Federal Aviation Administration June 1, 2023 – Federal Register Recent Federal Regulation Documents

Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2023-11623
Type: Rule
Date: 2023-06-01
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2023-11621
Type: Rule
Date: 2023-06-01
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
Document Number: 2023-11590
Type: Proposed Rule
Date: 2023-06-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and -402 airplanes. This proposed AD was prompted by reports of the main landing gear (MLG) aft door not opening when using the alternate extension system. This proposed AD would require a one-time inspection of the spring box assembly, repetitive inspections of the cam assembly and alternate release cable assembly, corrective actions if necessary, and a replacement of certain alternate release cable assemblies. In addition, this proposed AD would also require certain aircraft maintenance manuals tasks when installing the cam assembly or alternate release cable assembly. This proposed AD would also prohibit the installation of affected parts. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2023-11584
Type: Proposed Rule
Date: 2023-06-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, -200CB, and -300 series airplanes. This proposed AD was prompted by a report of a crack at fuselage station (STA) 1640 frame web common to the lower hinge intercostal tee clip inboard and center holes of the upper fastener row. This proposed AD would require a maintenance records check for existing repairs at STA 1640, repetitive ultrasonic (UT) inspections for cracking of the frame web, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2023-11591
Type: Proposed Rule
Date: 2023-06-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and A350-1041 airplanes. This proposed AD was prompted by reports that excessively deep spot faces on the front engine mounting bolt holes on the wing pylon were detected on the production line. This proposed AD would require a one-time inspection for clash (interference) of the three front engine mounting bolt holes on both the left and right wing pylons, and, depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Honda Aircraft Company LLC Airplanes
Document Number: 2023-11636
Type: Rule
Date: 2023-06-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding Airworthiness Directive (AD) 2022-18- 03, which applied to certain Honda Aircraft Company LLC (Honda) Model HA-420 airplanes. AD 2022-18-03 required incorporating temporary revisions into the airplane flight manual (AFM) and the quick reference handbook (QRH) that modify procedures for windshield heat operation until the affected windshield assemblies are replaced. This AD retains all actions required by AD 2022-18-03 and corrects typographical errors in certain document numbers specified in certain paragraphs of the regulatory information. The FAA is issuing this AD to address the unsafe condition on these products.
Amendment of Very High Frequency (VHF) Omnidirectional Range (VOR) Federal Airway V-376; Eastern United States
Document Number: 2023-11661
Type: Rule
Date: 2023-06-01
Agency: Federal Aviation Administration, Department of Transportation
This action amends Very High Frequency (VHF) Omnidirectional Range (VOR) Federal airway V-376 by removing the Nottingham, MD (OTT), VOR/Tactical Air Navigational System (VORTAC) from the route description and replacing it with the Casanova, VA (CSN), VORTAC. This action is required due to the planned decommissioning of the Nottingham, MD (OTT), VORTAC as part of FAA's VOR Minimum Operational Network (MON) program. This action does not change the alignment, altitudes, or operating requirements of V-376. In addition, language is added to exclude the airspace within restricted areas R-6601A, R-6601B, and R-6601C.
Special Conditions: Lufthansa Tecknik AG, Airbus Models A319-133 and A321-200 Series Airplanes; Supercapacitor Systems and Installation
Document Number: 2023-11682
Type: Proposed Rule
Date: 2023-06-01
Agency: Federal Aviation Administration, Department of Transportation
This action proposes special conditions for the Airbus Model A319-133 and A321-200 series airplanes. This airplane, as modified by Lufthansa Tecknik AG (Lufthansa), will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is the installation of an uninterruptible power supply (UPS) system based on supercapacitor technology. The current airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.