within this rule because of noncompliance with the floodplain management requirements of the program. If the Federal Emergency Management Agency (FEMA) receives documentation that the community has adopted the required floodplain management measures prior to the effective suspension date given in this rule, the suspension will not occur and a notice of this will be provided by publication in the Federal Register on a subsequent date. Also, information identifying the current participation status of a community can be obtained from FEMA's Community Status Book (CSB). The CSB is available at https:// www.fema.gov/national-flood-insurance-program-community-statu s-book.
Medicare Program; Application From the Joint Commission for Initial CMS-Approval of its Home Infusion Therapy Accreditation Program
This final notice announces our decision to approve The Joint Commission (TJC) for initial recognition as a national accrediting organization for home infusion therapy (HIT) suppliers that wish to participate in the Medicare program. An HIT supplier that participates must meet the Medicare conditions for coverage (CfCs).
Supplemental Evidence and Data Request on Management of High-Need, High-Cost (HNHC) Patients: A Realist and Systematic Review
The Agency for Healthcare Research and Quality (AHRQ) is seeking scientific information submissions from the public. Scientific information is being solicited to inform our review on Management of High-Need, High-Cost Patients: A Realist and Systematic Review, which is currently being conducted by the AHRQ's Evidence-based Practice Centers (EPC) Program. Access to published and unpublished pertinent scientific information will improve the quality of this review.
Statement of Organization, Functions, and Delegations of Authority
The Food and Drug Administration (FDA), Center of Drug Evaluation and Research (CDER) has modified its structure. This new organizational structure was approved by the Secretary of Health and Human Services on September 25, 2019.
Proposed Submission of Information Collections for OMB Review; Comment Request; Payment of Premiums; Termination Premium
The Pension Benefit Guaranty Corporation (PBGC) intends to request the Office of Management and Budget (OMB) to extend approval, under the Paperwork Reduction Act, of a collection of information for the termination premium under its regulation on Payment of Premiums (29 CFR part 4007) (OMB control number 1212-0064; expires May 31, 2020), without change. This notice informs the public of PBGC's intent and solicits public comment on the collection of information.
Proposed Amendments to the Stress Test Rule
The Federal Housing Finance Agency (FHFA) is requesting comment on a proposed rule that would amend its stress testing rule, consistent with section 401 of the Economic Growth, Regulatory Relief, and Consumer Protection Act (EGRRCPA). Specifically, the proposed rule would revise the minimum threshold for the regulated entities to conduct stress tests from $10 billion to $250 billion, remove the requirements for Federal Home Loan Banks (Banks) subject to stress testing, and remove the adverse scenario from the list of required scenarios. These amendments align FHFA's rule with rules adopted by other financial institution regulators that implement the Dodd-Frank Wall Street Reform and Consumer Protection Act (Dodd-Frank Act) stress testing requirements, as amended by EGRRCPA. The proposed rule also makes certain conforming and technical changes.
National Association of the Deaf Petition for Rulemaking; Hearing Requirement for Commercial Motor Vehicle Drivers
FMCSA requests public comments on the National Association of the Deaf's (NAD) petition for rulemaking to rescind the requirement for interstate drivers of commercial motor vehicles (CMVs) to be able to hear. NAD also requests that FMCSA amend the requirement that interstate drivers be able to speak, and the rule prohibiting the use of interpreters during the administration of the commercial driver's license (CDL) skills test. NAD believes the origins of the hearing requirement dates to a time of misguided stereotypes about the abilities and inabilities of deaf and hard of hearing individuals and the rules should now be changed.
Margin and Capital Requirements for Covered Swap Entities; Correction
The Farm Credit Administration (FCA or we) is correcting an interim final rule that published in the Federal Register on March 19, 2019, which we jointly issued with four other Agencies. The joint interim final rule amended the regulations governing Margin and Capital Requirements for Covered Swap Entities to address the status of certain non-cleared swaps and non-cleared security-based swaps if the United Kingdom withdraws from the European Union without a negotiated settlement.
