Oklahoma Administrative Code
Title 252 - Department of Environmental Quality
Chapter 616 - Industrial Wastewater Systems
Subchapter 5 - General Standards
Section 252:616-5-3 - Reporting

Universal Citation: OK Admin Code 252:616-5-3

Current through Vol. 41, No. 13, March 15, 2024

(a) Monitoring reports, plans and other reports provided to the DEQ must contain data analysis and sample results prepared by a laboratory certified by the DEQ under OAC 252:300.

(b) Monitoring and sampling information shall be supplied to the DEQ on self monitoring report (SMR) forms, other appropriate forms approved by the DEQ and developed for the specific purpose or in such other form and format as may be specified by the DEQ.

(c) An owner or operator must give notice to the DEQ within 24 hours of any wastewater spill or release, followed by written notice to the DEQ within 7 days. This includes violations of permit limits, application or loading rates, or mistimed application at land application sites. Within ten (10) days of notice of excessive loading, the owner or operator must submit a corrective action plan and must perform it when approved. The DEQ may also require corrective action for too frequent or mistimed applications.

Added at 17 Ok Reg 1925, eff 6-12-00; Amended at 18 Ok Reg 1994, eff 6-11-01

Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.