Federal Aviation Administration April 22, 2024 – Federal Register Recent Federal Regulation Documents

Amendment of Alaskan Very High Frequency Omnidirectional Range Federal Airway V-506 in the Vicinity of Kodiak, AK
Document Number: 2024-08432
Type: Rule
Date: 2024-04-22
Agency: Federal Aviation Administration, Department of Transportation
This action amends Alaskan Very High Frequency Omnidirectional Range Federal airway (VOR) V-506 in the vicinity of Kodiak, AK. The FAA is taking this action due to the loss of signal from the Kodiak, AK, VOR and due to the pending decommissioning of the Hotham, AK, Nondirectional Radio Beacon (NDB).
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2024-08392
Type: Proposed Rule
Date: 2024-04-22
Agency: Federal Aviation Administration, Department of Transportation
The FAA is revising a notice of proposed rulemaking NPRM that would have applied to certain The Boeing Company Model 757-200, -200CB, and -200PF series airplanes. This action revises the NPRM by revising the compliance times for certain airplanes. The FAA is proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions would impose an additional burden over that in the NPRM, the FAA is requesting comments on this SNPRM.
Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes
Document Number: 2024-08539
Type: Rule
Date: 2024-04-22
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding Airworthiness Directive (AD) 2022-21-15 for certain Diamond Aircraft Industries GmbH (DAI) Model DA 42, DA 42 NG, and DA 42 M-NG airplanes. AD 2022-21-15 required replacing the rudder T-yoke axle with an improved rudder T-yoke axle. Since the FAA issued AD 2022-21-15, the European Union Aviation Safety Agency (EASA) superseded its mandatory continuing airworthiness information (MCAI) to correct an unsafe condition on these products. This AD requires, for certain airplanes, inspecting the rudder steering bracket edge distance and depending on the inspection results, inspecting the T-yoke bolt hole for wear and play, and corrective action if necessary. For certain airplanes this AD requires replacing the rudder T-yoke bolt (axle) with a serviceable part, installing a new self-locking nut, and applying torque seal marks on the rudder T-yoke bolt head and self-locking nut. For all airplanes this AD requires repetitively inspecting the torque seal marks on the rudder T-yoke bolt head for proper alignment and the self-locking nut for proper installation and corrective action if necessary. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Airman Certification Standards and Practical Test Standards for Airmen; Incorporation by Reference
Document Number: 2024-08631
Type: Rule
Date: 2024-04-22
Agency: Federal Aviation Administration, Department of Transportation
On April 1, 2024, the Federal Aviation Administration (FAA) published a final rule in the Federal Register to incorporate certain Airman Certification Standards and Practical Test Standards by reference into the certification requirements for pilots, flight instructors, flight engineers, aircraft dispatchers, and parachute riggers. In that final rule, the FAA incorrectly set forth certain regulatory text which, if not corrected, would remove certain content from the Code of Federal Regulations the FAA did not intend to remove. This correction remedies the error.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.