New Hampshire Code of Administrative Rules
We - Water Well Board
Chapter We 600 - STANDARDS FOR THE CONSTRUCTION, MAINTENANCE AND ABANDONMENT OF WELLS
Part We 602 - NEW WELL CONSTRUCTION
Section We 602.14 - Setback Reductions: Bedrock Wells
Universal Citation: NH Admin Rules We 602.14
Current through Register No. 40, October 3, 2024
(a) For bedrock wells that do not meet the setback requirements specified in We 602.06 through We 602.09, a water well contractor shall use special methods of construction to provide additional protection from potential pollution, as specified in We 602.16.
(b) For bedrock wells that do not meet the setback requirements specified in We 602.08, a water well contractor shall either:
(1) Use special methods of construction to
provide additional protection from potential pollution, as specified in We
602.16; or
(2) Obtain a completed
and signed "Setback Reduction Form" from the property owner, as specified in
We
602.13(c), and submit a copy to the
board as specified in
We
602.13(d); and:
a. Install no less than 40 feet of casing in
the well, with no less than 10 feet of casing into competent bedrock;
and
b. Grout the casing as
specified in We 602.05.
#9179, eff 6-13-08
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