Airworthiness Directives; International Aero Engines AG Turbofan Engines
The FAA proposes to adopt a new airworthiness directive (AD) for International Aero Engines AG (IAE) V2500-A1, V2522-A5, V2524-A5, V2525-D5, V2527-A5, V2527E-A5, V2527M-A5, V2528-D5, V2530-A5, V2531-E5, and V2533-A5 turbofan engine models with a certain diffuser case assembly installed. This proposed AD was prompted by a report of a manufacturing quality escape that could impact the life of the diffuser case assembly. This proposed AD would require removal of the affected diffuser case assembly from service and replacement with a part eligible for installation. The FAA is proposing this AD to address the unsafe condition on these products.
Proposed Removal of Class E Airspace, and Proposed Amendment of Class D and Class E Airspace; Jacksonville, FL
This action proposes to remove Class E airspace area designated as an extension to a Class D surface area for Cecil Airport (previously Cecil Field), Jacksonville, FL, as the Cecil very high frequency omnidirectional range (VOR) has been decommissioned, and the VOR approach cancelled. This action would also amend Class D and E airspace by updating the following airport names: Jacksonville NAS (Towers Field) (previously Jacksonville NAS); Herlong Recreational Airport (formerly Herlong Airport); and, Jacksonville Executive Airport at Craig (previously Craig Municipal Airport). Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area. Also, this action would update the geographic coordinates of Cecil Airport, Jacksonville NAS (Towers Field), Jacksonville International Airport, Mayport NAS, and Whitehouse NOLF. This action also would make an editorial change replacing Airport/Facility Directory with the term Chart Supplement in the legal descriptions of associated Class D airspace.
Amendment of Class E Airspace; Pittsfield, MA
This action amends Class E airspace extending upward from 700 feet above the surface at Pittsfield Municipal Airport, Pittsfield, MA, to accommodate airspace reconfiguration due to the redesign of the Localizer (LOC)/Distance Measuring Equipment (DME) Runway (RWY) 26 approach. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport. This action also updates the geographic coordinates of this airport.
Proposed Amendment of Class D and Class E Airspace, Nashua, NH
This action proposes to amend Class D airspace, Class E airspace designated as an extension to a Class D surface area, and Class E airspace extending upward from 700 feet above the surface at Boire Field, Nashua, NH, to accommodate airspace reconfiguration due to the decommissioning of CHERN non-directional beacon, and cancellation of the associated approaches. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport. This action also would update the geographic coordinates of this airport, as well as Manchester Very High Frequency Omnidirectional Range Tactical Air Navigation (VORTAC). In addition, this action would recognize the name change of Pepperell Airport, MA, (formerly Sports Center Airport). This action also would replace the outdated term Airport/Facility Directory with the term Chart Supplement in the legal descriptions of associated Class D and E airspace of Boire Field.
Proposed Amendment of Class E Airspace; Pratt, KS
This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Pratt Regional Airport, Pratt, KS. The FAA is proposing this action as the result of an airspace review caused by the decommissioning of the Pratt non- directional beacon (NDB), which provided navigation information for the instrument procedures at this airport. Additionally, the geographic coordinates of the Pratt Regional Airport, would also be updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Gulfstream Aerospace Corporation (Gulfstream) Model GVI airplanes. This proposed AD was prompted by a report that the primary flight control actuation system (PFCAS) linear variable displacement transducer (LVDT) mechanical disconnect monitor may not trigger the disconnect of the affected control surfaces as required in the event of a control surface failure. This proposed AD would require updating the software of each PFCAS remote electronics unit (REU), which includes an improvement to the LVDT. The FAA is proposing this AD to address the unsafe condition on these products.
