October 27, 2011 – Federal Register Recent Federal Regulation Documents
Results 101 - 118 of 118
Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Amendments to the Queen Conch and Reef Fish Fishery Management Plans of Puerto Rico and the U.S. Virgin Islands
NMFS proposes to implement Amendment 2 to the Fishery Management Plan for Queen Conch Resources of Puerto Rico and the U.S. Virgin Islands and Amendment 5 to the Fishery Management Plan for the Reef Fish Fishery of Puerto Rico and the U.S. Virgin Islands (Amendments 2 and 5), prepared by the Caribbean Fishery Management Council (Council). This proposed rule would: establish annual catch limits (ACLs) and accountability measures (AMs) for queen conch and for all reef fish units or complexes that are classified as undergoing overfishing or that contain sub-units which are classified as undergoing overfishing (i.e., snapper, grouper and parrotfish); allocate ACLs among island management areas and, in Puerto Rico only, among commercial and recreational sectors; revise the composition of the snapper and grouper complexes; prohibit fishing for and possession of three parrotfish species; establish recreational bag limits for snappers, groupers, and parrotfishes; and establish framework procedures for queen conch and reef fish species. Amendments 2 and 5 would also revise management reference points and status determination criteria for queen conch, snappers, groupers, and parrotfishes. The intended effect of the rule is to prevent overfishing of queen conch and reef fish species while maintaining catch levels consistent with achieving optimum yield (OY).
Privacy Act of 1974; System of Records
The Office of the Secretary of Defense is deleting a systems of record notice from its existing inventory of record systems subject to the Privacy Act of 1974, (5 U.S.C. 552a), as amended.
Privacy Act of 1974; System of Records
The Office of the Secretary of Defense is proposing to amend a system of records notice in its existing inventory of records systems subject to the Privacy Act of 1974, (5 U.S.C. 552a), as amended.
Bureau of Educational and Cultural Affairs (ECA)
The Future Leaders Exchange (FLEX) program seeks to promote mutual understanding between the United States and the countries of Eurasia by providing secondary school students from the region the opportunity to live in American society for an academic year. In turn, these students will expose U.S. citizens to the culture, traditions, and lifestyles of people in Eurasia. Public and private non-profit organizations meeting the provisions described in Internal Revenue Code section 26 U.S.C. 501(c)(3) are invited to submit proposals to identify host schools; vet, select, and monitor host families; and place and monitor a portion of the students participating in the FLEX program during the 2012-13 academic year. Pending the availability of funds, an FY 2012 cooperative agreement will provide the monies required to recruit and screen host families; secure school placements; conduct student and host family orientations; provide cultural and educational enrichment activities; handle all counseling and programmatic issues; and evaluate program implementation.
Privacy Act of 1974; System of Records
The Office of the Secretary of Defense is proposing to amend a system of records notice in its existing inventory of records systems subject to the Privacy Act of 1974, (5 U.S.C. 552a), as amended.
Federal Bureau of Prisons
The U.S. Department of Justice, Federal Bureau of Prisons (BOP) announces the availability of the Record of Decision (ROD) concerning the proposed award of a contract to house approximately 1,750 (+/- 30 percent) Federal, low-security, adult male, non-U.S. citizen, criminal aliens, with 90 months or less remaining to serve on their sentences, within a contractor-owned and operated correctional facility.
Airworthiness Directives; Agusta S.p.A. Model AB139 and AW139 Helicopters
This amendment supersedes an existing airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model AB139 and AW139 helicopters. This action retains the requirements in the existing AD and adds a daily check of the tailboom panels to detect bulging or deformation of the tailboom outer skin panels. If there is bulging or deformation, this AD requires a mechanic to do a tap inspection for debonding. If the debonded area exceeds a certain limit, this AD requires modifying the tailboom. Also, when an area of debond does not exceed the limits, this AD requires, before further flight, repairing the debonded area of the tailboom or replacing the tailboom. This action also adds a tap inspection for additional tailboom panels and requires the inspection on both sides of the tailboom. This amendment is prompted by the determination that more inspections are required and to limit the applicability only to those helicopters with tailboom assemblies that have not been modified. Modifying the tailboom assembly is terminating action for the requirements of this AD. The actions specified in this AD are intended to detect damage in the tailboom to prevent failure of a tailboom and subsequent loss of control of a helicopter.
