New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 2 - AIR QUALITY (STATEWIDE)
Part 14 - PARTICULATE EMISSIONS FROM COAL BURNING EQUIPMENT
- Section 20.2.14.1 - ISSUING AGENCY
- Section 20.2.14.2 - SCOPE
- Section 20.2.14.3 - STATUTORY AUTHORITY
- Section 20.2.14.4 - DURATION
- Section 20.2.14.5 - EFFECTIVE DATE
- Section 20.2.14.6 - OBJECTIVE
- Section 20.2.14.7 - DEFINITIONS
- Section 20.2.14.8 - AMENDMENT AND SUPERSESSION OF PRIOR REGULATIONS
- Section 20.2.14.9 - DOCUMENTS
- Section 20.2.14.10 to 20.2.14.199 - RESERVED
- Section 20.2.14.200 - Emission Limitations - Equipment Less Than or Equal to 250 MBTU/HOUR HEAT CAPACITY
- Section 20.2.14.201 - Emission Limitations - New Equipment Greater Than 250M BTU/HOUR HEAT CAPACITY
- Section 20.2.14.202 - Emission Limitations - Existing Equipment Greater Than 250M BTU/Hour and Less Than 5000M BTU/HOUR HEAT CAPACITY
- Section 20.2.14.203 - Emission Limitations-Existing Equipment Equal to or Greater Than 5000M BTU/HOUR
- Section 20.2.14.204 - METHOD FOR DETERMINING EMISSIONS LIMITATIONS
- Section 20.2.14.205 - Petition for Test Method of Emission Limitation for Existing Equipment - Heat Capacity Equal to or Greater than 5000M BTU/HOUR
- Section 20.2.14.206 to 20.2.14.299 - RESERVED
- Section 20.2.14.300 - PROCEDURE I, INTRODUCTION
- Section 20.2.14.301 - PROCEDURE I, METHOD
- Section 20.2.14.302 - SAMPLING TRAIN FOR FINE PARTICULATE MATTER, PROCEDURE I
- Section 20.2.14.303 - ARRANGEMENT OF IMPACTION PLATES AND FILTER HOLDER IN THE ANDERSON IMPACTOR, PROCEDURE I
- Section 20.2.14.304 - TEMPERATURE CORRECTION FOR AERODYNAMIC SIZE OF PARTICLES CAPTURED IN THE ANDERSON IMPACTOR, PROCEDURE I
- Section 20.2.14.305 - AERODYNAMIC DIAMETER VS. FLOWRATE THROUGH PLATE 44 OF THE ANDERSON IMPACTOR (50% IMPACTION EFFICIENCY), PROCEDURE I
- Section 20.2.14.306 to 20.2.14.399 - RESERVED
- Section 20.2.14.400 - PROCEDURE II, INTRODUCTION
- Section 20.2.14.401 - PROCEDURE II, METHOD
- Section 20.2.14.402 - SAMPLING TRAIN FOR FINE PARTICULATE MATTER, PROCEDURE II
- Section 20.2.14.403 - ARRANGEMENT OF IMPACTION PLATES AND FILTER IN THE ANDERSON IMPACTOR, PROCEDURE II
- Section 20.2.14.404 - SAMPLE GRAPH OF TEMPERATURE CORRECTION FOR AERODYNAMIC SIZE OF PARTICLES CAPTURED IN THE ANDERSON IMPACTOR, PROCEDURE II
- Section 20.2.14.405 - SAMPLE GRAPH OF AERODYNAMIC DIAMETER VS. FLOWRATE THROUGH PLATE #4 OF THE ANDERSON IMPACTOR (50% IMPACTION EFFICIENCY), PROCEDURE II
Current through Register Vol. 35, No. 18, September 24, 2024
Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