Proposed Amendment of Class E Airspace; Gunnison, CO
This action proposes to amend the Class E airspace designated as a surface area, at Gunnison-Crested Butte Regional Airport, Gunnison, CO. The proposal would increase the circular radius of the Class E surface area and add an extension to the west of the airport. Also, this action proposes to amend the Class E airspace by adding an airspace area designated as an extension to a Class D or Class E surface area, to the southwest of the airport. Additionally, this action proposes to amend the Class E airspace extending upward from 700 feet above the surface by significantly reducing the area around the airport, except to the west and southwest of the airport. Furthermore, this action proposes to amend the Class E airspace extending upward from 1,200 feet above the surface by removing this area. This area is wholly contained within the Denver Class E6 en route airspace area and duplication is not necessary. Lastly, this action proposes several administrative changes to the airspace legal descriptions for the airport. These changes are necessary to accommodate airspace redesign for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A319-115 airplanes; Model A320-214, -216, -232, -251N, and -271N airplanes; and Model A321-211, -231, -251N, - 251NX, -253N, -271N, -271NX, and -272N airplanes. This proposed AD was prompted by reports of incomplete installations of the over wing panel lug attachments in the production assembly line. This proposed AD would require a one-time detailed inspection of certain attaching points on the left-hand and right-hand wings for the correct installation of certain hardware, and, depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A319-131, -132, and -133 airplanes, Model A320-231, -232, and -233 airplanes, and Model A321-131, -231, and -232 airplanes. This proposed AD was prompted by a report of rupture of a hydraulic reservoir air pressurization hose on an in-service airplane, leading to air leakage that was undetectable during normal operation, and found during subsequent zonal inspection. This proposed AD would require modifying the airplane by replacing the affected bleed air hoses with a modification of hydraulic pressurization lines, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2017-05-12, which applies to certain Airbus SAS Model A318-112 airplanes, Model A319-111, -112, -115, -132, and -133 airplanes, Model A320-214, -232, and -233 airplanes, and Model A321-211, -212, -213, - 231, and -232 airplanes. AD 2017-05-12 requires a one-time eddy current conductivity measurement of certain cabin, cargo compartment, and frame structural parts to determine if aluminum alloy with inadequate heat treatment was used, and replacement if necessary. Since AD 2017-05-12 was issued, it was determined that aluminum alloy with inadequate heat treatment had been used for additional structural parts. This proposed AD would retain the requirements of AD 2017-05-12, and for certain airplanes, would require additional work, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Regular Rate Under the Fair Labor Standards Act
The Fair Labor Standards Act (FLSA or Act) generally requires that covered, nonexempt employees receive overtime pay of at least one and one-half times their regular rate of pay for time worked in excess of 40 hours per workweek. The regular rate includes all remuneration for employment, subject to the exclusions outlined in section 7(e) of the FLSA. In this final rule, the Department of Labor (Department) updates a number of regulations on the calculation of overtime compensation both to provide clarity and to better reflect the 21st- century workplace. These changes will promote compliance with the FLSA, provide appropriate and updated guidance in an area of evolving law and practice, and encourage employers to provide additional and innovative benefits to workers without fear of costly litigation.
Incorporation of Existing Statement of Policy Regarding Requests for Participation in the Affairs of an Insured Depository Institution by Convicted Individuals
The Federal Deposit Insurance Corporation (``FDIC'') proposes to revise the existing regulations requiring persons convicted of certain criminal offenses to obtain prior written consent before participating in the conduct of the affairs of any depository institution to incorporate the FDIC's existing Statement of Policy, and to amend the regulations setting forth the FDIC's procedures and standards applicable to an application to obtain the FDIC's prior written consent. Following the issuance of final regulations, the FDIC's existing Statement of Policy would be rescinded. The proposed incorporation of the Statement of Policy into the FDIC's regulations would provide for greater transparency as to its application, provide greater certainty as to the FDIC's application process and help both insured depository institutions and affected individuals to understand its impact and to potentially seek relief from its provisions.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This proposed AD was prompted by a report that cracking was discovered in a channel within a structural support member for the rudder quadrant, rudder feel unit assembly, and environmental control system due to fatigue. This proposed AD would require repetitive inspections of the rudder quadrant box assembly for any cracking, and modification of the rudder quadrant box assembly. The FAA is proposing this AD to address the unsafe condition on these products.
Recordkeeping and Reporting Requirements for Security-Based Swap Dealers, Major Security-Based Swap Participants, and Broker-Dealers
In accordance with the Dodd-Frank Wall Street Reform and Consumer Protection Act (``Dodd-Frank Act''), the Securities and Exchange Commission (``Commission''), pursuant to the Securities Exchange Act of 1934 (``Exchange Act''), is adopting recordkeeping, reporting, and notification requirements applicable to security-based swap dealers (``SBSDs'') and major security-based swap participants (``MSBSPs''), securities count requirements applicable to certain SBSDs, and additional recordkeeping requirements applicable to broker- dealers to account for their security-based swap and swap activities. The Commission also is making substituted compliance available with respect to recordkeeping, reporting, and notification requirements under Section 15F of the Exchange Act and the rules thereunder.