Airworthiness Directives; Bell Helicopter Textron Canada (Bell) Model 407 and 427 Helicopters
This document publishes in the Federal Register an amendment adopting Airworthiness Directive (AD) 2011-15-51, which was sent previously to all known U.S. owners and operators of the specified Bell Model 407 and 427 helicopters by individual letters. This AD requires inspecting certain hydraulic servo actuators to determine whether the shaft turns independently of the nut or the clevis assembly. If the shaft turns independently, this AD requires replacing the servo with an airworthy servo. If the shaft does not turn independently, the AD requires inspecting to determine the condition of the lock washers. Based on the condition of the lock washers, the AD requires either replacing the servo with an airworthy servo, or if any tab of the lock washer is not flush against a flat surface of the nut or clevis assembly, bending it flush against a flat surface. The AD also requires reidentifying the servo by metal-impression stamping or by vibro- etching ``67.01'' onto the modification plate. Also, the AD requires before installing a servo with a part number or serial number identified in this AD, not identified by ``67-01'' on the modification plate, inspecting it by following the requirements of this AD. This AD is prompted by a report that a quality escape by a supplier has occurred and certain servos may have a loose nut, shaft, and clevis assembly due to improper lock-washer installation. An investigation after an accident revealed the clevis nut on the servo was loose. The actions specified by this AD are intended to prevent a malfunction of a servo in the flight control system and subsequent loss of control of the helicopter.
Airworthiness Directives; Eurocopter France (Eurocopter) Model EC225LP Helicopters
This amendment adopts a new airworthiness directive (AD) for the Eurocopter Model EC225LP helicopters. This AD requires inspecting the side mount of the pilot and copilot seats to determine if any floor attachment screw, nut, or washer is missing. If a screw, nut, or washer is missing, this AD also requires installing airworthy parts. This AD is prompted by a report that some of the floor attachment screws and nuts under the pilot and co-pilot seats were missing. Further investigation has shown that some of the cup washers that need to be used in installing countersunk head screws that attach the pilot and co-pilot seat frame to the floor were missing. A missing floor attachment screw, washer, or nut, if not detected, could reduce the strength of the seat attachment. The actions specified in this AD are intended to detect a missing floor attachment screw, washer, or nut and help prevent detachment of the seat from the floor during an emergency landing.
Airworthiness Directives; Eurocopter France (Eurocopter) Model AS332C, AS332L, AS332L1, and AS332L2 Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Eurocopter model helicopters. This action requires inspecting the upper end fitting ball joints of the main rotor servocontrols for lateral play, and depending on the findings either repetitively inspecting the ball joint or replacing the servocontrol. This amendment is prompted by reports of noncompliant swaging of the end fitting ball joints on main rotor servocontrols. Investigation has shown that the swaging load applied to the ball joints was 1.3 metric tons instead of the specified 13 metric tons. The actions specified in this AD are intended to prevent failure of the upper end fitting ball joints of the main rotor servocontrols, failure of the upper end fittings, and loss of control of the helicopter.
Airworthiness Directives; Bombardier, Inc. Model CL-215-1A10, CL-215-6B11 (CL-215T Variant), and CL-215-6B11 (CL-415 Variant) Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-215-1A10, CL-215-6B11 (CL-215T Variant), and CL-215-6B11 (CL-415 Variant) airplanes. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Solid Urea From the Russian Federation: Final Results of Antidumping Duty Administrative Review
On June 17, 2011, the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty order on solid urea from the Russian Federation. The solid urea subject to this review was produced and exported by MCC EuroChem (EuroChem). The period of review (POR) is July 1, 2009, through June 30, 2010. Based on our analysis of comments received, we have not made any changes in the margin calculation for EuroChem. The final weighted- average dumping margin for EuroChem is listed below in the section entitled ``Final Results of the Administrative Review.''
