New Hampshire Code of Administrative Rules
We - Water Well Board
Chapter We 600 - STANDARDS FOR THE CONSTRUCTION, MAINTENANCE AND ABANDONMENT OF WELLS
Part We 602 - NEW WELL CONSTRUCTION
- Section We 602.01 - Public Water Systems
- Section We 602.02 - Reports
- Section We 602.03 - Chlorination
- Section We 602.04 - Discharge of Chlorinated Water
- Section We 602.05 - Grouting of Well Casings
- Section We 602.06 - Well Location: Protective Well Radii, Generally
- Section We 602.07 - Well Location: Setbacks from Septic Systems
- Section We 602.08 - Well Location: Protective Well Radii and Setbacks from Property Boundaries
- Section We 602.09 - Well Location: Other Potential Sources of Contamination
- Section We 602.10 - Well Location: Dug Wells in Areas Prone to Flooding or Standing Water
- Section We 602.11 - Well Location: Underground Storage Tanks
- Section We 602.12 - Well Location: State Approved Septic Plans
- Section We 602.13 - Setback Reductions: General Requirements
- Section We 602.14 - Setback Reductions: Bedrock Wells
- Section We 602.15 - Setback Reductions: Septic Systems
- Section We 602.16 - Setback Reductions: Special Methods of Construction for Bedrock Wells
- Section We 602.17 - Setback Reductions: Setback Reduction Form
- Section We 602.18 - Wells for Public Water Systems
- Section We 602.19 - Private Wells on Lots Served by a Public Water System
- Section We 602.20 - Wells Drilled in Bedrock: Recordkeeping and Reporting
- Section We 602.21 - Wells Drilled in Bedrock: Casing Function and Materials
- Section We 602.22 - Wells Drilled in Bedrock: Installation and Placement of Casing
- Section We 602.23 - Wells Constructed in Unconsolidated Materials: Applicability, Recordkeeping, and Reporting
- Section We 602.24 - Wells Constructed in Unconsolidated Materials: Casing Function and Materials
- Section We 602.25 - Wells Constructed in Unconsolidated Materials: Installation and Placement of Casing
- Section We 602.26 - Driven Wells: Applicability, Recordkeeping, and Reporting
- Section We 602.27 - Driven Wells: Casing Function and Materials
- Section We 602.28 - Driven Wells: Installation and Placement of Casings
- Section We 602.29 - Wells Constructed by Excavation: Applicability Recordkeeping, and Reporting
- Section We 602.30 - Wells Constructed by Excavation: Casing Function and Materials
- Section We 602.31 - Wells Constructed by Excavation: Installation and Placement of Casing
- Section We 602.32 - Wells Constructed by Excavation: Backfill
- Section We 602.33 - Development of Well Yield, Generally
- Section We 602.34 - Development of Well Yield by Hydrofracturing
- Section We 602.35 - Termination of Well Casings Below Ground Surface
- Section We 602.36 - Monitoring Wells
- Section We 602.37 - Closed Loop Geothermal Wells
- Section We 602.38 - Open Loop Geothermal Wells
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.