Carbon and Alloy Steel Threaded Rod From Thailand: Antidumping Duty Order
Based on affirmative final determinations by the Department of Commerce (Commerce) and the International Trade Commission (ITC), Commerce is issuing an antidumping duty order on carbon and alloy steel threaded rod from Thailand.
Vertical Metal File Cabinets From the People's Republic of China: Antidumping and Countervailing Duty Orders
Based on affirmative final determinations by the Department of Commerce (Commerce) and the International Trade Commission (ITC), Commerce is issuing the antidumping duty (AD) and countervailing duty (CVD) orders on vertical metal file cabinets (file cabinets) from the People's Republic of China (China).
Truck and Bus Tires From the People's Republic of China: Initiation and Preliminary Results of Antidumping Duty Changed Circumstances Review
The Department of Commerce (Commerce) is simultaneously initiating and issuing the preliminary results of a changed circumstances review (CCR) of the antidumping duty order on truck and bus tires from the People's Republic of China (China) to determine whether Sailun Group Co., Ltd. (Sailun Group) is the successor-in-interest to Sailun Jinyu Group Co., Ltd. (Sailun Jinyu), and whether Sailun (Shenyang) Tire Co., Ltd. (Sailun Shenyang), is the successor-in-interest to Shenyang Peace Radial Tyre Manufacturing Co., Ltd. (Shenyang Peace). Based on the information on the record, we preliminarily determine that Sailun Group is the successor-in-interest to Sailun Jinyu and that Sailun Shenyang is the successor-in-interest to Shenyang Peace for purposes of determining antidumping duty liability. We invite interested parties to comment on these preliminary results.
Certain Carbon and Alloy Steel Cut-To-Length Plate From Austria: Final Results of the Antidumping Duty Administrative Review; 2016-2018
The Department of Commerce (Commerce) finds that sales of certain carbon and alloy steel cut-to-length plate (CTL plate) from Austria were made at less than normal value during the period of review (POR) November 14, 2016 through April 30, 2018.
Utility Scale Wind Towers From the Socialist Republic of Vietnam: Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Determination With Final Antidumping Duty Determination
The Department of Commerce (Commerce) preliminarily determines that countervailable subsidies are being provided to producers and exporters of utility scale wind towers (wind towers) from the Socialist Republic of Vietnam (Vietnam). The period of investigation is January 1, 2018 through December 31, 2018. Interested parties are invited to comment on this preliminary determination.
Utility Scale Wind Towers From Indonesia: Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Determination With Final Antidumping Duty Determination
The Department of Commerce (Commerce) preliminarily determines that countervailable subsidies are being provided to producers and exporters of utility scale wind towers (wind towers) from Indonesia. The period of investigation is January 1, 2018 through December 31, 2018. Interested parties are invited to comment on this preliminary determination.
Utility Scale Wind Towers From Canada: Preliminary Affirmative Countervailing Duty Determination, and Alignment of Final Determination With Final Antidumping Duty Determination
The Department of Commerce (Commerce) preliminarily determines that countervailable subsidies are being provided to producers and exporters of utility scale wind towers (wind towers) from Canada. The period of investigation is January 1, 2018 through December 31, 2018. Interested parties are invited to comment on this preliminary determination.
Applications for New Awards; Native Hawaiian Education Program
The Department of Education (Department) is issuing a notice inviting applications for fiscal year (FY) 2020 for the Native Hawaiian Education (NHE) program, Catalog of Federal Domestic Assistance (CFDA) number 84.362A. This notice relates to the approved information collection under OMB control number 1894-0006.
