North Dakota Administrative Code
Title 43 - Industrial Commission
Article 43-02 - Mineral Exploration and Development
Chapter 43-02-02.2 - In Situ Leach Mining Rules
Section 43-02-02.2-22 - Technical revisions to an in situ leach mine permit

Current through Supplement No. 392, April, 2024

The department, through permit conditions, may approve proposed technical revisions to the injection well portion of a permit without requiring a permit amendment. These revisions may include the following:

1. Correcting typographical errors;

2. Modifying monitoring plan reporting requirements;

3. Modifying quantities or types of fluids injected that are within the capacity of the facility as permitted and would not interfere with its operation or its ability to meet permit conditions and would not change its classification;

4. Well construction requirements;

5. Adding wells to the wellfield within the permit area if the requirements of section 43-02-02.2-34 are met;

6. Modifying injection rates and pressures;

7. Modifying a well repair, abandonment, plugging, or conversion plan; and

8. Delaying the plugging requirement of subsection 4 of section 43-02-02.2-32 for an unused well.

General Authority: NDCC 38-12-02

Law Implemented: NDCC 38-12-02

Disclaimer: These regulations may not be the most recent version. North Dakota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.