Alaska Administrative Code
Title 3 - Commerce, Community, and Economic Development
Part 19 - Alcoholic Beverage Control Board
Chapter 306 - Marijuana Control
Article 5 - Marijuana Product Manufacturing Facilities
3 AAC 306.570 - Labeling; of marijuana products

Universal Citation: 3 AK Admin Code 306.570

Current through August 30, 2024

(a) With each production lot of marijuana product sold, a marijuana product manufacturing facility shall disclose in writing the name of the licensed marijuana testing facility that performed any required test and the results of each required test.

(b) A marijuana product may not be labeled as organic.

(c) To each package of marijuana product sold to a retail marijuana store for resale to a consumer, a marijuana product manufacturing facility shall affix a label setting out

(1) the name and license number of the marijuana product manufacturing facility where the marijuana product was prepared;

(2) the production lot number assigned to the product in the package;

(3) the net weight of the product in the package,
(A) not including weight of packaging; and

(B) using a standard of measure compatible with the marijuana product manufacturing facility's marijuana inventory tracking system; and

(4) each of the following statements:
(A) "Marijuana has intoxicating effects and may be habit forming and addictive";

(B) "Marijuana impairs concentration, coordination, and judgment. Do not operate a vehicle or machinery under its influence";

(C) There are health risks associated with consumption of marijuana";

(D) "For use only by adults twenty-one and older. Keep out of the reach of children.";

(E) "Marijuana should not be used by women who are pregnant or breast feeding.".

(d) A marijuana product manufacturing facility transporting a marijuana product to a retail marijuana store shall affix a label to the shipping container showing that a licensed marijuana testing facility has tested each lot of marijuana product in the shipment and giving the test results, including

(1) a cannabinoid potency profile expressed as a range of percentages that extends from the lowest percentage to highest percentage of concentration for each cannabinoid listed from every test conducted on that production lot from the same marijuana product manufacturing facility within the last three months;

(2) a statement listing the results of microbial testing required under 3 AAC 306.645(b)(2);

(3) a statement listing the results of residual solvent testing required under 3 AAC 306.645(b)(3), if applicable; and

(4) a statement listing any contaminants for which the product was tested in addition to contaminants for which 3 AAC 306.645(b) requires testing; any additional tested contaminants include
(A) molds, mildew, and filth;

(B) herbicides, pesticides, and fungicides; and

(C) harmful chemicals.

(e) If a marijuana product manufacturing facility ships wholesale marijuana product from a production lot of marijuana product that has not been tested for each contaminant listed in (d)(4) of this section, the label for that lot must include a statement identifying each contaminant listed in (d)(4) of this section for which that lot has not been tested.

Authority:AS 17.38.010

AS 17.38.070

AS 17.38.121

AS 17.38.150

AS 17.38.190

AS 17.38.200

AS 17.38.900

Disclaimer: These regulations may not be the most recent version. Alaska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.