May 22, 2017 – Federal Register Recent Federal Regulation Documents

Results 151 - 165 of 165
Wireless Telecommunications Bureau Seeks To Update the Record in the Wireless Radio Services Reform Proceeding
Document Number: 2017-10269
Type: Notice
Date: 2017-05-22
Agency: Federal Communications Commission, Agencies and Commissions
In this document, the Wireless Telecommunications Bureau (Bureau) invites interested parties to update the record in the WRS Reform NPRM and Order proceeding, which the Commission initiated in May 2010.
Notice to all Interested Parties of the Termination of the Receivership of 10403-First State Bank, Cranford, New Jersey
Document Number: 2017-10268
Type: Notice
Date: 2017-05-22
Agency: Federal Deposit Insurance Corporation, Agencies and Commissions
Project Management Plan Guidance
Document Number: 2017-10262
Type: Notice
Date: 2017-05-22
Agency: Federal Highway Administration, Department of Transportation
This notice announces and outlines the purpose and contents of Project Management Plans, when they are required, and the preferred form and procedure for submission of these Plans to FHWA. The Guidance clarifies prior Guidance, including when to prepare plan updates.
Environmental Impact Statement; Bronx County, NY
Document Number: 2017-10260
Type: Notice
Date: 2017-05-22
Agency: Federal Highway Administration, Department of Transportation
The FHWA is issuing this notice to advise the public that an Environmental Impact Statement (EIS) will be prepared for a proposed construction project known as the Hunts Point Interstate Access Improvement Project, in Bronx County, New York.
Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company
Document Number: 2017-10254
Type: Notice
Date: 2017-05-22
Agency: Federal Reserve System, Agencies and Commissions
Formations of, Acquisitions by, and Mergers of Bank Holding Companies
Document Number: 2017-10253
Type: Notice
Date: 2017-05-22
Agency: Federal Reserve System, Agencies and Commissions
Coastal Migratory Pelagic Resources of the Gulf of Mexico and South Atlantic; 2016-2017 Commercial Accountability Measure and Closure for King Mackerel in Western Zone of the Gulf of Mexico
Document Number: 2017-10251
Type: Rule
Date: 2017-05-22
Agency: Department of Commerce, National Oceanic and Atmospheric Administration
NMFS implements an accountability measure (AM) for commercial king mackerel in the western zone of the Gulf of Mexico (Gulf) exclusive economic zone (EEZ) through this temporary rule. NMFS has determined that the commercial quota for king mackerel in the western zone of the Gulf EEZ will be reached by May 21, 2017. Therefore, NMFS closes the western zone of the Gulf EEZ to commercial king mackerel fishing on May 21, 2017. This closure is necessary to protect the Gulf king mackerel resource.
Notice of Intent To Grant an Exclusive Patent License
Document Number: 2017-10250
Type: Notice
Date: 2017-05-22
Agency: National Aeronautics and Space Administration, Agencies and Commissions
NASA hereby gives notice of its intent to grant an exclusive patent license in the United States to practice the invention described and claimed in U.S. Patent No. 6,917,203 entitled ``Current Signature Sensor,'' KSC-12220, to Graftel, LLC, having its principal place of business in Elk Grove Village, IL.
Submission for OMB Review; Comment Request
Document Number: 2017-10173
Type: Notice
Date: 2017-05-22
Agency: Department of Defense, Department of the Army
The Department of Defense has submitted to OMB for clearance, the following proposal for collection of information under the provisions of the Paperwork Reduction Act.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-10140
Type: Proposed Rule
Date: 2017-05-22
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This proposed AD was prompted by cracking in the door sill area of the aft cargo door. This proposed AD would require repetitive inspections of the aft cargo door lower torsion box area, and corrective actions if necessary. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
Document Number: 2017-10139
Type: Proposed Rule
Date: 2017-05-22
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Saab AB, Saab Aeronautics Model 340A (SAAB/SF340A) airplanes. This proposed AD was prompted by the discovery of circuit breakers of unsuitable strength that fail to protect the system from overcurrent. This proposed AD would require replacing certain circuit breakers. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-10138
Type: Proposed Rule
Date: 2017-05-22
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A319 series airplanes; Model A320-211, -212, -214, -231, -232, and -233, airplanes; and Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. This proposed AD was prompted by a report of cracks on frame forks and outer skin on the forward and aft cargo compartment doors. This proposed AD would require repetitive inspections of the frame forks, and corrective actions if necessary. This proposed AD would also include optional modifications that constitute terminating action. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2017-10137
Type: Proposed Rule
Date: 2017-05-22
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (CL-601-3A, CL-601-3R, and CL-604 Variants) airplanes. This proposed AD was prompted by a report indicating that the lanyard length of the passenger drop down oxygen masks is too long. This proposed AD would require replacing the existing oxygen mask lanyards with lanyards of the correct length. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Embraer S.A. Airplanes
Document Number: 2017-10136
Type: Proposed Rule
Date: 2017-05-22
Agency: Federal Aviation Administration, Department of Transportation
We are revising an earlier notice of proposed rulemaking (NPRM) to supersede an Airworthiness Directive (AD) for all Embraer S.A. Model ERJ 190-100 STD, -100 LR, and -100 IGW airplanes; and Model ERJ 190-200 STD, -200 LR, and -200 IGW airplanes. This action revises the NPRM by adding a requirement to revise the maintenance or inspection program, as applicable, to incorporate new airworthiness limitations and adding certain airplanes to the applicability. We are proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions impose an additional burden over those proposed in the NPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2017-10135
Type: Proposed Rule
Date: 2017-05-22
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Dassault Aviation Model FALCON 2000 and FALCON 2000EX airplanes. This proposed AD was prompted by reports of ice accretion on the airplane wing due to the failure of certain anti-ice piccolo tubes in the wing outboard slats. This proposed AD would require repetitive inspections of each anti-ice piccolo tube and corrective action if necessary. This proposed AD also provides an optional terminating action for the repetitive inspections. We are proposing this AD to address the unsafe condition on these products.