Extension of Compliance Date for States' Query of the Drug and Alcohol Clearinghouse
FMCSA extends the compliance date for the requirement established by the December 5, 2016, Commercial Driver's License Drug and Alcohol Clearinghouse (Clearinghouse) final rule that States request information from the Clearinghouse (``query'') about individuals before completing certain commercial driver's license (CDL) transactions for those drivers. The States' compliance with this requirement, currently due to begin on January 6, 2020, is delayed until January 6, 2023. This rule will, however, allow States the option to voluntarily request Clearinghouse information beginning on January 6, 2020. The compliance date extension allows FMCSA the time needed to complete its work on a forthcoming rulemaking to address the States' use of driver-specific information from the Clearinghouse, and time to develop the information technology platform through which States will electronically request and receive Clearinghouse information. The compliance date of January 6, 2020, remains in place for all other requirements set forth in the Clearinghouse final rule.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew exemptions for 90 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these individuals to continue to operate CMVs in interstate commerce without meeting the vision requirements in one eye.
Procurement List; Additions and Deletions
This action adds products to the Procurement List that will be furnished by nonprofit agencies employing persons who are blind or have other severe disabilities, and deletes services from the Procurement List previously furnished by such agencies.
Procurement List; Proposed additions and deletions
The Committee is proposing to add services to the Procurement List that will be furnished by nonprofit agencies employing persons who are blind or have other severe disabilities, and deletes products and services previously furnished by such agencies.
Agency Information Collection Activities; Submission to the Office of Management and Budget for Review and Approval; Comment Request; Submission for Review
U.S. Agency for International Development (USAID), as part of its continuing effort to reduce paperwork and respondent burden, invites the general public and other Federal agencies to take this opportunity to comment on the following information collection, as required by the Paperwork Reduction Act of 1995, Public Law 104-13. Comments are requested concerning (1) whether the proposed collection of information is necessary for sustaining USAID-funded programming; (2) the accuracy of USAID's estimate of the burden of the proposed collection of information; (3) ways to enhance the quality, utility, and clarity of the information to be collected; and (4) ways to minimize the burden of the collection of information on respondents.
Allocation of Assets in Single-Employer Plans; Benefits Payable in Terminated Single-Employer Plans; Interest Assumptions for Valuing and Paying Benefits
This final rule amends the Pension Benefit Guaranty Corporation's regulations on Benefits Payable in Terminated Single- Employer Plans and Allocation of Assets in Single-Employer Plans to prescribe certain interest assumptions under the benefit payments regulation for plans with valuation dates in January 2020 and interest assumptions under the asset allocation regulation for plans with valuation dates in the first quarter of 2020. These interest assumptions are used for valuing benefits and paying certain benefits under terminating single-employer plans covered by the pension insurance system administered by PBGC.
New Postal Products
The Commission is noticing a recent Postal Service filing for the Commission's consideration concerning negotiated service agreements. This notice informs the public of the filing, invites public comment, and takes other administrative steps.
Reef Fish Fishery of the Gulf of Mexico; 2019 Commercial and Recreational Accountability Measure and Closures for Gulf of Mexico Lane Snapper
NMFS implements an accountability measure (AM) for the lane snapper commercial and recreational sectors in the exclusive economic zone (EEZ) of the Gulf of Mexico (Gulf) for the 2019 fishing year through this temporary rule. NMFS has projected that the 2019 stock annual catch limit (ACL) for Gulf lane snapper has been met. Therefore, NMFS closes the commercial and recreational sectors for Gulf lane snapper on December 13, 2019, and they will remain closed through the end of the current fishing year on December 31, 2019. These closures are necessary to protect the Gulf lane snapper resource.
Announcement of OMB Approvals of Information Collections
The Office of Management and Budget (OMB) has approved certain Pension Benefit Guaranty Corporation (PBGC) information collections under the Paperwork Reduction Act. This notice lists the approved information collections and provides their OMB control numbers and current expiration dates.
Projects Approved for Consumptive Uses of Water
This notice lists the projects approved by rule by the Susquehanna River Basin Commission during the period set forth in DATES.
Actions Taken at December 5, 2019, Meeting
As part of its regular business meeting held on December 5, 2019, in Harrisburg, Pennsylvania, the Commission approved the applications of certain water resources projects, and took additional actions, as set forth in the Supplementary Information below.
Grandfathering (GF) Registration Notice
This notice lists Grandfathering Registration for projects by the Susquehanna River Basin Commission during the period set forth in DATES.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.