Endangered and Threatened Wildlife and Plants: Final Rulemaking To Designate Critical Habitat for Black Abalone
We, the National Marine Fisheries Service (NMFS), hereby designate critical habitat for the endangered black abalone under the Endangered Species Act (ESA). This designation includes approximately 360 square kilometers of rocky intertidal and subtidal habitat within five segments of the California coast between the Del Mar Landing Ecological Reserve to the Palos Verdes Peninsula, as well as on the Farallon Islands, A[ntilde]o Nuevo Island, San Miguel Island, Santa Rosa Island, Santa Cruz Island, Anacapa Island, Santa Barbara Island, and Santa Catalina Island. This designation includes rocky intertidal and subtidal habitats from the mean higher high water (MHHW) line to a depth of -6 meters (m) (relative to the mean lower low water (MLLW) line), as well as the coastal marine waters encompassed by these areas. We are not designating the specific area from Corona Del Mar State Beach to Dana Point, California, because we conclude that the economic benefits of exclusion from the critical habitat designation outweigh the benefits of inclusion and that exclusion of this specific area will not result in the extinction of the species. We also conclude that two of the specific areas proposed for designation (San Nicolas Island and San Clemente Island) are no longer eligible for designation, based on determinations that the U.S. Navy's revised integrated natural resource management plans (INRMPs) for these areas provide benefits to black abalone.
Endangered and Threatened Wildlife and Plants; Removal of the Concho Water Snake From the Federal List of Endangered and Threatened Wildlife and Removal of Designated Critical Habitat
The best available scientific and commercial data indicate that the Concho water snake (Nerodia paucimaculata), a reptile endemic to central Texas, is recovered. Therefore, under the authority of the Endangered Species Act of 1973, as amended (Act), we, the U.S. Fish and Wildlife Service (Service) remove (delist) the Concho water snake from the Federal List of Endangered and Threatened Wildlife, and accordingly, also remove its federally designated critical habitat. This determination is based on a thorough review of all available information, including new information, which indicates that the threats to this species have been eliminated or reduced to the point that the species has recovered and no longer meets the definition of threatened or endangered under the Act. We are also providing notice that the final post-delisting monitoring for the Concho water snake has been completed.
Prohibited Transaction Exemption Procedures; Employee Benefit Plans
This document contains a final rule that supersedes the existing procedure governing the filing and processing of applications for administrative exemptions from the prohibited transaction provisions of the Employee Retirement Income Security Act of 1974 (ERISA), the Internal Revenue Code of 1986 (the Code), and the Federal Employees' Retirement System Act of 1986 (FERSA). The Secretary of Labor is authorized to grant exemptions from the prohibited transaction provisions of ERISA, the Code, and FERSA and to establish an exemption procedure to provide for such relief. This final rule clarifies and consolidates the Department of Labor's exemption procedures and provides the public with a more comprehensive description of the prohibited transaction exemption process.
Nectarines and Fresh Peaches Grown in California; Termination of Marketing Order 916 and the Peach Provisions of Marketing Order 917
This final rule terminates the Federal marketing orders regulating the handling of nectarines and fresh peaches grown in California (orders) and the rules and regulations issued thereunder. The Department of Agriculture (USDA) has determined that these marketing orders are no longer an effective marketing tool for the handling of nectarines and fresh peaches grown in California and that termination best serves the current needs of the industry while also eliminating the costs associated with the operation of the marketing orders.
Office of Hazardous Materials Safety; Notice of Application for Special Permits
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR Part 107, Subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.
Agricultural Career and Employment Grants Program
Section 14204 of the Food, Conservation and Energy Act of 2008 authorizes the Secretary of Agriculture to make grants to assist agricultural employers and farmworkers by improving the supply, stability, safety, and training of the agricultural labor force. Such grants may be made to eligible entities for use in providing services to assist farmworkers who are citizens or otherwise legally present in the United States in securing, retaining, upgrading, or returning from agricultural jobs. The Agriculture, Rural Development, Food and Drug Administration and Related Agencies Appropriations Act, 2010 (2010 Appropriations Act), included an appropriation of $4 million to the U.S. Department of Agriculture's (USDA) Rural Housing Service (RHS) for this program. The delegation of authority and funding for the program has since been transferred to the Office of Advocacy and Outreach (OAO), within Departmental Management of USDA. The purpose of this rulemaking is to establish regulations governing the grants program, including eligibility, application for, evaluation, award and post- award administration of grants made pursuant to the authority granted to the Secretary under Section 14204.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.