Oregon Administrative Rules
Chapter 690 - WATER RESOURCES DEPARTMENT
Division 220 - ABANDONMENT OF WATER SUPPLY WELLS
Section 690-220-0040 - Abandonment of Cased Wells

Universal Citation: OR Admin Rules 690-220-0040

Current through Register Vol. 63, No. 9, September 1, 2024

(1) If all or a portion of the water supply well casing or the liner pipe is not removed during the abandonment of a well, the remaining casing or liner shall be thoroughly ripped or perforated. The number and size of perforations may vary, however, the perforations must be sufficient enough to allow grout to migrate outside the casing and effectively prevent the vertical movement of water. The annular space between the casing or liner and the drillhole wall shall be effectively and completely filled with cement grout applied under pressure.

(2) Perforations are not required in the sealed interval provided proof of the original seal can be verified with the original well report. The verified seal interval shall be filled with cement grout, concrete or unhydrated bentonite.

(3) Uncased portions of a cased well to be abandoned shall be filled in accordance with OAR 690-220-0030 through 690-220-0050.

(4) The well casing to be abandoned may be severed below land surface and removed. (See Figure 220-3.)

To view attachments referenced in rule text, click here to view rule.

Statutory/Other Authority: ORS 536.090 & 537.505 - 537.795

Statutes/Other Implemented: ORS 536.090 & 537.505 - 537.795

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.