March 29, 2018 – Federal Register Recent Federal Regulation Documents

Notice is hereby given, pursuant to the provisions of the rules and regulations of the U.S. Commission on Civil Rights (Commission) and the Federal Advisory Committee Act that the Oregon Advisory Committee (Committee) will hold a meeting via web conference on Tuesday, April 17, 2018, from 1:00 p.m.-2:30 p.m. PST for the purpose of hearing public testimony on human trafficking issues in the state.

In compliance with the Paperwork Reduction Act of 1995, the Defense Logistics Agency announces a proposed public information collection and seeks public comment on the provisions thereof. Comments are invited on: Whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information shall have practical utility; the accuracy of the agency's estimate of the burden of the proposed information collection; ways to enhance the quality, utility, and clarity of the information to be collected; and ways to minimize the burden of the information collection on respondents, including through the use of automated collection techniques or other forms of information technology.

This action amends and removes multiple VHF Omnidirectional Range (VOR) Federal airways in northcentral United States as part of the FAA's Next Generation Air Transportation System (NextGen) efforts to safely improve the overall efficiency of the National Airspace System (NAS) and due to the decommissioning of the Tiverton, OH, VOR/ Distance Measuring Equipment (VOR/DME) navigation aid. This action also incorporates NAV CANADA's amendment to one of the airways that crosses into Canada's airspace.

The SBA Office of the National Ombudsman (ONO) is issuing this notice to solicit nominations of qualified owners, operators, and officers of small business concerns to be considered for appointment by the SBA Administrator as a member of a Small Business Regional Regulatory Fairness Board (``RegFair Board''). The RegFair Board members on the ten regional boards serve as advisors to the National Ombudsman on regulatory enforcement and compliance issues of concern to small business owners within their respective regions and surface those issues to the attention of the National Ombudsman. Nominations of qualified candidates are being sought to fill vacancies on the RegFair Boards. RegFair Board members are appointed by, and serve at the pleasure of, the SBA Administrator for terms of no longer than three years. The Administrator may reappoint an individual for additional terms of service. Board members serve without compensation. They will, however, be reimbursed for authorized travel-related expenses at per diem rates established by GSA when asked to perform official duties as a Board member.

The U.S. Nuclear Regulatory Commission (NRC) is granting an exemption to allow a departure from elements of the certification information of Tier 1 of the generic AP1000 design control document (DCD) and is issuing License Amendment Nos. 114 and 113 to Combined Licenses (COL), NPF-91 and NPF-92, respectively. The COLs were issued to Southern Nuclear Operating Company, and Georgia Power Company, Oglethorpe Power Corporation, MEAG Power SPVM, LLC, MEAG Power SPVJ, LLC, MEAG Power SPVP, LLC, and the City of Dalton, Georgia (collectively referred to as the licensee); for construction and operation of the Vogtle Electric Generating Plant (VEGP) Units 3 and 4, located in Burke County, Georgia. The granting of the exemption allows the changes to Tier 1 information asked for in the amendment. Because the acceptability of the exemption was determined in part by the acceptability of the amendment, the exemption and amendment are being issued concurrently. The exemption revises the plant-specific Tier 1 information and corresponding changes to COL Appendix C, and the amendment changes the associated plant-specific DCD Tier 2 material incorporated into the VEGP Updated Final Safety Analysis Report (UFSAR), to update Reactor Coolant System (RCS) requirements for reactor vessel head vent (RVHV) mass flow rate for the VEGP Units 3 and 4.

The Food and Drug Administration (FDA or Agency) is announcing the availability of a revised draft guidance for industry on generic doxycycline hyclate oral delayed-release tablets, entitled ``Product- Specific Guidance for Doxycycline Hyclate.'' The revised draft guidance, when finalized, will provide product-specific recommendations on, among other things, the design of bioequivalence (BE) studies to support abbreviated new drug applications (ANDAs) for doxycycline hyclate oral delayed-release tablets.

The Food and Drug Administration (FDA, the Agency, or we) is announcing an additional public workshop on medical gas regulation entitled ``Medical Gas Regulation: Workshop III.'' FDA has previously held two public workshops entitled ``Medical Gas Regulation: Workshop I'' and ``Medical Gas Regulation: Workshop II.'' The topic to be discussed is potential areas of Federal drug regulation that should be revised with respect to medical gases.

The Commission is noticing a recent Postal Service filing for the Commission's consideration concerning negotiated service agreements. This notice informs the public of the filing, invites public comment, and takes other administrative steps.

In accordance with the Paperwork Reduction Act of 1995, ED is proposing an extension of an existing information collection.

The Environmental Protection Agency (``EPA'' or ``the Agency'') is seeking public comment on any aspect of the use of isobutanol in gasoline. Butamax Advanced Biofuels, LLC (``Butamax''), a manufacturer of isobutanol, has submitted an application pursuant to the regulations titled ``Registration of Fuels and Fuel Additives'' for the registration of isobutanol as a gasoline additive at up to 16 volume percent. Butamax has submitted information that would likely satisfy the applicable registration requirements. The Clean Air Act requires the EPA to register a fuel or fuel additive once all the applicable registration requirements have been met by the manufacturer. Due to the potential for the widespread introduction of isobutanol into commerce, we are taking steps to make the public aware of the likelihood of this registration. We are seeking public comment regarding any issues we should take into consideration for this registration and any supplemental actions we should consider under the Clean Air Act to further protect public health and welfare.

We are adopting a new airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model A109E, A109S, AW109SP, A119, and AW119 MKII helicopters. This AD requires inspecting the main rotor blade (MRB) tip cap for disbonding. This AD is prompted by a report of the in-flight loss of an MRB tip cap. The actions of this AD are intended to prevent an unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain Honda Aircraft Company LLC Model HA-420 airplanes. This AD requires incorporating a temporary revision into the airplane flight manual and replacing faulty power brake valves upon condition. This AD was prompted by reports of unannunciated asymmetric braking during ground operations and landing deceleration. We are issuing this AD to address the unsafe condition on these products.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We are superseding Airworthiness Directive (AD) 2004-03-07, which applied to certain Airbus Model A320-111, -211, -212, and -231 series airplanes. AD 2004-03-07 required repetitive inspections for fatigue cracking around the fasteners attaching the pressure panel to the flexible bracket at a certain frame (FR), adjacent to the longitudinal beams on the left and right sides of the airplane; and repair as necessary. This new AD retains certain requirements of AD 2004-03-07, expands the applicability, and requires an inspection of the fastener holes on the pressure panel and modification or repair as applicable. This AD was prompted by fatigue tests which revealed cracking around the fasteners attaching the pressure panel to the flexible bracket, and by the discovery of additional cracks under the longitudinal beams at locations that are not included in the inspection area required by AD 2004-03-07. We are issuing this AD to address the unsafe condition on these products.