South Dakota Administrative Rules
Title 74 - Department of Environment And Natural Resources
Article 74:55 - Underground injection control
Chapter 74:55:01 - Underground injection control - Class III wells
- Section 74:55:01:01 - Definitions
- Section 74:55:01:02 - Class III injection wells subject to the provisions of this chapter
- Section 74:55:01:03 - Permit required for well injection - Plans and specifications required
- Section 74:55:01:04 - Date of application for new wells
- Section 74:55:01:05 - Signatories of permit application
- Section 74:55:01:06 - Qualifications for duly authorized representative of signatory
- Section 74:55:01:07 - Certification requirements of signatory
- Section 74:55:01:08 - Duration of permits
- Section 74:55:01:09 - Permit transfer
- Section 74:55:01:10 - Issuance of area permit
- Section 74:55:01:11 - Authorizing new injection wells under area permit
- Section 74:55:01:12 - Secretary's recommendation on permit applications
- Section 74:55:01:13 - Notice of recommendation
- Section 74:55:01:14 - Recommendation becomes final if uncontested
- Section 74:55:01:15 - Contents of petition
- Section 74:55:01:16 - Intervention
- Section 74:55:01:17 - Answers to petitions
- Section 74:55:01:18 - Filing procedures
- Section 74:55:01:19 - Hearing date
- Section 74:55:01:20 - Notice of hearing
- Section 74:55:01:21 - Compliance schedule for permit conditions
- Section 74:55:01:22 - Information not considered confidential
- Section 74:55:01:23 - Criteria for underground source of drinking water
- Section 74:55:01:24 - Designation of exempted aquifers
- Section 74:55:01:25 - Information considered for permit issuance
- Section 74:55:01:26 - Information required in permit application
- Section 74:55:01:26.01 - Technical revisions to an injection permit
- Section 74:55:01:26.02 - Permit amendment required
- Section 74:55:01:27 - Well inventory information
- Section 74:55:01:28 - Determination of influence of injection on groundwater
- Section 74:55:01:29 - Well mechanical integrity test
- Section 74:55:01:30 - Acceptable methods for mechanical integrity tests - Report to secretary
- Section 74:55:01:31 - Well construction requirements
- Section 74:55:01:31.01 - Well construction requirements - Injection wells
- Section 74:55:01:32 - Conducting well logs
- Section 74:55:01:33 - Supervision of well construction and testing
- Section 74:55:01:34 - Determining information on water-bearing injection zone
- Section 74:55:01:35 - Establishment of baseline water quality in new mining areas
- Section 74:55:01:36 - Confinement of recovery fluid
- Section 74:55:01:37 - Monitor well requirements for underground sources of drinking water. Repealed
- Section 74:55:01:38 - Monitor well requirements in formation not considered underground source of drinking water
- Section 74:55:01:39 - Monitoring subsidence
- Section 74:55:01:40 - Minimum requirements for monitor wells
- Section 74:55:01:41 - Production area monitor well location and spacing requirements
- Section 74:55:01:42 - Nonproduction zone monitoring
- Section 74:55:01:43 - Secretary to sample monitor wells
- Section 74:55:01:44 - Prohibitions - Injection volumes and pressure
- Section 74:55:01:45 - Restoration demonstration required. Repealed
- Section 74:55:01:45.01 - Ground water restoration table
- Section 74:55:01:46 - Production area operational monitoring requirements
- Section 74:55:01:47 - Reporting requirements for injection zone
- Section 74:55:01:48 - Duration of monitoring program
- Section 74:55:01:49 - Reporting requirements
- Section 74:55:01:50 - Verifying analysis
- Section 74:55:01:51 - Excursion sampling frequency
- Section 74:55:01:52 - Reporting excursions
- Section 74:55:01:53 - Remedial action for excursion
- Section 74:55:01:53.01 - Excursions - Controlled
- Section 74:55:01:53.02 - Excursions - Not controlled
- Section 74:55:01:54 - Criteria for determination of adequacy of remedial action plan
- Section 74:55:01:55 - Ground water restoration requirements
- Section 74:55:01:56 - Restoration progress reports
- Section 74:55:01:57 - Restoration sampling procedure
- Section 74:55:01:58 - Final restoration - Restoration values achieved
- Section 74:55:01:58.01 - Restoration values not achieved
- Section 74:55:01:59 - Requirements for plugging wells, drill holes, and the repair and conversion of wells
- Section 74:55:01:59.01 - Well plugging records
- Section 74:55:01:59.02 - Maintenance and retention of records
- Section 74:55:01:59.03 - Corrective actions for improperly sealed wells
- Section 74:55:01:60 - Closure of mine site following restoration
- Section 74:55:01:60.01 - Postclosure plan - Estimated costs for postclosure care
- Section 74:55:01:60.02 - General postclosure inspection and maintenance activities
- Section 74:55:01:60.03 - Postclosure operation of monitoring systems
- Section 74:55:01:60.04 - Ground water contamination during the postclosure period
- Section 74:55:01:60.05 - End of the postclosure period
- Section 74:55:01:60.06 - Public notice for Class III wells
- Section 74:55:01:61 - Financial assurance guaranteeing the performance of corrective actions
Disclaimer: These regulations may not be the most recent version. South Dakota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.